scholarly journals PROCESS CAPABILITY ANALYSIS PADA NUT (STUDI KASUS: PT SANKEI DHARMA INDONESIA)

2017 ◽  
Vol 12 (2) ◽  
pp. 137
Author(s):  
Helena Sisilia R. S. ◽  
Hendy Tannady
Keyword(s):  
Process Control ◽  
Statistical Process Control ◽  
Process Capability ◽  
Statistical Process ◽  
Process Capability Analysis ◽  
Capability Index ◽  
Inside Diameter ◽  
Capability Analysis ◽  
Improved Performance ◽  
A Company

PT Sankei Dharma Indonesia merupakan perusahaan yang bergerak di bidang otomotif. Salah satu produk yang dihasilkan adalah nut (berfungsi sebagai dudukan kabel sensor). Proses nut dianggap critical to quality, dimana hasil dari proses memperhatikan inside diameter nut yang dihasilkan PT A, PT B, dan PT C. Peningkatan kinerja proses dilakukan dengan menggunakan process capability yang merupakan salah metode dari Statistical Process Control. Hasil dari penelitian menunjukkan bahwa process capability pada inside diameter PT B berjalan dengan tidak sesuai, di mana nilai capability index Cp = 0.57, Cpl = 0.58, Cpu = 0.56, Cpk = 0.56, dan Cpm = 0.54. Sedangkan process capability pada inside diameter PT A dan PT C tergolong sangat memuaskan. Di mana nilai capability index PT C Cp = 2.34, Cpl = 2.37, Cpu = 2.30, Cpk = 2.30, dan Cpm = 2.26. Dan nilai capability index PT A Cp = 1.77, Cpl = 1.79, Cpu = 1.75, Cpk = 1.75, dan Cpm = 1.86. AbstractPT Sankei Dharma Indonesia is a company engaged in the automotive field. One of the resulting product is a nut (functioning as a sensor cable holder). Nut process is considered critical to quality, which result from the attention generated inside diameter nut PT A, PT B, dan PT C. Improved performance of process is done by using process capability, which is one method of Statistical Process Control. Results from the study showed that the process capability to the inside diameter of the PT B running is not appropriate, in which the value of capability index Cp = 0,57; Cpl = 0,58; Cpu = 0,56; Cpk = 0,56, dan Cpm = 0,54; While the process capability to inside diameter PT A and PT C as very satisfactory. Where the value of capability index PT C Cp = 2.34, Cpl = 2.37, Cpu = 2.30, Cpk = 2.30, dan Cpm = 2.26. And the value of capability index PT A Cp = 1.77, Cpl = 1.79, Cpu = 1.75, Cpk = 1.75, dan Cpm = 1.86.

The Application Research of Statistical Process Control in Quality Management

2014 ◽  
Vol 926-930 ◽  
pp. 4000-4003
Author(s):  
Qiu Yan Liu ◽  
Jun Li Shi ◽  
Shi Yuan Xing
Keyword(s):  
Quality Management ◽  
Process Control ◽  
Statistical Process Control ◽  
Control Chart ◽  
Process Capability ◽  
Control Technology ◽  
Application Research ◽  
Statistical Process ◽  
Intensity Index ◽  
Productive Process

By discussing the application of statistical process control technology in the print and package industry, we have been in control of the productive process, for focusing on the heat-seal intensity index of sauce package products, and utilized instability of the control chart discovering the instable in the process , to realize the pre-alarm function. The management makes the process update constantly, and enhances the process capability.

scholarly journals Aplikasi Statistik Proses Kontrol Untuk Evaluasi Proses Pembelajaran Menggunakan Diagram Kontrol X ̅ dan R

2019 ◽  
Vol 12 (2) ◽  
pp. 30-35
Author(s):  
Zurqoni ◽  
Fathur Rahman
Keyword(s):  
Process Control ◽  
Student Performance ◽  
Learning Process ◽  
Teaching And Learning ◽  
Student Evaluation ◽  
Control Process ◽  
Process Capability ◽  
Evaluation Process ◽  
Control Program ◽  
Student Grades

