Decreased Light Transmittance Because of Aging and Melatonin

2011 ◽  
pp. 393-396
Keyword(s):  
Light Transmittance

Flocculation of Waste Waters from Petroleum Refineries

1974 ◽  
Vol 9 (1) ◽  
pp. 302-314
Author(s):  
André Hade ◽  
Acher Elcabetz
Keyword(s):  
Electrophoretic Mobility ◽  
Light Transmittance ◽  
Waste Waters ◽  
Critical Coagulation Concentration ◽  
Mobility Rate ◽  
Anionic Polymers ◽  
Petroleum Refineries ◽  
Binary Suspension

Abstract Waste waters from petroleum refineries can be considered as a ternary-like system, the components of which have been characterized. They are: the alkaline liquor, the hydrocarbon rich oil in suspension and the silica rich solid also in suspension. The parameters controlling the destabilization and the flocculation of these suspensions have been studied by light transmittance and electrophoretic mobility. Rate of flocculation, critical coagulation concentration (CCC) , critical restabilization concentration and optimum flocculation conditions have been determined for different combinations of added polyelectrolytes and/or simple electrolytes. Among eleven different polyelectrolytes, four of the cationic type were selected for their property to flocculate the suspension. It has been shown that an excess of polyelectrolyte brings about the restabilization of the particules. No flocculation has been observed for any of the anionic polymers tested. Simple electrolytes are found to obey the Schulze-Hardy rule in their flocculation capacity. Various combinations of a polyelectrolyte with a simple salt lead to a lower CCC together with a broader concentration range between destabilization and restabilization. It is concluded that this binary suspension behaved essentially like a classical lyophobic sol.

Imaging NMDA- and kainate-induced intrinsic optical signals from the hippocampal slice

1996 ◽  
Vol 76 (4) ◽  
pp. 2707-2717 ◽  
Author(s):  
R. D. Andrew ◽  
J. R. Adams ◽  
T. M. Polischuk
Keyword(s):  
Nmda Receptor ◽  
Receptor Antagonist ◽  
Ampa Receptors ◽  
Hippocampal Slice ◽  
Field Potential ◽  
Nmda Receptor Antagonist ◽  
Light Transmittance ◽  
Stratum Radiatum ◽  
Cell Swelling ◽  
Tissue Resistance

1. Brain ischemia causes excess release and accumulation of glutamate that binds to postsynaptic receptors. This opens ionotropic channels that mediate neuronal depolarization and ionic fluxes that can lead to neuronal death. 2. The CA1 pyramidal cell region of the hippocampus is particularly susceptible to this neurotoxic process. Brain cell swelling is considered an early excitotoxic event, but remains poorly under stood and documented. As cells swell, light transmittance (LT) increases through brain tissue, so we hypothesized that brief exposure to glutamate agonists would elicit cell swelling that could be imaged in real time in the hippocampal slice. 3. A 1-min bath application of 100 microM N-methyl-D-aspartate (NMDA) or 100 microM kainate at 22 degrees C greatly increased LT, particularly in the dendritic regions of CA1. The response peaked by 2-3 min and slowly reversed over the subsequent 20 min following exposure. Peak LT increases were > 50% in CA1 stratum radiatum and > 20% in both CA1 stratum oriens and the dendritic region of the dentate gyrus, all areas with a high concentration of NMDA and alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionate (AMPA) receptors. The CA3 stratum radiatum, which contains fewer of these receptors, showed a comparatively small LT increase. 4. The NMDA receptor antagonist 2-amino-5-phosphonovalerate (AP-5) [but not 6-cyano-7-nitroquinoxaline-2,3-dione (CNQX)] blocked the CA1 response to NMDA, whereas the non-NMDA receptor antagonist CNQX (but not AP-5) blocked the response to kainate. The relative tissue resistance measured across CA1 stratum radiatum increased after NMDA or kainate exposure with a time course similar to the LT change described above. The increase in relative tissue resistance was blocked by kynurenate, a nonspecific glutamate antagonist. Increases in both LT and tissue resistance provide two independent lines of evidence that cell swelling rapidly developed in CA1 dendritic areas after activation of NMDA or AMPA receptors. 5. This swelling at 22 degrees C was accompanied by a temporary loss of the evoked CA1 field potential. However, at 37 degrees C the dendritic swelling rapidly progressed to an irreversible LT increase (swelling) of the CA1 cell bodies accompanied by a permanent loss of the evoked field. 6. We propose that dendritic swelling mediated by NMDA and AMPA receptors is an early excitotoxic event that can herald permanent damage to CA1 neurons, those cells most vulnerable to ischemic insult.

