scholarly journals Site Effects in Structural Response Predictions of Inelastic SDOF Oscillators

2012 ◽  
Vol 28 (3) ◽  
pp. 859-883 ◽  
Author(s):  
Dominic Assimaki ◽  
Wei Li ◽  
Michalis Fragiadakis
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Structural Response ◽  
Attenuation Relations ◽  
Period Range ◽  
Response Models ◽  
Linear Elastic ◽  
Ground Motion Variability ◽  
Inelastic Displacement Ratio ◽  
Input Motion

We study how the inelastic structural response predicted via synthetic seismograms is affected by the selection of site response models in ground motion simulations. We first generate synthetics for multiple scenarios and site conditions in Southern California using attenuation relations, site specific linear, vis-coelastic and nonlinear analyses, and estimate the ground motion variability that results from the soil model selection. We next use bilinear single degree-of-freedom oscillators to demonstrate how this variability propagates to the inelastic structural response predictions. Results show high bias and scatter of the inelastic displacement ratio predicted using the empirical and linear elastic site response models relative to the nonlinear, for periods close to the fundamental period of the site. For the synthetic motions and sites used, we derive empirical correlations between the amount of bias and period range where it manifests, and selected input motion and site parameters.

Hard as a rock? Looking for typical and atypical reference sites in the Greek network

2021 ◽  
Author(s):  
Olga-Joan Ktenidou ◽  
Faidra Gkika ◽  
Erion-Vasilis Pikoulis ◽  
Christos Evangelidis
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Time Budget ◽  
Strong Motion ◽  
General Rule ◽  
Spectral Ratio ◽  
Reference Sites ◽  
Motion Models ◽  
Ground Motion Variability

<p>Although it is nowadays desirable and even typical to characterise site conditions in detail at modern recording stations, this is not yet a general rule in Greece, due to the large number and geographical dispersion of stations. Indeed, most of them are still characterised merely through geological descriptions or proxy-based parameters, rather than through in-situ measurements. Considering: 1. the progress made in recent years with sophisticated ground motion models and the need to define region-specific rock conditions based on data, 2. the move towards large open-access strong-motion databases that require detailed site metadata, and 3. that Greek-provenance recordings represent a significant portion of European seismic data, there are many reasons to improve our understanding of site response at these stations. Moreover, it has been shown recently in several regions that even sites considered as rock can exhibit amplification and ground motion variability, which has given rise to more scientific research into the definition of reference sites. For Greece, in-situ-characterisation campaigns for the entire network would impose unattainable time/budget constraints; so, instead, we implement alternative empirical approaches using the recordings themselves, such as the horizontal-to-vertical spectral ratio technique and its variability. We present examples of 'well-behaved', typical rock sites, and others whose response diverges from what is assumed for their class.</p><p> </p>

Taiwan-Specific Model for VS30 Prediction Considering Between-Proxy Correlations

2018 ◽  
Vol 34 (4) ◽  
pp. 1973-1993 ◽  
Author(s):  
On Lei Annie Kwok ◽  
Jonathan P. Stewart ◽  
Dong Youp Kwak ◽  
Pang-Li Sun
Keyword(s):  
Ground Motion ◽  
Prediction Models ◽  
Site Response ◽  
Specific Model ◽  
Weighted Mean ◽  
Response Models ◽  
Database File ◽  
A Site ◽  
Gradient Effects ◽  
Model Weighting

Ergodic site response models are generally conditional on the time-averaged shear wave velocity in the upper 30 m ( V S30). Ground motion databases contain many recordings from Taiwan, and because of site characterization efforts, 56% of recording sites have V S30 derived from measurements. We develop proxy-based V S30 prediction models, one application of which is for the remaining 44% of Taiwan sites. Our approach, which can be suitable for other regions, differs from previous studies in which proxies are based on detailed geologic categories and possible within-category topographic gradient effects. Instead, we use three broad, age-based geologic categories, and for the youngest category of Holocene and Quaternary undivided sediments, we propose models conditioned on gradient and elevation. We also adapt a geomorphic terrain-based method, thus providing two V S30-prediction models. We describe a model weighting scheme that combines the models in consideration of their relative dispersions and correlation, producing a weighted mean and standard deviation natural-log V S30. Included as an electronic supplement is a profile database file and a site database with site parameters for Taiwan ground motion stations.

Seismic Wave Propagation and Basin Amplification in the Wasatch Front, Utah

2021 ◽  
Author(s):  
Morgan P. Moschetti ◽  
David Churchwell ◽  
Eric M. Thompson ◽  
John M. Rekoske ◽  
Emily Wolin ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Ground Motion ◽  
Seismic Wave ◽  
Seismic Velocity ◽  
Site Response ◽  
Ground Motions ◽  
Seismic Wave Propagation ◽  
Velocity Models ◽  
Ground Motion Variability ◽  
Wasatch Front

