Effects of inclined piles on the seismic performances of pile groups

The results of five centrifuge models were used to evaluate the response of pile-supported wharves subjected to inertial and liquefaction-induced lateral spreading loads. The centrifuge models contained pile groups that were embedded in rockfill dikes over layers of loose to dense sand and were shaken by a series of ground motions. The p-y curves were back-calculated for both dynamic and static loading from centrifuge data and were compared against commonly used American Petroleum Institute p-y relationships. It was found that liquefaction in loose sand resulted in a significant reduction in ultimate soil resistance. It was also found that incorporating p-multipliers that are proportional to the pore water pressure ratio in granular materials is adequate for estimating pile demands in pseudo-static analysis. The unique contribution of this study is that the piles in these tests were subjected to combined effects of inertial loads from the superstructure and kinematic loads from liquefaction-induced lateral spreading.

Download Full-text

CYCLIC LATERAL RESPONSE OF MODEL PILE GROUPS FOR WIND TURBINES IN CLAY SOIL

International Journal of Geomate ◽

10.21660/2017.32.6613 ◽

2017 ◽

Author(s):

Werasak Raongjant

Keyword(s):

Wind Turbines ◽

Clay Soil ◽

Pile Groups ◽

Lateral Response ◽

Model Pile

Download Full-text

Development of Simulation Based p-Multipliers for Laterally Loaded Pile Groups in Granular Soil Using 3D Nonlinear Finite Element Model

Applied Sciences ◽

10.3390/app11010026 ◽

2020 ◽

Vol 11 (1) ◽

pp. 26

Author(s):

Muhammad Bilal Adeel ◽

Muhammad Asad Jan ◽

Muhammad Aaqib ◽

Duhee Park

Keyword(s):

Finite Element ◽

Element Model ◽

Design Guidelines ◽

American Petroleum Institute ◽

Winkler Foundation ◽

Group Effect ◽

Pile Groups ◽

Element Analysis ◽

Laterally Loaded Pile ◽

Laterally Loaded

The behavior of laterally loaded pile groups is usually accessed by beam-on-nonlinear-Winkler-foundation (BNWF) approach employing various forms of empirically derived p-y curves and p-multipliers. Averaged p-multiplier for a particular pile group is termed as the group effect parameter. In practice, the p-y curve presented by the American Petroleum Institute (API) is most often utilized for piles in granular soils, although its shortcomings are recognized. In this study, we performed 3D finite element analysis to develop p-multipliers and group effect parameters for 3 × 3 to 5 × 5 vertically squared pile groups. The effect of the ratio of spacing to pile diameter (S/D), number of group piles, varying friction angle (φ), and pile fixity conditions on p-multipliers and group effect parameters are evaluated and quantified. Based on the simulation outcomes, a new functional form to calculate p-multipliers is proposed for pile groups. Extensive comparisons with the experimental measurements reveal that the calculated p-multipliers and group effect parameters are within the recorded range. Comparisons with two design guidelines which do not account for the pile fixity condition demonstrate that they overestimate the p-multipliers for fixed-head condition.

Download Full-text