Complex Nanostructure Growth Based on Laser Ablation in Liquid and Sequential Self-Assembly Process

2012 ◽  
pp. 793-838
Keyword(s):  
Laser Ablation ◽  
Self Assembly ◽  
Assembly Process ◽  
Laser Ablation In Liquid ◽  
Complex Nanostructure

Preparation of BSA Nanoparticles by Desolvation Technique Using Acetone as Desolvating Agent

2012 ◽  
Vol 5 (1) ◽  
pp. 1643-1647
Author(s):  
Krishna Sailaja A ◽  
Amareshwar P
Keyword(s):  
Aqueous Solution ◽  
Standard Deviation ◽  
Process Parameters ◽  
Self Assembly ◽  
Size Control ◽  
Polymeric Materials ◽  
Preparation Condition ◽  
Assembly Process ◽  
Average Size

In order to see the functionality and toxicity of nanoparticles in various food and drug applications, it is important to establish procedures to prepare nanoparticles of a controlled size. Desolvation is a thermodynamically driven self-assembly process for polymeric materials. In this study, we prepared BSA nanoparticles using the desolvation technique using acetone as desolvating agent. Acetone was added intermittently into 1% BSA solution at different pH under stirring at 700 rpm. Amount of acetone added, intermittent timeline of acetone addition, and pH of solution were considered as process parameters to be optimized. The effect of the process parameters on size of the nanoparticles was studied. The results indicated that the size control of BSA nanoparticles was achieved by adding acetone intermittently. The standard deviation of average size of BSA nanoparticles at each preparation condition was minimized by adding acetone intermittently. The intermittent addition in polymeric aqueous solution can be useful for size control for food or drug applications.  

scholarly journals Interfacial Crystallization and Supramolecular Self-Assembly of Spider Silk Inspired Protein at the Water-Air Interface

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4239
Author(s):  
Pezhman Mohammadi ◽  
Fabian Zemke ◽  
Wolfgang Wagermaier ◽  
Markus B. Linder
Keyword(s):  
Self Assembly ◽  
Spider Silk ◽  
Assembly Process ◽  
Protein Solution ◽  
Time Resolved ◽  
Macromolecular Assembly ◽  
X Ray Scattering ◽  
Air Interface ◽  
Fundamental Research ◽  
Β Sheet

Macromolecular assembly into complex morphologies and architectural shapes is an area of fundamental research and technological innovation. In this work, we investigate the self-assembly process of recombinantly produced protein inspired by spider silk (spidroin). To elucidate the first steps of the assembly process, we examined highly concentrated and viscous pendant droplets of this protein in air. We show how the protein self-assembles and crystallizes at the water–air interface into a relatively thick and highly elastic skin. Using time-resolved in situ synchrotron X-ray scattering measurements during the drying process, we showed that the skin evolved to contain a high β-sheet amount over time. We also found that β-sheet formation strongly depended on protein concentration and relative humidity. These had a strong influence not only on the amount, but also on the ordering of these structures during the β-sheet formation process. We also showed how the skin around pendant droplets can serve as a reservoir for attaining liquid–liquid phase separation and coacervation from the dilute protein solution. Essentially, this study shows a new assembly route which could be optimized for the synthesis of new materials from a dilute protein solution and determine the properties of the final products.

scholarly journals Short-Pulse Lasers: A Versatile Tool in Creating Novel Nano-/Micro-Structures and Compositional Analysis for Healthcare and Wellbeing Challenges

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 712
Author(s):  
Ahmed Al-Kattan ◽  
David Grojo ◽  
Christophe Drouet ◽  
Alexandros Mouskeftaras ◽  
Philippe Delaporte ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Surface Engineering ◽  
Short Pulse ◽  
Chemical Properties ◽  
Compositional Analysis ◽  
Periodic Patterns ◽  
Laser Ablation In Liquid ◽  
Micro Scale ◽  
Direct Laser ◽  
Contact Free