Abstract Ground-motion analysis of more than 3000 records from 59 earthquakes, including records from the March 2020 Mw 5.7 Magna earthquake sequence, was carried out to investigate site response and basin amplification in the Wasatch Front, Utah. We compare ground motions with the Bayless and Abrahamson (2019; hereafter, BA18) ground-motion model (GMM) for Fourier amplitude spectra, which was developed on crustal earthquake records from California and other tectonically active regions. The Wasatch Front records show a significantly different near-source rate of distance attenuation than the BA18 model, which we attribute to differences in (apparent) geometric attenuation. Near-source residuals show a period dependence of this effect, with greater attenuation at shorter periods (T<0.5  s) and a correlation between period and the distance over which the discrepancy manifests (∼20–50  km). We adjusted the recorded ground motions for these regional path effects and solved for station site terms using linear mixed-effects regressions, with groupings for events and stations. We analyzed basin amplification by comparing the site terms with the basin geometry and basin depths from two seismic-velocity models for the region. Sites over the deeper parts of the sedimentary basins are amplified by factors of 3–10, relative to sites with thin sedimentary cover, with greater amplification at longer periods (T≳1  s). Average ground-motion variability increases with period, and long-period variability exhibits a slight increase at the basin edges. These results indicate regional seismic wave propagation effects requiring further study, and potentially a regionalized GMM, as well as highlight basin amplification complexities that may be incorporated into seismic hazard assessments.

Vector and Scalar IMs in Structural Response Estimation, Part II: Building Demand Assessment

2016 ◽  
Vol 32 (3) ◽  
pp. 1525-1543 ◽  
Author(s):  
Mohsen Kohrangi ◽  
Paolo Bazzurro ◽  
Dimitrios Vamvatsikos
Keyword(s):  
Ground Motion ◽  
Hazard Analysis ◽  
Three Dimensional ◽  
Structural Response ◽  
Response Assessment ◽  
Companion Paper ◽  
Period Range ◽  
Intensity Measures ◽  
Advantages And Disadvantages ◽  
Story Drift

The advantages and disadvantages of using scalar and vector ground motion intensity measures (IMs) are discussed for the local, story-level seismic response assessment of three-dimensional (3-D) buildings. Candidate IMs are spectral accelerations, at a single period ( Sa) or averaged over a period range ( Sa avg). Consistent scalar and vector probabilistic seismic hazard analysis results were derived for each IM, as described in the companion paper in this issue ( Kohrangi et al. 2016 ). The response hazard curves were computed for three buildings with reinforced concrete infilled frames using the different IMs as predictors. Among the scalar IMs, Sa avg tends to be the best predictor of both floor accelerations and inter story drift ratios at practically any floor. However, there is an improvement in response estimation efficiency when employing vector IMs, specifically for 3-D buildings subjected to both horizontal components of ground motion. This improvement is shown to be most significant for a tall plan-asymmetric building.

scholarly journals Does the One-Dimensional Assumption Hold for Site Response Analysis? A Study of Seismic Site Responses and Implication for Ground Motion Assessment Using KiK-Net Strong-Motion Data

2019 ◽  
Vol 35 (2) ◽  
pp. 883-905 ◽  
Author(s):  
Marco Pilz ◽  
Fabrice Cotton
Keyword(s):  
Ground Motion ◽  
Site Effects ◽  
Site Response ◽  
Three Dimensional ◽  
Strong Motion ◽  
Site Response Analysis ◽  
Response Analysis ◽  
One Dimensional ◽  
Ground Motion Variability ◽  
The One

The one-dimensional (1-D) approach is still the dominant method to incorporate site effects in engineering applications. To bridge the 1-D to multidimensional site response analysis, we develop quantitative criteria and a reproducible method to identify KiK-net sites with significant deviations from 1-D behavior. We found that 158 out of 354 show two-dimensional (2-D) and three-dimensional (3-D) effects, extending the resonance toward shorter periods at which 2-D or 3-D site effects exceed those of the classic 1-D configurations and imposing an additional amplification to that caused by the impedance contrast alone. Such 2-D and 3-D effects go along with a large within-station ground motion variability. Remarkably, these effects are found to be more pronounced for small impedance contrasts. While it is hardly possible to identify common features in ground motion behavior for stations with similar topography typologies, it is not over-conservative to apply a safety factor to account for 2-D and 3-D site effects in ground motion modeling.

Numerical evaluation of the effect of cross-coupling of different components of ground motion in site response analyses

1999 ◽  
Vol 89 (4) ◽  
pp. 877-887
Author(s):  
Roberto Paolucci
Keyword(s):  
Transfer Function ◽  
Ground Motion ◽  
Site Response ◽  
Strong Motion ◽  
Cross Coupling ◽  
Response Functions ◽  
Spectral Ratios ◽  
Acceleration Time Histories ◽  
Time Histories ◽  
Input Motion

Abstract The effect of cross-coupling between the three components of ground motion in the evaluation of site-response functions, such as standard spectral ratios (SSRs) and horizontal-to-vertical spectral ratios (HVSRs), is analyzed in this article. Numerical analyses of the seismic response of fully 3D geological structures, namely, a real topographic irregularity and an ideal stratigraphic inclusion, have been carried out to obtain a 3D transfer function in the form of a 3 × 3 matrix. Each element of this matrix contains the frequency response in the ith direction due to an input motion in the jth direction. A synthetic set of acceleration time histories at the surface of the geological irregularity has been created by convolution with the 3D transfer function, using as input motion different real multicomponent strong-motion accelerograms recorded at stiff-soil or rock sites. The SSRs and HVSRs are calculated and compared with the theoretical 3D transfer function in order to highlight the effect of cross-coupling terms. These are found to generate a rather large dispersion in the site-response functions, as well as response peaks that could be misleading in the interpretation of both numerical and observed spectral ratios.

Sign in / Sign up

Export Citation Format

Share Document