Site Response Studies for Purpose of Revising NEHRP Seismic Provisions

1996 ◽  
Vol 12 (3) ◽  
pp. 407-439 ◽  
Author(s):  
C. B. Crouse ◽  
J. W. McGuire
Keyword(s):  
Earthquake Engineering ◽  
Site Response ◽  
Soft Soil ◽  
Strong Motion ◽  
Earthquake Hazard ◽  
Ground Acceleration ◽  
Amplification Factors ◽  
Soil Class ◽  
Engineering Research ◽  
Stiff Soil

A strong motion database was compiled for California earthquakes of surfacewave magnitudes, Ms ≥ 6, occurring from 1933 through 1992. The database consisted of horizontal peak ground acceleration and 5 percent damped response spectra of accelerograms recorded on four different local geologies: rock (class A), soft rock or stiff soil (class B), medium stiff soil (class C), and soft soil (class D). The results of analyses of the database within each of these site classes were used to derive a set of site-dependent spectral amplification factors for oscillator periods between 0.1 and 4.0 sec and ground acceleration levels between 0.1 and 0.4 g. The amplification factors at 0.3 and 1.0 sec periods (designated as Fa and Fv, respectively) are generally within 20 percent of those recommended during the 1992 Site Response Workshop conducted by the National Center for Earthquake Engineering Research (NCEER). The Fa and Fv values recommended from our study and those from the NCEER workshop are intended for use by code committees making future revisions to the National Earthquake Hazard Reduction Program (NEHRP) seismic provisions and the Uniform Building Code.

scholarly journals Earthquake record processing algorithms to form a strong motion database

2021 ◽  
Vol 2099 (1) ◽  
pp. 012060
Author(s):  
V A Mironov ◽  
S A Peretokin ◽  
K V Simonov
Keyword(s):  
Time Series ◽  
Earthquake Engineering ◽  
Strong Motion ◽  
Ground Acceleration ◽  
Engineering Research ◽  
The Pacific ◽  
Earthquake Record ◽  
Scientific Project ◽  
Attenuation Models ◽  
Strong Motion Database

Abstract This study is devoted to the development of algorithms and software for earthquake record processing. The algorithms are based on the methodology used by the Pacific Earthquake Engineering Research Center for the implementation of the scientific project NGA-West2. The purpose of processing is to determine reliable values of ground acceleration and other parameters of earthquakes from the available records of velocity time series. To analyze the operation of the algorithms, earthquake records (simultaneously recorded time series of acceleration and velocity) taken from the European Rapid Raw Strong-Motion database were used. The developed algorithms and the implemented software will allow in the future to form a database of strong motions for building regional attenuation models on the territory of the Russian Federation.

The site response of two rock and soil station pairs to strong and weak ground motion

1991 ◽  
Vol 81 (5) ◽  
pp. 1885-1899
Author(s):  
Robert B. Darragh ◽  
Anthony F. Shakal
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Soft Soil ◽  
Ground Acceleration ◽  
Ground Shaking ◽  
Soil Site ◽  
Rock Site ◽  
Loma Prieta ◽  
Strong Ground ◽  
Stiff Soil

Abstract The site response to strong and weak ground motion depends largely on the subsurface conditions at the soil site for the two rock-soil station pairs studied. The first station pair consists of a soft-soil site (Treasure Island) and a sandstone and shale site (Yerba Buena Island). These stations recorded strong ground shaking from the Loma Prieta mainshock and weak ground motion from four aftershocks. The range of peak ground acceleration is from approximately 0.00006 to 0.07 g at the rock site. Compared to the rock site, the strong ground motion at the soft-soil site is amplified by a factor of about 3 over a frequency range from 0.5 to 2.0 Hz. The amplification is much higher for weak motion and suggests a dependence on signal amplitude. For example, near 1 Hz, the site response shows an increasing amplification as magnitude (and the peak velocity at the rock site) decreases. For events of local magnitude 7.0, 4.3, 4.1, 3.5, and 3.3, the maximum soil-site amplifications are 4, 12, 17, 19, and 25, respectively. A second station pair consisting of a stiff-soil site (Gilroy #2) and a sandstone site (Gilroy #1) was also studied with contrasting results. These two stations recorded strong ground shaking from the 1979 Coyote Lake, 1984 Morgan Hill, and 1989 Loma Prieta mainshocks. Weak ground motion was recorded at these stations after the Loma Prieta mainshock. The range of peak ground acceleration is from 0.006 to 0.43 g at the rock site. Unlike the results for the soft-soil study above, the estimated stiff-soil site responses are not significantly different for strong and weak motion from 0.5 to 2.0 Hz. Near 0.7 Hz, the stiff-soil site responses range from 2.5 to 4.5 for strong ground shaking from three mainshocks and from 1.5 to 4.0 for weak ground shaking from thirteen aftershocks.

