Fatigue testing of subsea pipeline steel connections under combined actions

2010 ◽  
pp. 649-654 ◽  
Author(s):  
H Liu ◽  
X Zhao ◽  
Z Xiao
Keyword(s):  
Fatigue Testing ◽  
Pipeline Steel ◽  
Subsea Pipeline ◽  
Steel Connections ◽  
Combined Actions

Fatigue of Unidirectional Cord-Rubber Composites

1999 ◽  
Vol 27 (1) ◽  
pp. 48-57 ◽  
Author(s):  
Y. Liu ◽  
Z. Wan ◽  
Z. Tian ◽  
X. Du ◽  
J. Jiang ◽  
...  
Keyword(s):  
Damage Accumulation ◽  
Fatigue Testing ◽  
Fatigue Behavior ◽  
Constant Load ◽  
Testing System ◽  
Rubber Composites ◽  
Cycle Frequency ◽  
Periodic Loading ◽  
Fatigue Damage Accumulation ◽  
Rubber Composite

Abstract A fatigue testing system is established with which the real-time recording of stress, strain, temperature, and hysteresis loss of rubbers or cord-rubber composite specimens subjected to periodic loading or extension can be successfully carried out. Several problems are connected with the experimental study of the fatigue of rubber composites. In constant extension cycling, the specimen becomes relaxed because of the viscoelasticity of rubber composites, and the imposed tension-tension deformation becomes complex. In this method, the specimen is unlikely to fail unless the imposed extensions are very large. Constant load cycling can avoid the shortcomings of constant extension cycling. The specially designed clamps ensure that the specimen does not slip when the load retains a constant value. The Deformation and fatigue damage accumulation processes of rubber composites under periodic loading are also examined. Obviously, the effect of cycle frequency on the fatigue life of rubber composites can not be ignored because of the viscoelasticity of constituent materials. The increase of specimen surface temperature is relatively small in the case of 1 Hz, but the temperature can easily reach 100°C at the 8 Hz frequency. A method for evaluating the fatigue behavior of tires is proposed.

On a New Rotating Bending Fatigue Testing Machine

1966 ◽  
Vol 15 (148) ◽  
pp. 49-54
Author(s):  
Minoru KAWAMOTO ◽  
Katsumi SUMIHIRO ◽  
Koji KIDA
Keyword(s):  
Fatigue Testing ◽  
Testing Machine ◽  
Bending Fatigue ◽  
Rotating Bending Fatigue ◽  
Rotating Bending

Modeling of an equipment for thermal fatigue testing

2017 ◽  
Author(s):  
Ayrton Brandim ◽  
Antônio Edson Rocha Filho ◽  
Flávio Alves dos Santos ◽  
José Oliveira Neto ◽  
Sérgio Alves da Silva
Keyword(s):  
Thermal Fatigue ◽  
Fatigue Testing

Inhibition of pipeline steel corrosion in acidic environment using sulphadoxine and pyrimethamine

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Inhibition Efficiency ◽  
Pipeline Steel ◽  
Electrochemical Techniques ◽  
Steel Corrosion ◽  
Acidic Environment ◽  
Inhibitor Concentration ◽  
Adsorption Data ◽  
Corrosion Inhibition Efficiency ◽  
Inhibitive Action ◽  
Sulphadoxine Pyrimethamine

The anti-corrosive properties of sulphadoxine + pyrimethamine (S+P) on the corrosion of pipeline steel in acidic environment were investigated using electrochemical techniques. The results obtained showed an excellent inhibition efficiency which increased with increase in inhibitor concentration. The corrosion inhibition efficiency increased up to 99.04 % at 0.01M S+P and decreased with rise in temperature down to 85.93 % at 333 K and 0.01 M S+P, suggesting a physiosorptive mechanism of adsorption. Also the adsorption data was fitted into Langmuir and Temkin adsorption isotherms, while the inhibitive action was shown to proceed by mixed inhibition mode.

Sign in / Sign up

Export Citation Format

Share Document