he use of Statistics Process Control in education is fairly new but it has been clearly seen that the method can be used in the field of student evaluation in teaching and learning processes, monitoring student grades, assessment processes in higher education, assessment of learning outcomes and others. This study will discuss the application of Process Control Statistics (SPK) to evaluate the learning process using two control diagrams of variables  and R using the Process Capability (KP) analysis, which aims to determine students' abilities in carrying out practical tests. From these problems to determine the effectiveness of the control program  and R in evaluating the learning process. From the results of the analysis it can be concluded that the application of Control Process Statistics is very possible in the evaluation of the learning process. In this context, control diagrams  and R are useful for increasing efficiency in detecting deficiencies in the evaluation of the learning process and evaluating student performance. In the process capability analysis (KP) it can be seen that the student evaluation process is still not as expected, and the learning process is considered to be uneven so that the resulting output has not reached what was expected Penggunaan Statistik Proses Kontrol dalam pendidikan memang terbilang baru tetapi  telah jelas terlihat bahwa metode tersebut dapat digunakan di bidang evaluasi siswa dalam pengajaran dan proses pembelajaran, pemantauan nilai siswa, proses penilaian dalam pendidikan tinggi, penilaian hasil pembelajaran dan lain-lain. Penelitian ini akan membahas penerapan Statistik Proses Kontrol (SPK) untuk mengevaluasi proses pembelajaran menggunakan dua digram kontrol variabel  dan R dengan menggunakan analisis Kapabilitas Proses (KP), yang bertujuan untuk mengetahui kemampuan siswa dalam melaksanakan ujian praktikum.  Dari permasalahan tersebut untuk mengetahui efektifitas digram kontrol  dan R dalam mengevaluasi proses pembelajaran.  Dari hasil analisis dapat disimpulkan bahwa penerapan Statistik Proses Kontrol sangat mungkin dilakukan dalam evaluasi proses pembelajaran. Dalam konteks ini, diagram kontrol  dan R  berguna untuk meningkatkan efisiensi dalam mendeteksi kekurangan dalam evaluasi proses pembelajaran dan evaluasi kinerja siswa. Pada analisis kapabilitas proses (KP) dapat diketahui bahwa proses evaluasi siswa masih belum sesuai dengan yang diharapkan, dan proses pembelajaran dianggap belum merata sehingga ouput yang dihasilkan belum mencapai dengan yang diharapkan.    

scholarly journals Implementation of Statistical Process Control through PDCA Cycle to Improve Potential Capability Index of Drop Impact Resistance: A Case Study at Aluminum Beverage and Beer Cans Manufacturing Industry in Indonesia

2020 ◽  
Vol 24 (1) ◽  
pp. 104 ◽  
Author(s):  
Sunadi Sunadi ◽  
Humiras Hardi Purba ◽  
Sawarni Hasibuan
Keyword(s):  
Process Control ◽  
Statistical Process Control ◽  
Manufacturing Industry ◽  
Impact Resistance ◽  
Process Capability ◽  
Drop Impact ◽  
Nominal Group ◽  
Statistical Process ◽  
Capability Index ◽  
Pdca Cycle

<p><strong>Purpose:</strong> The purposes of this study are first, to analyze why the <em>process capability index </em>(<em>Cpk</em>) for drop impact resistance (DIR) does not meet the specification or less than 1.33, and second, to find out what improvements should be made to make it meet the specification.</p><p><strong>Methodology/Approach:</strong> The methodology used was Statistical Process Control (SPC) through the PDCA cycle, supporting with Cause and Effect Diagram (CED), Nominal Group Technique (NGT) and “why, what, where, when and how (5W1H)” method.</p><p><strong>Findings:</strong> With the above methods, the result of the study was given a positive impact on the company. The average of DIR was increased from 20.40 cm to 25.76 cm, increased by 26.27% and the standard deviation was reduced from 1.80 to 1.48, and then the<em> Cpk</em> index was increased from 0.48 to 1.79 it means the process is in control and capable.</p><p><strong>Research Limitation/implication:</strong> This research was limited only on the two-piece can aluminum cans manufacturing process, no for three-piece cans manufacturing. SPC through PDCA cycle is an interesting method for continuous improvement of process capability in the cans manufacturing industry.</p><strong>Originality/Value of paper:</strong> This study highlights the area of future research SPC through the PDCA cycle to analyze and optimize process capability. Therefore, this research is considered to promote and adopt high-valued methodologies for supporting industry to achieve global competitive advantages.

Retrospective analysis for phase I statistical process control and process capability study using revised sample entropy

2018 ◽  
Vol 31 (11) ◽  
pp. 7415-7428 ◽  
Author(s):  
Shing I. Chang ◽  
Zheng Zhang ◽  
Siim Koppel ◽  
Behnam Malmir ◽  
Xianguang Kong ◽  
...  
Keyword(s):  
Process Control ◽  
Phase I ◽  
Retrospective Analysis ◽  
Statistical Process Control ◽  
Process Capability ◽  
Sample Entropy ◽  
Statistical Process

Application of Statistical Process Control Tools to Improve Product Quality in Manufacturing Processes

2011 ◽  
Vol 110-116 ◽  
pp. 4023-4027
Author(s):  
Omar Bataineh ◽  
Abdullah Al-Dwairi
Keyword(s):  
Quality Control ◽  
Process Control ◽  
Statistical Process Control ◽  
Control Charts ◽  
Process Capability ◽  
Manufacturing Processes ◽  
Statistical Process ◽  
Free Products ◽  
Drug Companies

Quality control and improvement at the process level is a vital activity for the achievement of defect-free products in various manufacturing processes. This study employs statistical process control (SPC) tools such as control charts and process capability ratio for quality control and improvement. The control charts employed are , R and the cumulative-sum (CUSUM). The process capability ratio used is the so called process capability index (PCI). These tools have been implemented with the aid of Minitab® statistical software. In this study, the manufacturing process of gelatin capsules is investigated in terms of quality of the capsules, which are produced and shipped for use by various drug companies. As a result of implementation of SPC tools, an expected reduction in the number of defective capsules by 29% relative to the stage before implementation was achieved.

Sign in / Sign up

Export Citation Format

Share Document