The theoretical study on enhanced oil recovery of high concentration polymer

2010 ◽  
pp. 325-331
Author(s):  
Y Liu ◽  
S Liu ◽  
S Liang ◽  
H Wen
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Theoretical Study ◽  
High Concentration

scholarly journals Experimental Investigation of Chemical Flooding Using Nanoparticles and Polymer on Displacement of Crude Oil for Enhanced Oil Recovery

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Imran Akbar ◽  
Hongtao Zhou ◽  
Wei Liu ◽  
Muhammad Usman Tahir ◽  
Asadullah Memon ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Petroleum Industry ◽  
Chemical Flooding ◽  
Polymer Gel ◽  
Core Flooding ◽  
High Concentration ◽  
Remaining Oil ◽  
Water Cut

In the petroleum industry, the researchers have developed a new technique called enhanced oil recovery to recover the remaining oil in reservoirs. Some reservoirs are very complex and require advanced enhanced oil recovery (EOR) techniques containing new materials and additives in order to produce maximum oil in economic and environmental friendly manners. In this work, the effects of nanosuspensions (KY-200) and polymer gel HPAM (854) on oil recovery and water cut were studied in the view of EOR techniques and their results were compared. The mechanism of nanosuspensions transportation through the sand pack was also discussed. The adopted methodology involved the preparation of gel, viscosity test, and core flooding experiments. The optimum concentration of nanosuspensions after viscosity tests was used for displacement experiments and 3 wt % concentration of nanosuspensions amplified the oil recovery. In addition, high concentration leads to more agglomeration; thus, high core plugging takes place and diverts the fluid flow towards unswept zones to push more oil to produce and decrease the water cut. Experimental results indicate that nanosuspensions have the ability to plug the thief zones of water channeling and can divert the fluid flow towards unswept zones to recover the remaining oil from the reservoir excessively rather than the normal polymer gel flooding. The injection pressure was observed higher during nanosuspension injection than polymer gel injection. The oil recovery was achieved by about 41.04% from nanosuspensions, that is, 14.09% higher than polymer gel. Further investigations are required in the field of nanoparticles applications in enhanced oil recovery to meet the world's energy demands.

Theoretical Study on Oil Bank for Chemical Enhanced Oil Recovery

2021 ◽  
Author(s):  
G. Chen ◽  
X. Zhang ◽  
M. Ma ◽  
K. Lu ◽  
X. Su ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Theoretical Study

scholarly journals Supercritical CO2-involved water–rock interactions at 85℃ and partial pressures of 10–20 MPa: Sequestration and enhanced oil recovery

2017 ◽  
Vol 35 (2) ◽  
pp. 237-258 ◽  
Author(s):  
Xiaoyu Wang ◽  
Xiaolin Wang ◽  
Wenxuan Hu ◽  
Ye Wan ◽  
Jian Cao ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Interaction Mechanism ◽  
Recovery Process ◽  
Sample Surface ◽  
Mineral Dissolution ◽  
Reservoir Rock ◽  
Formation Water ◽  
High Concentration ◽  
Rock Interaction

Studying the interactions between CO2-rich fluid and reservoir rock under reservoir temperature and pressure is important for investigating CO2 sequestration and the CO2-enhanced oil recovery processes. Using high-concentration CaCl2-type formation water as an example, this study performed a CO2-rich fluid–rock interaction experiment at 85℃ and compared the dissolution of calcite and sandstone samples, as well as sandstone powder and thin-slice samples. This study also investigated the effects of the sample surface area, the CO2 partial pressure ( PCO2 = 10 and 20 MPa), and the composition of formation water (3 mol/kg NaCl and 1 mol/kg CaCl2–2 mol/kg NaCl) on the water–rock interaction mechanism and process by weighing, ion chromatography, and scanning electron microscopy observations. The results showed that the injection of CO2 resulted in the dissolution of reservoir minerals such as carbonate cements and feldspar. The mineral dissolution increased with increasing PCO2. The dissolution of minerals such as calcite in the CaCl2-type formation water was significantly decreased because of the high concentration of Ca2+. Under the same conditions, more sandstone dissolved than calcite and more sandstone powder dissolved than sandstone thin slices. Dissolution of the potassium feldspar occurred in the sandstone, whereas the albite was nearly unaffected. No new minerals formed during the experimental process. The experimental results and a PHREEQC calculation demonstrated that the injection of CO2 causes a significant pH drop in the formation water, which improves the porosity and permeability of the reservoir, increases the capacity of the reservoir to store CO2, and facilitates the progression of the CO2-enhanced oil recovery process. However, if alkaline minerals in the caprocks of the reservoir are also dissolved by the CO2-rich fluid, the sealing capacity of the caprocks may be reduced.

Computational Modeling of the Influence of Geminal Zwitterionic Liquids on Changes in the Parameters of Wetting of Oil-Rock System

2012 ◽  
Vol 1473 ◽  
Author(s):  
Ernesto Lopez-Chavez ◽  
Luis Silvestre Zamudio-Rivera ◽  
Jose Manuel Martinez-Magadan ◽  
Eduardo Buenrostro-Gonzalez ◽  
Raúl Hernández-Altamirano
Keyword(s):  
Interfacial Tension ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Theoretical Study ◽  
Reservoir Rock ◽  
Wettability Alteration ◽  
Rock System ◽  
Reservoir Conditions ◽  
Low Interfacial Tension ◽  
Limestone Rock

