Toolbox for Dispersing Carbon Nanotubes into Polymers to Get Electrically Conductive Nanocomposites

2012 ◽  
pp. 31-33
Keyword(s):  
Carbon Nanotubes ◽  
Electrically Conductive ◽  
Conductive Nanocomposites

scholarly journals Electrically Conductive Nanocomposites Polymer of Poly(Vinyl Alcohol)/Glutaraldehyde/Multiwalled Carbon Nanotubes: Preparation and Characterization

2018 ◽  
Vol 18 (3) ◽  
pp. 383 ◽  
Author(s):  
Fitri Khoerunnisa ◽  
Hendrawan Hendrawan ◽  
Yaya Sonjaya ◽  
Rizki Deli Hasanah
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Polymer Matrix ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
X Ray Diffraction ◽  
Multiwalled Carbon ◽  
Electrically Conductive ◽  
X Ray ◽  
Conductive Nanocomposites

Electrically conductive nanocomposites polymer of poly(vinyl alcohol)/PVA, glutaraldehyde (GA) and multiwalled carbon nanotubes (MWCNT) has been successfully synthesized. The polymer nanocomposites were prepared by mixing PVA, GA (crosslinker), and MWCNT dispersion with an aid of ultrasonic homogenizer at 50 °C. The content of MWCNT, in particular, was varied in order to determine the effect of MWCNT on electrical conductivity of polymer composites. The polymer mixture was casted into a disc to obtain thin film. The electrical conductivity, surface morphology, and mechanical properties of the composites film were investigated by means of four probes method, FTIR spectroscopy, X-ray diffraction, SEM, AFM, and tensile strength measurement, respectively. It was found that the optimum composition of PVA (10%): GA (1%): MWCNT (1%) was 20:20:3 in volume ratio. The addition of MWCNT induced the electrically conductive network on polymer matrix where the electrical conductivity of nanocomposites film significantly increased up to 8.28 x 10-2 S/sq due to reduction of the contact resistance between conductive filler. Additionally, the mechanical strength of nanocomposites polymer were significantly increased as a result of MWCNT addition. Modification of morphological structure of composite film as indicated by FTIR spectra, X-ray diffraction patterns, SEM, and AFM images verified the effective MWCNT filler network in the polymer matrix.

scholarly journals Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1875
Author(s):  
Alexander Yu. Gerasimenko ◽  
Artem V. Kuksin ◽  
Yury P. Shaman ◽  
Evgeny P. Kitsyuk ◽  
Yulia O. Fedorova ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Laser Irradiation ◽  
Flexible Electronics ◽  
Threshold Energy ◽  
Wavelength Region ◽  
Hybrid Nanostructures ◽  
Graphene Sheets ◽  
Electrically Conductive ◽  
Walled Carbon Nanotubes

A technology for the formation of electrically conductive nanostructures from single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), and their hybrids with reduced graphene oxide (rGO) on Si substrate has been developed. Under the action of single pulses of laser irradiation, nanowelding of SWCNT and MWCNT nanotubes with graphene sheets was obtained. Dependences of electromagnetic wave absorption by films of short and long nanotubes with subnanometer and nanometer diameters on wavelength are calculated. It was determined from dependences that absorption maxima of various types of nanotubes are in the wavelength region of about 266 nm. It was found that contact between nanotube and graphene was formed in time up to 400 fs. Formation of networks of SWCNT/MWCNT and their hybrids with rGO at threshold energy densities of 0.3/0.5 J/cm2 is shown. With an increase in energy density above the threshold value, formation of amorphous carbon nanoinclusions on the surface of nanotubes was demonstrated. For all films, except the MWCNT film, an increase in defectiveness after laser irradiation was obtained, which is associated with appearance of C–C bonds with neighboring nanotubes or graphene sheets. CNTs played the role of bridges connecting graphene sheets. Laser-synthesized hybrid nanostructures demonstrated the highest hardness compared to pure nanotubes. Maximum hardness (52.7 GPa) was obtained for MWCNT/rGO topology. Regularity of an increase in electrical conductivity of nanostructures after laser irradiation has been established for films made of all nanomaterials. Hybrid structures of nanotubes and graphene sheets have the highest electrical conductivity compared to networks of pure nanotubes. Maximum electrical conductivity was obtained for MWCNT/rGO hybrid structure (~22.6 kS/m). Networks of nanotubes and CNT/rGO hybrids can be used to form strong electrically conductive interconnections in nanoelectronics, as well as to create components for flexible electronics and bioelectronics, including intelligent wearable devices (IWDs).

Electrically conductive transparent papers using multiwalled carbon nanotubes

2008 ◽  
Vol 46 (12) ◽  
pp. 1235-1242 ◽  
Author(s):  
Rira Jung ◽  
Hun-Sik Kim ◽  
Yeseul Kim ◽  
Soon-Min Kwon ◽  
Heon Sang Lee ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Multiwalled Carbon ◽  
Electrically Conductive

THE PROSPECTS OF USING CARBON NANOTUBES TO IMPART FUNCTIONAL PROPERTIES TO THE SURFACE OF POLYMER MATERIALS (review)

2021 ◽  
pp. 11-21
Author(s):  
L.V. Solovyanchik ◽  
◽  
S.V. Kondrashov ◽  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Properties ◽  
Functional Properties ◽  
Scientific Literature ◽  
Conductive Polymer ◽  
Polymer Materials ◽  
Mechanism Of Formation ◽  
Electrically Conductive ◽  
Structured Surface

Presents a review of the scientific literature on various methods for producing electrically conductive polymer materials and coatings. The prospects of using carbon nanotubes (CNT) to impart high electrical properties to the surface of materials are shown. The mechanism of formation of the structured surface of polymer materials with CNT is described. It is shown that the use of CNT is a promising way to impart electrically conductive and superhydrophobic properties to the surface.

Carbon nanotubes: a promise for nerve tissue engineering?

2013 ◽  
Vol 2 (1) ◽  
pp. 47-57 ◽  
Author(s):  
Susanna Bosi ◽  
Alessandra Fabbro ◽  
Laura Ballerini ◽  
Maurizio Prato
Keyword(s):  
Carbon Nanotubes ◽  
Chemical Properties ◽  
Neural Tissue ◽  
Nerve Tissue ◽  
Physical And Chemical Properties ◽  
Electrically Conductive ◽  
Tissue Interface ◽  
Biomedical Field ◽  
Physical And Chemical ◽  
And Chemical Properties

AbstractOwing to their peculiar physical and chemical properties, carbon nanotubes are intensively studied for many different applications, including those in the biomedical field. Carbon nanotubes are electrically conductive, elastic but mechanically resistant and these features, among others, have made them an ideal material for therapeutic applications at the neural tissue interface. The major recent advances in the study of carbon nanotube-based materials aimed at nerve tissue regeneration and functional recovery are reviewed here.

Sign in / Sign up

Export Citation Format

Share Document