Driven by flexibility, precision, repeatability and eco-friendliness, laser-based technologies have attracted great interest to engineer or to analyze materials in various fields including energy, environment, biology and medicine. A major advantage of laser processing relies on the ability to directly structure matter at different scales and to prepare novel materials with unique physical and chemical properties. It is also a contact-free approach that makes it possible to work in inert or reactive liquid or gaseous environment. This leads today to a unique opportunity for designing, fabricating and even analyzing novel complex bio-systems. To illustrate this potential, in this paper, we gather our recent research on four types of laser-based methods relevant for nano-/micro-scale applications. First, we present and discuss pulsed laser ablation in liquid, exploited today for synthetizing ultraclean “bare” nanoparticles attractive for medicine and tissue engineering applications. Second, we discuss robust methods for rapid surface and bulk machining (subtractive manufacturing) at different scales by laser ablation. Among them, the microsphere-assisted laser surface engineering is detailed for its appropriateness to design structured substrates with hierarchically periodic patterns at nano-/micro-scale without chemical treatments. Third, we address the laser-induced forward transfer, a technology based on direct laser printing, to transfer and assemble a multitude of materials (additive structuring), including biological moiety without alteration of functionality. Finally, the fourth method is about chemical analysis: we present the potential of laser-induced breakdown spectroscopy, providing a unique tool for contact-free and space-resolved elemental analysis of organic materials. Overall, we present and discuss the prospect and complementarity of emerging reliable laser technologies, to address challenges in materials’ preparation relevant for the development of innovative multi-scale and multi-material platforms for bio-applications.

scholarly journals Self-Assembled Nanomaterials Based on Complementary Sn(IV) and Zn(II)-Porphyrins, and Their Photocatalytic Degradation for Rhodamine B Dye

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3598
Author(s):  
Nirmal K. Shee ◽  
Hee-Joon Kim
Keyword(s):  
Aqueous Solution ◽  
Visible Light Irradiation ◽  
Rhodamine B ◽  
Self Assembly ◽  
The Self ◽  
Assembly Process ◽  
Absorption Bands ◽  
Ligand Coordination ◽  
Rhodamine B Dye ◽  
Metal Ligand

A series of porphyrin triads (1–6), based on the reaction of trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP) with six different phenoxy Zn(II)-porphyrins (ZnLn), was synthesized. The cooperative metal–ligand coordination of 3-pyridyl nitrogens in the SnP with the phenoxy Zn(II)-porphyrins, followed by the self-assembly process, leads to the formation of nanostructures. The red-shifts and remarkable broadening of the absorption bands in the UV–vis spectra for the triads in CHCl3 indicate that nanoaggregates may be produced in the self-assembly process of these triads. The emission intensities of the triads were also significantly reduced due to the aggregation. Microscopic analyses of the nanostructures of the triads reveal differences due to the different substituents on the axial Zn(II)-porphyrin moieties. All these nanomaterials exhibited efficient photocatalytic performances in the degradation of rhodamine B (RhB) dye under visible light irradiation, and the degradation efficiencies of RhB in aqueous solution were observed to be 72~95% within 4 h. In addition, the efficiency of the catalyst was not impaired, showing excellent recyclability even after being applied for the degradation of RhB in up to five cycles.

scholarly journals Template-free, single step preparation of hollow Coo nano spheres using pulsed laser ablation in liquid environment

2021 ◽  
pp. 103317
Author(s):  
Muidh Alheshibri ◽  
Sultan Akhtar ◽  
Abbad Al Baroot ◽  
Khaled Elsayed ◽  
Hassan S Al Qahtani ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Single Step ◽  
Laser Ablation In Liquid ◽  
Liquid Environment ◽  
Template Free

scholarly journals Metal Oxide-Related Dendritic Structures: Self-Assembly and Applications for Sensor, Catalysis, Energy Conversion and Beyond

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1686
Author(s):  
Ruohong Sui ◽  
Paul A. Charpentier ◽  
Robert A. Marriott
Keyword(s):  
Metal Oxide ◽  
Energy Conversion ◽  
Self Assembly ◽  
Hierarchical Structures ◽  
The Self ◽  
Assembly Process ◽  
Electronic Noses ◽  
Dendritic Nanostructures ◽  
Energy Conversion And Storage ◽  
The Aesthetic

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.

Sign in / Sign up

Export Citation Format

Share Document