Carbon-Polymer Bio-Nano-Composite Electrodes for Electrochemical Genosensing Marı´a Isabel Pividori and Salvador Alegret

2012 ◽  
pp. 75-120
Keyword(s):  
Composite Electrodes ◽  
Nano Composite

scholarly journals Layered sulfur/PEDOT:PSS nano composite electrodes for lithium sulfur cell applications

2018 ◽  
Vol 442 ◽  
pp. 556-564 ◽  
Author(s):  
K.M. Anilkumar ◽  
B. Jinisha ◽  
M. Manoj ◽  
V.S. Pradeep ◽  
S. Jayalekshmi
Keyword(s):  
Composite Electrodes ◽  
Nano Composite ◽  
Lithium Sulfur

Role of the binder on the failure mechanism of Si nano-composite electrodes for Li-ion batteries

2011 ◽  
Vol 196 (16) ◽  
pp. 6695-6702 ◽  
Author(s):  
D. Munao ◽  
J.W.M. van Erven ◽  
M. Valvo ◽  
E. Garcia-Tamayo ◽  
E.M. Kelder
Keyword(s):  
Failure Mechanism ◽  
Composite Electrodes ◽  
Li Ion Batteries ◽  
Nano Composite ◽  
Li Ion

Preparation of Ru-C Nano-Composite Film by MOCVD and Electrode Properties for Oxygen Gas Sensor

2007 ◽  
Vol 534-536 ◽  
pp. 1485-1488 ◽  
Author(s):  
Teiichi Kimura ◽  
Takashi Goto
Keyword(s):  
Composite Films ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
Ac Conductivities ◽  
Composite Electrodes ◽  
Concentration Cell ◽  
Nano Composite ◽  
Oxygen Gas ◽  
Ysz Electrolyte ◽  
20 Nm

Ru-C nano-composite films were prepared by metal-organic chemical vapor deposition (MOCVD), and their microstructures and their electrode properties for oxygen gas sensors were investigated. Deposited films contained Ru particles of 5-20 nm in diameter dispersed in amorphous C matrix. The AC conductivities associating to the interface charge transfer between Ru-C composite electrode and YSZ electrolyte were 1000-10000 times higher than that of conventional paste-Pt electrodes. The electro-motive-force (emf) values of the oxygen gas concentration cell constructed from the nano-composite electrodes and YSZ electrolyte showed the Nernstian theoretical values at low temperatures around 500 K. The response time of the concentration cell at 500 K was 900 s.

Preparation of C-Ru-RuO2 Nano-Composite Films by Plasma-Enhanced CVD and their Electrode Property

2007 ◽  
Vol 350 ◽  
pp. 155-158 ◽  
Author(s):  
Masato Sakata ◽  
Teiichi Kimura ◽  
Takashi Goto
Keyword(s):  
Electrical Conductivity ◽  
Gas Flow ◽  
Volume Fraction ◽  
Composite Films ◽  
Composite Layer ◽  
Nano Particles ◽  
Composite Electrodes ◽  
Concentration Cell ◽  
Nano Composite ◽  
Oxygen Gas

C-Ru-RuO2 nano-composite films were prepared by plasma-enhanced chemical vapor deposition and their microstructure and electrode properties were investigated. Ru-C nano-composite films consisted of Ru nano-particles of 3 nm in diameter and an amorphous C matrix. With increasing oxygen gas flow rate (FRO2), the volume fraction of C decreased from 0.91 to 0 and Ru nano-particle size increased from 2.5 to 4.5 nm. At high FRO2, the film consisted on the fibrous RuO2 and Ru-C nano-composite layer. Ru-C nano-composite containing 91 vol% C showed the highest interfacial electrical conductivity below 673 K, and Ru-C/RuO2 composite containing 0 – 5 vol% C showed the highest interfacial electrical conductivity at 873 K. Electro-motive-force (EMF) values of an oxygen concentration cell constructed from a YSZ electrolyte and Ru-C or Ru-C/RuO2 composite electrodes responded to the change of oxygen gas partial pressure at more than 473 K. The response time of the concentration cell with Ru-C nano-composite electrodes at 573 K was less than 10 s, and that with Ru-C/RuO2 composite electrodes was about 300 s.

Ru-C Nano-Composite Films Prepared by PECVD as an Electrode for an Oxygen Sensor

2007 ◽  
Vol 352 ◽  
pp. 319-322 ◽  
Author(s):  
Masato Sakata ◽  
Teiichi Kimura ◽  
Takashi Goto
Keyword(s):  
Electrical Properties ◽  
Oxygen Sensor ◽  
Composite Films ◽  
Chemical Vapor ◽  
Composite Electrodes ◽  
Concentration Cell ◽  
Nano Composite ◽  
Microwave Induced Plasma ◽  
Increasing Temperature ◽  
Ysz Electrolyte

Ruthenium-Carbon (Ru-C) nano-composite films were prepared by microwave-induced plasma-enhanced chemical vapor deposition (PECVD) and the effects of deposition conditions on the microstructure and electrical properties were investigated. The films consisted of agglomerated grains of 10 to 20 nm in diameter, in which Ru particles of 2.5 to 3.5 nm in diameter were dispersed in an amorphous C matrix. The C contents of the films ranged from 86 to 94 vol%. The electrical properties of Ru-C nano-composite films as a catalytic electrode for an yttria-stabilized zirconia (YSZ) solid electrolyte were evaluated by AC impedance spectroscopy. The electrical conductivity at the Ru-C/YSZ interface (σi) was 0.2 × 10-3 Sm-1 at 500 K and increased with increasing temperature. The activation energy of the σi was 70 kJ/mol. Electro-motive-force (EMF) values of an oxygen concentration cell constructed from YSZ electrolyte and Ru-C nano-composite electrodes responded to the change of oxygen partial pressure above 473 K. The response time of the concentration cell was less than 10 s above 573 K.

scholarly journals Machine-Learning Aided Evolution Studies of Nano-composite Electrodes and Nano-particle Catalysts for Fuel Cell Applications

2015 ◽  
Vol 21 (S3) ◽  
pp. 1063-1066 ◽  
Author(s):  
David Rossouw ◽  
Lidia E. Chinchilla ◽  
Sagar Prabhudev ◽  
Tyler Trefz ◽  
Natalia Kremliakova ◽  
...  
Keyword(s):  
Machine Learning ◽  
Fuel Cell ◽  
Nano Particle ◽  
Composite Electrodes ◽  
Nano Composite
Sign in / Sign up

Export Citation Format

Share Document