Probabilistic demand model based on the virtual work method and fragility estimates for offshore wind turbine support structures

2011 ◽  
pp. 1200-1205
Author(s):  
M Mardfekri ◽  
P Gardoni ◽  
J Roesset
Keyword(s):  
Wind Turbine ◽  
Virtual Work ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Support Structures ◽  
Demand Model ◽  
Model Based ◽  
Work Method

Fatigue Life Analysis of Offshore Wind Turbine Support Structures in an Offshore Wind Farm

2018 ◽  
Author(s):  
Bryan Nelson ◽  
Yann Quéméner
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
The Body ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Analysis Tool ◽  
Support Structures ◽  
Offshore Wind Farm ◽  
Actuator Disk

This study evaluated, by time-domain simulations, the fatigue lives of several jacket support structures for 4 MW wind turbines distributed throughout an offshore wind farm off Taiwan’s west coast. An in-house RANS-based wind farm analysis tool, WiFa3D, has been developed to determine the effects of the wind turbine wake behaviour on the flow fields through wind farm clusters. To reduce computational cost, WiFa3D employs actuator disk models to simulate the body forces imposed on the flow field by the target wind turbines, where the actuator disk is defined by the swept region of the rotor in space, and a body force distribution representing the aerodynamic characteristics of the rotor is assigned within this virtual disk. Simulations were performed for a range of environmental conditions, which were then combined with preliminary site survey metocean data to produce a long-term statistical environment. The short-term environmental loads on the wind turbine rotors were calculated by an unsteady blade element momentum (BEM) model of the target 4 MW wind turbines. The fatigue assessment of the jacket support structure was then conducted by applying the Rainflow Counting scheme on the hot spot stresses variations, as read-out from Finite Element results, and by employing appropriate SN curves. The fatigue lives of several wind turbine support structures taken at various locations in the wind farm showed significant variations with the preliminary design condition that assumed a single wind turbine without wake disturbance from other units.

State-of-the-art design processes for offshore wind turbine support structures

Stahlbau ◽  
2016 ◽  
Vol 85 (9) ◽  
pp. 583-590 ◽  
Author(s):  
Marc Seidel ◽  
Sven Voormeeren ◽  
Jan-Bart van der Steen
Keyword(s):  
Wind Turbine ◽  
State Of The Art ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Support Structures ◽  
Design Processes ◽  
Art Design

Strength Assessment of Jacket Offshore Wind Turbine Support Structure Accounting for Rupture1

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Baran Yeter ◽  
Yordan Garbatov ◽  
C. Guedes Soares
Keyword(s):  
Wind Turbine ◽  
Low Cycle Fatigue ◽  
High Stress ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Small Scale ◽  
Support Structures ◽  
Support Structure ◽  
Strength Assessment ◽  
High Stress Concentration

The objective of the present work is to carry out the strength assessment of jacket offshore wind turbine support structures subjected to progressive rupture. A defect existing in a structure made during the fabrication may turn into a small-scale rupture and because of the high-stress concentration and low-cycle fatigue load. Therefore, the ultimate load-carrying capacity of the support structure is analyzed accounting for the progress of the rupture until the leg component experiences a full rupture along its circumference. The effect of imperfection severity is also investigated. The moment–curvature relationship of the structure concerning the studied cases is presented. Furthermore, the jacket support structures, at different water depths, are also analyzed and discussed. Finally, some of the leg components are removed one by one to study the redundancy of the jacket support structure at 80-m water depth.

Sign in / Sign up

Export Citation Format

Share Document