An electrically light-transmittance-switchable film with a low driving voltage based on liquid crystal/polymer composites

2019 ◽  
Vol 47 (1) ◽  
pp. 106-113 ◽  
Author(s):  
Chunxin Li ◽  
Mei Chen ◽  
Lanying Zhang ◽  
Wenbo Shen ◽  
Xiao Liang ◽  
...  
Keyword(s):  
Liquid Crystal ◽  
Polymer Composites ◽  
Liquid Crystal Polymer ◽  
Light Transmittance ◽  
Driving Voltage ◽  
Crystal Polymer

scholarly journals Windblown Sand-Induced Degradation of Glass Panels in Curtain Walls

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 607
Author(s):  
Yuxi Zhao ◽  
Rongcheng Liu ◽  
Fan Yan ◽  
Dawei Zhang ◽  
Junjin Liu
Keyword(s):  
Visible Light ◽  
Mass Loss ◽  
Effective Area ◽  
Area Ratio ◽  
Light Transmittance ◽  
Relative Mass ◽  
Impact Time ◽  
Windblown Sand ◽  
Glass Panels ◽  
The Impact

The windblown sand-induced degradation of glass panels influences the serviceability and safety of these panels. In this study, the degradation of glass panels subject to windblown sand with different impact velocities and impact angles was studied based on a sandblasting test simulating a sandstorm. After the glass panels were degraded by windblown sand, the surface morphology of the damaged glass panels was observed using scanning electron microscopy, and three damage modes were found: a cutting mode, smash mode, and plastic deformation mode. The mass loss, visible light transmittance, and effective area ratio values of the glass samples were then measured to evaluate the effects of the windblown sand on the panels. The results indicate that, at high abrasive feed rates, the relative mass loss of the glass samples decreases initially and then remains steady with increases in impact time, whereas it increases first and then decreases with an increase in impact angle such as that for ductile materials. Both visible light transmittance and effective area ratio decrease with increases in the impact time and velocities. There exists a positive linear relationship between the visible light transmittance and effective area ratio.

scholarly journals Injection-rolling nozzle in an imprint system with continuous injection direct rolling for ultra-thin microstructure guide light plate

2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110112
Author(s):  
Yan Lou ◽  
Kewei Chen ◽  
Xiangwei Zhou ◽  
Yanfeng Feng
Keyword(s):  
Flow Velocity ◽  
Superior Performance ◽  
Light Transmittance ◽  
Velocity Difference ◽  
Orthogonal Experiments ◽  
Width Direction ◽  
Direct Rolling ◽  
Simulation Results ◽  
Continuous Injection ◽  
Better Than

A novel Injection-rolling Nozzle (IRN) in an imprint system with continuous injection direct rolling (CIDR) for ultra-thin microstructure polymer guide light plates was developed to achieve uniform flow velocity and temperature at the width direction of the cavity exit. A novel IRN cavity was designed. There are eight of feature parameters of cavity were optimized by orthogonal experiments and numerical simulation. Results show that the flow velocity at the width direction of the IRN outlet can reach uniformity, which is far better than that of traditional cavity. The smallest flow velocity difference and temperature difference was 0.6 mm/s and 0.24 K, respectively. The superior performance of the IRN was verified through a CIDR experiment. Several 0.35-mm thick, 340-mm wide, and 10-m long microstructural Polymethyl Methacrylate (PMMA) guide light plates were manufactured. The average filling rates of the microgrooves with the aspect ratio 1:3 reached above 93%. The average light transmittance is 88%.

scholarly journals Physicochemical and Microstructural Characterization of Whey Protein Films Formed with Oxidized Ferulic/Tannic Acids

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1599
Author(s):  
Yaosong Wang ◽  
Youling L. Xiong
Keyword(s):  
Whey Protein ◽  
Microstructural Characterization ◽  
Protein Isolate ◽  
Light Transmittance ◽  
In Vitro Digestibility ◽  
Protein Films ◽  
Film Forming ◽  
Protein Sulfhydryl ◽  
Reduced Light

Protein-based biodegradable packaging films are of environmental significance. The effect of oxidized ferulic acid (OFA)/tannic acid (OTA) on the crosslinking and film-forming properties of whey protein isolate (WPI) was investigated. Both of the oxidized acids induced protein oxidation and promoted WPI crosslinking through the actions of quinone carbonyl and protein sulfhydryl, and amino groups. OTA enhanced the tensile strength (from 4.5 MPa to max 6.7 MPa) and stiffness (from 215 MPa to max 376 MPa) of the WPI film, whereas OFA significantly increased the elongation at break. The water absorption capability and heat resistance of the films were greatly improved by the addition of OTA. Due to the original color of OTA, the incorporation of OTA significantly reduced light transmittance of the WPI film (λ 200–600 nm) as well as the transparency, whereas no significant changes were induced by the OFA treatment. Higher concentrations of OTA reduced the in vitro digestibility of the WPI film, while the addition of OFA had no significant effect. Overall, these two oxidized polyphenols promoted the crosslinking of WPI and modified the film properties, with OTA showing an overall stronger efficacy than OFA due to more functional groups available.