ABSTRACTZwitterionic liquid (ZL) molecules are considered among the surfactant molecular species used in enhanced oil recovery (EOR). The surface activity of asphaltenes (ASP) is crucial for establishing reservoir rock wettability, which impacts enhanced oil recovery (EOR) process. The key to a successful EOR formulation is to carefully select the components that provide ultra-low interfacial tension (IFT) under reservoir conditions. Achieving ultra-low IFT greatly reduces capillary forces that trap oil. The objective of this work is the theoretical study of the influence of a class of germinal zwitterionic liquid on interfacial tension or changes on wettability of the oil-rock system under reservoir conditions. The ZL molecule used in this study was designed by Zamudio et al; while the asphaltene model was originally proposed by Buenrostro-González. Methods of molecular mechanics and dynamics were used in order to calculate interaction energies of all systems. The results indicate that the ZL molecule adheres more strongly to the limestone-rock than the asphaltene molecule does. In addition, our results suggest that the ion-pair formation is the dominant wettability alteration mechanism.

scholarly journals Removal of Oil and Heavy Metals from Oily Sludge using Esterquat Surfactant via Surfactant-Enhanced Oil Recovery (SEOR)

2019 ◽  
Vol 8 (4) ◽  
pp. 6912-6917
Keyword(s):  
Heavy Metal ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Oily Sludge ◽  
Human Beings ◽  
High Concentration ◽  
Conductivity Method ◽  
Refinery Plant

Oily sludge is one of the most significant solid waste materials generated by petroleum refinery plant. Due to high concentration of petroleum hydrocarbon (PHCs) that is considered as harmful and hazardous waste to human beings and environmental, the initiative was developed to minimize this issue by performing investigation on cationic plant-based esterquat surfactant for oil recovery and heavy metal removal from oily sludge via Surfactant-enhanced Oil Recovery (SEOR). Based on the research finding, oily sludge has significant amount of volatile matters (32.22 wt%) which consists of hazardous PAHs that needs to be removed from oily sludge. Cationic esterquat surfactant has been introduced in removal of heavy metal and oil from oily sludge. Result shows the CMCs of cationic esterquat surfactant obtained was about 125mg/L via conductivity method and spectrophotometric method. The percentage of oil recovery obtained was 74.62% at esterquat concentration of 125 mg/L with significant removal on chromium (Cr) and lead (Pb). This finding shows the potential of cationic esterquat surfactant in enhancing the oil and metal removal from oily sludge.

Characterization of Bacillus Licheniformis Strain Ta62bi as Potential Selective Plugging Agent for Enchanced Oil Recovery

2013 ◽  
Vol 62 (2) ◽  
Author(s):  
Fareh Nunizawati Daud ◽  
Mohd Nazrin Johari ◽  
Arifah Bahar ◽  
Ahmad Kamal Idris ◽  
Adibah Yahya
Keyword(s):  
Enhanced Oil Recovery ◽  
Bacillus Licheniformis ◽  
Oil Recovery ◽  
Oil Quality ◽  
Future Research ◽  
High Concentration ◽  
Rich Condition ◽  
Polycyclic Aromatic ◽  
And Control

Bacterial plugging agents for microbial enhanced oil recovery were peviously studied using non-hydrocarbon substrate. They lacked the ability to survive and form stable plug at high concentration of hydrocarbon compounds. As an alternative, hydrocarbon was used as substrate to determine the bacterial potential as plugging agent. In this study, Bacillus licheniformis Ta62bi was used to study the potential of the bacteria as plugging agent in polycyclic aromatic hydrocarbon (PAH)-rich condition. Three responses (growth, exopolysaccharides (EPS) and PAH consumption) were analyzed. The survivability pattern was observed at 72 hours. From the analysis, pyrene was the best PAH compared to naphthalene. It was based on increment of 214% (415 CFU/mL) in growth and 30% (0.759 g/L) in EPS production. However, the consumption of soluble PAH (0.002 to 0.015 mg/L) was low. The assimilation of hydrocarbon by potential bacterial plugging agent is the only means of survival. Otherwise, it would degrade to a great extent the oil components that  would lead to the reduction of the oil quality. Next, a two-level factorial design was conducted to analyze the effects of different concentration of pyrene (0.1 to 10 g/L) and temperatures (27°C to 50°C) to the responses. The results showed that both factors significantly affect the responses (P < 0.05). Both factors inhibited growth of bacterium Ta62bi. As the PAH concentration was  increased, the EPS production and PAH consumption was also found to increase at 27˚C.  At 50°C, there was an increase  in the EPS production but not in the PAH consumption. Therefore, EPS might be implied to having an important role in the tolerance of the TA62bi strain towards hydrocarbon. The findings will be further used  in future research as a model to predict and control  enhanced oil recovery plugging mechanism.

Preculaatities of evaluation of the effectiveness of flow deflection technologies

2018 ◽  
pp. 93-101
Author(s):  
A. A. Kazakov ◽  
V. V. Chelepov ◽  
R. G. Ramazanov
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Production Well ◽  
Oil Companies ◽  
Efficiency Calculation ◽  
Petroleum Companies ◽  
Flow Deflection ◽  
Recovery Methods

The features of evaluation of the effectiveness of flow deflection technologies of enhanced oil recovery methods. It is shown that the effect of zeroing component intensification of fluid withdrawal leads to an overestimation of the effect of flow deflection technology (PRP). Used in oil companies practice PRP efficiency calculation, which consists in calculating the effect on each production well responsive to subsequent summation effects, leads to the selective taking into account only the positive components of PRP effect. Negative constituents — not taken into account and it brings overestimate over to overstating of efficiency. On actual examples the groundless overstating and understating of efficiency is shown overestimate at calculations on applied in petroleum companies by a calculation.

Sign in / Sign up

Export Citation Format

Share Document