Study on the wall rock stability ofYantan hydrologic station’s underground caverns

2011 ◽  
pp. 459-463
Author(s):  
J Zhu ◽  
H Wang ◽  
Y Gao ◽  
X Xue ◽  
J Lian
Keyword(s):  
Wall Rock ◽  
Rock Stability ◽  
Underground Caverns

In Situ Stress Measurement and Surrounding Rock Stability Analysis of the Gaoligong Mountain Tunnel

2014 ◽  
Vol 501-504 ◽  
pp. 1766-1773
Author(s):  
Lin Hai Bao
Keyword(s):  
Large Deformation ◽  
Principal Stress ◽  
Stress Measurement ◽  
Pressure Coefficient ◽  
Horizontal Stress ◽  
Wall Rock ◽  
In Situ Stress ◽  
Rock Stability ◽  
Mountain Tunnel

Gaoligong Mountain tunnel is the key project in the Dali-Ruili Railway. In order to optimize the design and guide construction, In-situ stress has been conducted in five boreholes using hydraulic fracturing method, the current shallow crustal in-situ stress state at the project area are obtained according to the measurements results, and deep in-situ stress is predicted using lateral pressure coefficient. The test results show that at depths ranging from 299-979m, the maximum horizontal principal stress is 5.33-30.12Mpa, the minimum horizontal principal stress is 4.94-23.11Mpa, the horizontal principal stress reach 30Mpa at maximum the depth of burial, indicating that the engineering stress filed is dominated by horizontal stress. Based on the In-situ stress data and different distinguish methods, rockburst and large deformation are predicted. The results show that In-situ stress magnitude in this area is classified as high level, and the direction of the maximum horizontal stress is NEE, In-situ stress orientation is conductive to stable of the tunnel. When the tunnel passes through the deep-burial and hard rock, the wall rock may happen rockburst; and the large deformation may happen when the tunnel pass through the weak rock. In order to avoid the disadvantage conditions, reasonable excavation method and safety support method should be adopted during tunnel excavating.

Research of Tunnel Excavation Support Techniques

2015 ◽  
Vol 777 ◽  
pp. 85-87
Author(s):  
Hong Tao Niu
Keyword(s):  
Wall Rock ◽  
Specific Method ◽  
Tunnel Excavation ◽  
Construction Machinery ◽  
Rock Types ◽  
Rock Stability ◽  
Cut Method ◽  
Excavation Support ◽  
Rock Tunnel ◽  
Depth Of Burial

with the development of transportation infrastructure construction in the west, more and more excavation and support of all kinds of mountain tunnel been encountered in the project. Specific method of excavation and support should be ascertained according to tunnel types, size of section, depth of burial, wall rock types, hydrological condition, and construction machinery. Different excavation method will get different effect of wall rock stability .at present, there are variety of flaccid wall rock tunnel construction processes and methods, such as bench cutting method, ring cut method, CD method and CDR method, etc.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

Sign in / Sign up

Export Citation Format

Share Document