scholarly journals High-Efficiency Responsive Smart Windows Fabricated by Carbon Nanotubes Modified by Liquid Crystalline Polymers

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 440
Author(s):  
Yuan Deng ◽  
Shi-Qin Li ◽  
Qian Yang ◽  
Zhi-Wang Luo ◽  
He-Lou Xie
Keyword(s):  
Carbon Nanotubes ◽  
Liquid Crystalline ◽  
Near Infrared ◽  
High Efficiency ◽  
Polymer Brush ◽  
Light Transmittance ◽  
Smart Window ◽  
Vertical Orientation ◽  
Smart Windows ◽  
Conversion Materials

Smart windows can dynamically and adaptively adjust the light transmittance in non-energy or low-energy ways to maintain a comfortable ambient temperature, which are conducive to efficient use of energy. This work proposes a liquid crystal (LC) smart window with highly efficient near-infrared (NIR) response using carbon nanotubes grafted by biphenyl LC polymer brush (CNT-PDB) as the orientation layer. The resultant CNT-PDB polymer brush can provide the vertical orientation of LC molecules to maintain the initial transparency. At the same time, the smart window shows a rapid response to NIR light, which can quickly adjust the light transmittance to prevent sunlight from entering the room. Different from common doping systems, this method avoids the problem of poor compatibility between the LC host and photothermal conversion materials, which is beneficial for improving the durability of the device.

scholarly journals A Fundamental Study on the Development of New Energy Performance Index in Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2064
Author(s):  
Jin-Hee Kim ◽  
Seong-Koo Son ◽  
Gyeong-Seok Choi ◽  
Young-Tag Kim ◽  
Sung-Bum Kim ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Requirement ◽  
Energy Performance ◽  
Office Buildings ◽  
Light Transmittance ◽  
Wall Structure ◽  
Fundamental Study ◽  
Future Studies ◽  
U Value ◽  
The Impact

Recently, there have been significant concerns regarding excessive energy use in office buildings with a large window-to-wall ratio (WWR) because of the curtain wall structure. However, prior research has confirmed that the impact of the window area on energy consumption varies depending on building size. A newly proposed window-to-floor ratio (WFR) correlates better with energy consumption in the building. In this paper, we derived the correlation by analyzing a simulation using EnergyPlus, and the results are as follows. In the case of small buildings, the results of this study showed that the WWR and energy requirement increase proportionally, and the smaller the size is, the higher the energy sensitivity will be. However, results also confirmed that this correlation was not established for buildings approximately 3600 m2 or larger. Nevertheless, from analyzing the correlation between the WFR and the energy requirements, it could be deduced that energy required increased proportionally when the WFR was 0.1 or higher. On the other hand, the correlation between WWR, U-value, solar heat gain coefficient (SHGC), and material property values of windows had little effect on energy when the WWR was 20%, and the highest effect was seen at a WWR of 100%. Further, with an SHGC below 0.3, the energy requirement decreased with an increasing WWR, regardless of U-value. In addition, we confirmed the need for in-depth research on the impact of the windows’ U-value, SHGC, and WWR, and this will be verified through future studies. In future studies on window performance, U-value, SHGC, visible light transmittance (VLT), wall U-value as sensitivity variables, and correlation between WFR and building size will be examined.

DSSC-Integrated Glassblocks for the Construction of Sustainable Building Envelopes

2014 ◽  
Vol 875-877 ◽  
pp. 629-634 ◽  
Author(s):  
Rossella Corrao ◽  
Dario D'Anna ◽  
Marco Morini ◽  
Luisa Pastore
Keyword(s):  
Energy Efficient ◽  
Light Transmittance ◽  
Building Envelopes ◽  
Sustainable Building ◽  
Building Product ◽  
Building Integrated Photovoltaics ◽  
Pv Systems ◽  
Innovative Solutions ◽  
First Results ◽  
The University

The paper shows the first results of the optical performance analysis carried out on the DSSC integrated glassblock, an innovative building product developed at the Department of Architecture of the University of Palermo. In the field of a research that is being conducted in order to define innovative solutions for the construction of photovoltaic and energy efficient translucent building envelopes, different hypotheses of integration of DSSC into the glassblock have been foreseen. The integration of glassblock with third generation PV systems allows to define a novel building-PV product that meets the current requirements of the BIPV (Building Integrated Photovoltaics) market. By means of OptiCAD® software, several numerical simulations were conducted to analyse the solar factor, the light transmittance and the shading coefficient of the device.

Sign in / Sign up

Export Citation Format

Share Document