Cell Sheet Nano Technology

2011 ◽  
pp. 25-44
Author(s):  
Yuji Haraguchi ◽  
Tatsuya Shimizu ◽  
Masayuki Yamato ◽  
Ross Hunter ◽  
Teruo Okano
Keyword(s):  
Cell Sheet ◽  
Nano Technology

A Method for Electron Microscopic Study of Tissue Culture Cell Monolayers Grown in Tubes

1967 ◽  
Vol 25 ◽  
pp. 132-133
Author(s):  
R. Stephens ◽  
G. Schidlovsky ◽  
S. Kuzmic ◽  
P. Gaudreau
Keyword(s):  
Electron Microscopy ◽  
Tissue Culture ◽  
Light Microscopy ◽  
Cell Sheet ◽  
Culture Cell ◽  
Tissue Culture Cell ◽  
Electron Microscopic ◽  
Cell Sheets ◽  
Morphological Alterations ◽  
Culture Cells

The usual method of scraping or trypsinization to detach tissue culture cell sheets from their glass substrate for further pelletization and processing for electron microscopy introduces objectionable morphological alterations. It is also impossible under these conditions to study a particular area or individual cell which have been preselected by light microscopy in the living state.Several schemes which obviate centrifugation and allow the embedding of nondetached tissue culture cells have been proposed. However, they all preserve only a small part of the cell sheet and make use of inverted gelatin capsules which are in this case difficult to handle.We have evolved and used over a period of several years a technique which allows the embedding of a complete cell sheet growing at the inner surface of a tissue culture roller tube. Observation of the same cell by light microscopy in the living and embedded states followed by electron microscopy is performed conveniently.

IN VITRO METHODS FOR THE STUDY OF THE ADENOHYPOPHYSIAL FUNCTIONS TO SECRETE GONADOTROPHIN

1971 ◽  
Vol 68 (1_Suppl) ◽  
pp. S27-S40 ◽  
Author(s):  
T. Kobayashi ◽  
T. Kigawa ◽  
M. Mizuno ◽  
T. Watanabe
Keyword(s):  
Cell Culture ◽  
Organ Culture ◽  
Cultured Cells ◽  
Cell Sheet ◽  
Short Term ◽  
Hypothalamic Extract ◽  
Numerous Cell ◽  
Single Cell Culture ◽  
Almost All

ABSTRACT There are several in vitro methods to analyse the function of the adenohypophysis or the mechanisms of its regulation. The present paper deals with single cell culture, organ culture and short term incubation techniques by which the morphology and gonadotrophin-secreting function of the adenohypophysis were studied. In trypsin-dispersed cell culture, the adenohypophysial cells showed extensive propagation to form numerous cell colonies and finally develop into a confluent monolayer cell sheet covering completely the surface of culture vessels. Almost all of the cultured cells, however, became chromophobic, at least at the end of the first week of cultivation, when gonadotrophin was detectable neither in the culture medium nor in the cells themselves. After the addition of the hypothalamic extract, gonadotrophin became detectable again, and basophilic or PAS-positive granules also reappeared within the cells, suggesting that the gonadotrophs were stimulated by the extract to produce gonadotrophin. In organ culture and short term incubation, the incorporation of [3H] leucine into the adenohypophysial cells in relation to the addition of hypothalamic extract was examined. It was obvious that the ability to incorporate [3H] leucine into the gonadotrophs in vitro was highly dependent upon the presence of the hypothalamic extract.

Nano-Technology for Asphaltenes Inhibition in Cupiagua South Wells

2014 ◽  
Author(s):  
Oscar Botero ◽  
Liliana Guarin ◽  
Edgar Mora ◽  
Farid Cortes ◽  
Carlos Franco ◽  
...  
Keyword(s):  
Nano Technology

Self-Assembled Fluid Phase Floating Membranes with Tuneable Water Interlayers

2019 ◽  
Author(s):  
Luke Clifton ◽  
Nicoló Paracini ◽  
Arwel V. Hughes ◽  
Jeremy H. Lakey ◽  
Nina-Juliane Seinke ◽  
...  
Keyword(s):  
Fluid Phase ◽  
Interlayer Thickness ◽  
Supported Bilayers ◽  
Self Assembled Monolayer ◽  
High Coverage ◽  
Nano Technology ◽  
Surface Distance ◽  
Potential Applications ◽  
Self Assembled ◽  
Coated Surfaces

