scholarly journals Effect of Industrial Impregnation Process on the Magnetic Properties of Electrical Steels

2021 ◽  
pp. 167942
Author(s):  
H. Helbling ◽  
A. Benabou ◽  
A. Van Gorp ◽  
A. Tounzi ◽  
M. El Youssef ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Electrical Steels ◽  
Impregnation Process

scholarly journals Functional Modification of Cellulose Acetate Microfiltration Membranes by Supercritical Solvent Impregnation

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 411
Author(s):  
Irena Zizovic ◽  
Marcin Tyrka ◽  
Konrad Matyja ◽  
Ivana Moric ◽  
Lidija Senerovic ◽  
...  
Keyword(s):  
Cellulose Acetate ◽  
Ion Beam ◽  
Antibacterial Properties ◽  
Cross Flow ◽  
Batch Mode ◽  
Impregnation Process ◽  
Supercritical Solvent ◽  
Cross Flow Filtration ◽  
Microfiltration Membranes ◽  
The Impact

This study investigates the modification of commercial cellulose acetate microfiltration membranes by supercritical solvent impregnation with thymol to provide them with antibacterial properties. The impregnation process was conducted in a batch mode, and the effect of pressure and processing time on thymol loading was followed. The impact of the modification on the membrane’s microstructure was analyzed using scanning electron and ion-beam microscopy, and membranes’ functionality was tested in a cross-flow filtration system. The antibiofilm properties of the obtained materials were studied against Staphyloccocus aureus and Pseudomonas aeruginosa, while membranes’ blocking in contact with bacteria was examined for S. aureus and Escherichia coli. The results revealed a fast impregnation process with high thymol loadings achievable after just 0.5 h at 15 MPa and 20 MPa. The presence of 20% of thymol provided strong antibiofilm properties against the tested strains without affecting the membrane’s functionality. The study showed that these strong antibacterial properties could be implemented to the commercial membranes’ defined polymeric structure in a short and environmentally friendly process.

On preform impregnation process simulation while transfer molding of composite products

2020 ◽  
Vol 27 (1) ◽  
pp. 233-245
Author(s):  
Nikolay Bodunov ◽  
Valentin Khaliulin ◽  
Igor Sidorov ◽  
Vladimir Kostin
Keyword(s):  
Process Simulation ◽  
Impregnation Process ◽  
Transfer Molding

Kinetics of the wood impregnation process. Modeling and experiment

1999 ◽  
Vol 72 (4) ◽  
pp. 590-598 ◽  
Author(s):  
M. A. Brich ◽  
V. P. Kozhin ◽  
V. K. Shchitnikov
Keyword(s):  
Process Modeling ◽  
Impregnation Process ◽  
Wood Impregnation ◽  
Kinetics Of

Interaction of elements in carbon-graphite—Al—Mg—Zn—Cu melt system under combined action of temperature and pressure

2021 ◽  
pp. 514-518
Author(s):  
N.Yu. Miroshkin ◽  
V.A. Gulevsky ◽  
S.N. Tsurikhin ◽  
A.I. Bogdanov ◽  
L.M. Gurevich ◽  
...  
Keyword(s):  
Matrix Alloy ◽  
Impregnation Process ◽  
Active Elements ◽  
Cu Alloy ◽  
Inner Surface ◽  
The Matrix ◽  
Combined Action ◽  
Temperature And Pressure ◽  
The Difference ◽  
Titanium Compounds

Redistribution of chemically active elements is established on its inner surface of pores and at the interface with the alloy when impregnating carbon-graphite framework with Al—Mg—Zn—Cu alloy at temperature of 800 °C under pressure of up to 3 MPa. In this case, change in the solubility of melt elements in aluminum is possible as result of the combined action of temperature and pressure in the impregnation process, created due to the difference in the coefficients of thermal and thermal expansion of the matrix alloy, and the material of the impregnation device during impregnation. Titanium compounds are found in the pores filled with metal that are not added to the matrix alloy, but are formed as result of the contact of the matrix alloy melt with the walls of the impregnation device.

Anisotropic Microstructure of Plasma-Sprayed Deposits

1998 ◽  
Author(s):  
J. lavsky ◽  
G.G. Long ◽  
A.J. Allen ◽  
L. Leblanc ◽  
M. Prystay ◽  
...  
Keyword(s):  
Small Angle Neutron Scattering ◽  
Size Range ◽  
Measurement Techniques ◽  
Quantitative Information ◽  
Underlying Structure ◽  
Impregnation Process ◽  
Direct Technique ◽  
Plasma Sprayed ◽  
The Relationship ◽  
Different Parts

Abstract The microstructure of plasma-sprayed deposits (PSD) is dominated by two void systems - interlamellar pores and intralamellar cracks - each with a different anisotropy. Varying anisotropics and crack-to-pore ratios within PSDs are responsible for the anisotropic properties observed in the deposits. While it is difficult to apply standard porosity measurement techniques to the assessment of anisotropic microstructures, novel techniques utilizing different approaches have recently emerged. Image analysis (IA) of impregnated PSD samples is the most direct technique. The structure is stabilized by impregnation and then polished and imaged. The limitations of IA lie in the impregnation process and in the subsequent polishing. Also, the images produced from anisotropic materials can be difficult to interpret quantitatively. The technique of small-angle neutron scattering (SANS) has recently been successfully applied to the study of PSDs. The major advantages of SANS are that it does not require sample preparation and that quantitative information can be gotten about the separate crack and pore systems, including their distinctive anisotropics. However, the relationship between the SANS results and the underlying structure is more complex and less intuitive than for IA, and the availability of the SANS technique is limited by the need to have access to a powerful neutron source, such as a reactor. Also, the two techniques present different views of the microstructure because of the different sensitivities in different parts of the size range. This paper compares results from IA and SANS from a set of thick plasma-sprayed ceramic deposits possessing a range of crack/pore microstructures, and discusses how the two techniques might complement one another.

Sign in / Sign up

Export Citation Format

Share Document