<p>We present a reliable method for the fabrication of fluid phase unsaturated bilayers which are readily self-assembled on charged self-assembled monolayer (SAM) surfaces producing high coverage floating supported bilayers where the membrane to surface distance could be controlled with nanometer precision. Vesicle fusion was used to deposit the bilayers onto anionic SAM coated surfaces. Upon assembly the bilayer to SAM solution interlayer thickness was 7-10 Å with evidence suggesting that this layer was present due to SAM hydration repulsion of the bilayer from the surface. This distance could be increased using low concentrations of salts which caused the interlayer thickness to enlarge to ~33 Å. Reducing the salt concentration resulted in a return to a shorter bilayer to surface distance. These accessible and controllable membrane models are well suited to a range of potential applications in biophysical studies, bio-sensors and Nano-technology.</p><br>

Nano-technology, nanomedicine, nanoophthalmology (information 1)

2009 ◽  
Vol 21 (5) ◽  
pp. 69-76
Author(s):  
N. Paseshnikova ◽  
◽  
E. Maltsev ◽  
O. Moroz ◽  
◽  
...  
Keyword(s):  
Nano Technology

Nanomechanical Characterization in the FIB

2005 ◽  
Author(s):  
Thomas M. Moore
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Materials Characterization ◽  
Depth Of Focus ◽  
Ion Milling ◽  
Nano Technology ◽  
Physical Behavior ◽  
Nanomechanical Testing ◽  
Load Cells ◽  
Scanning Electron

Abstract The availability of the focused ion beam (FIB) microscope with its excellent imaging resolution, depth of focus and ion milling capability has made it an appealing platform for materials characterization at the sub-micron, or "nano" level. This article focuses on nanomechanical characterization in the FIB, which is an extension of the FIB capabilities into the realm of nano-technology. It presents examples that demonstrate the power and flexibility of nanomechanical testing in the FIB or scanning electron microscope with a probe shaft that includes a built-in strain gauge. Loads that range from grams to micrograms are achievable. Calibration is limited only by the availability of calibrated load cells in the smallest load ranges. Deflections in the range of a few nanometers range can be accurately applied. Simultaneous electrical, mechanical, and visual data can be combined to provide a revealing study of physical behavior of complex and dynamic nanostructures.

Biocompatible Polymers and their Potential Biomedical Applications: A Review

2019 ◽  
Vol 25 (34) ◽  
pp. 3608-3619 ◽  
Author(s):  
Uzma Arif ◽  
Sajjad Haider ◽  
Adnan Haider ◽  
Naeem Khan ◽  
Abdulaziz A. Alghyamah ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Side Effects ◽  
Biomedical Applications ◽  
Living System ◽  
Health Condition ◽  
The Body ◽  
Biocompatible Polymers ◽  
Nano Technology ◽  
Artificial Grafts ◽  
Immunological Reactions

Background: Biocompatible polymers are gaining great interest in the field of biomedical applications. The term biocompatibility refers to the suitability of a polymer to body and body fluids exposure. Biocompatible polymers are both synthetic (man-made) and natural and aid in the close vicinity of a living system or work in intimacy with living cells. These are used to gauge, treat, boost, or substitute any tissue, organ or function of the body. A biocompatible polymer improves body functions without altering its normal functioning and triggering allergies or other side effects. It encompasses advances in tissue culture, tissue scaffolds, implantation, artificial grafts, wound fabrication, controlled drug delivery, bone filler material, etc. Objectives: This review provides an insight into the remarkable contribution made by some well-known biopolymers such as polylactic-co-glycolic acid, poly(ε-caprolactone) (PCL), polyLactic Acid, poly(3- hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), Chitosan and Cellulose in the therapeutic measure for many biomedical applications. Methods: : Various techniques and methods have made biopolymers more significant in the biomedical fields such as augmentation (replaced petroleum based polymers), film processing, injection modeling, blow molding techniques, controlled / implantable drug delivery devices, biological grafting, nano technology, tissue engineering etc. Results: The fore mentioned techniques and other advanced techniques have resulted in improved biocompatibility, nontoxicity, renewability, mild processing conditions, health condition, reduced immunological reactions and minimized side effects that would occur if synthetic polymers are used in a host cell. Conclusion: Biopolymers have brought effective and attainable targets in pharmaceutics and therapeutics. There are huge numbers of biopolymers reported in the literature that has been used effectively and extensively.

Sign in / Sign up

Export Citation Format

Share Document