Nonlinear Site Effects from the 30 November 2018 Anchorage, Alaska, Earthquake

2021 ◽  
Author(s):  
John D. Thornley ◽  
Utpal Dutta ◽  
John Douglas ◽  
Zhaohui (Joey) Yang
Keyword(s):  
Site Response ◽  
Strong Motion ◽  
North American Plate ◽  
Peak Ground Velocity ◽  
Reference Station ◽  
Earthquake Hazards ◽  
Ground Acceleration ◽  
Nonlinear Site Response ◽  
Generalized Inversion Technique ◽  
Versus Peak

ABSTRACT Anchorage, Alaska, is a natural laboratory for recording strong ground motions from a variety of earthquake sources. The city is situated in a tectonic region that includes the interface and intraslab earthquakes related to the subducting Pacific plate and crustal earthquakes from the upper North American plate. The generalized inversion technique was used with a local rock reference station to develop site response at >20 strong-motion stations in Anchorage. A database of 94 events recorded at these sites from 2005 to 2019 was also compiled and processed to compare their site response with those in the 2018 Mw 7.1 event (main event). The database is divided into three datasets, including 75 events prior to the main event, the main event, and 19 aftershocks. The stations were subdivided into the site classes defined in the National Earthquake Hazards Reduction Program based on estimated average shear-wave velocity in of the upper 30 m (VS30), and site-response results from the datasets were compared. Nonlinear site response was observed at class D and DE sites (VS30 of 215–300 and 150–215  m/s, respectively) but not at class CD and C sites (VS30 of 300–440 and 440–640  m/s, respectively). The relationship of peak ground acceleration versus peak ground velocity divided by VS30 (shear-strain proxy) was shown to further support the observation that sites with lower VS30 experienced nonlinear site response.

The accuracy of soil response estimates using soil-to-rock spectral ratios

1996 ◽  
Vol 86 (2) ◽  
pp. 519-523
Author(s):  
Igor A. Beresnev ◽  
Kuo-Liang Wen
Keyword(s):  
Site Response ◽  
Soft Soil ◽  
Strong Motion ◽  
Finite Depth ◽  
Spectral Ratios ◽  
Site Specific ◽  
Soil Response ◽  
Strong Motion Records ◽  
The Real ◽  
Specific Amplification

Abstract Spectral ratios between soft soil and reference rock sites are often used to predict the sedimentary site response to earthquakes. However, their relationship with the genuine site-specific amplification function is often unclear. We compare the soil-to-rock spectral ratios between the stations that are 3.3 km apart with the “genuine” response given by the ratios between the surface and 17 and 47 m downhole. Data from the SMART1 array in Taiwan are used. The “weak” and “strong” motion records are addressed separately to allow for nonlinear soil response. The soil-to-rock spectral ratios are nearly identical to the “true” amplification at the frequencies from 1 to 10 Hz, if the finite depth of the borehole is taken into account. They correctly capture the strong-motion deamplification effect. However, the soil-to-rock spectral ratios are roughly 1.4 times more uncertain than surface-to-47-m ratios. In summary, the soil-to-rock spectral ratios can be considered as the reliable estimates of the real site response.

scholarly journals Design Earthquake Response Spectrum Affected by Shallow Soil Deposit

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Dong-Kwan Kim ◽  
Hong-Gun Park ◽  
Chang-Guk Sun
Keyword(s):  
Soil Depth ◽  
Site Response ◽  
Response Spectrum ◽  
Soft Soil ◽  
Response Spectra ◽  
Earthquake Response ◽  
Ground Acceleration ◽  
Site Class ◽  
Shallow Soil ◽  
Short Period

Site response analyses were performed to investigate the earthquake response of structures with shallow soil depth conditions in Korea. The analysis parameters included the properties of soft soil deposits at 487 sites, input earthquake accelerations, and peak ground-acceleration levels. The response spectra resulting from numerical analyses were compared with the design response spectra (DRS) specified in the 2015 International Building Code. The results showed that the earthquake motion of shallow soft soil was significantly different from that of deep soft soil, which was the basis of the IBC DRS. The responses of the structures were amplified when their dynamic periods were close to those of the site. In the case of sites with dynamic periods less than 0.4 s, the spectral accelerations of short-period structures were greater than those of the DRS corresponding to the site class specified in IBC 2015. On the basis of these results, a new form of DRS and soil factors are proposed.

Study on the Ground Response Analysis for Stiff Soil

2014 ◽  
Vol 915-916 ◽  
pp. 122-125
Author(s):  
Xiao Fei Li ◽  
Rui Sun ◽  
Xiao Bo Yu
Keyword(s):  
Seismic Response ◽  
Working Conditions ◽  
Strong Motion ◽  
Response Spectra ◽  
Response Analysis ◽  
Seismic Response Analysis ◽  
Ground Response Analysis ◽  
Ground Acceleration ◽  
Strong Motion Records ◽  
Stiff Soil

In order to test the applicable of the seismic response analysis procedures SHAKE2000 and LSSRLI-1 for class ІІ site, 17 stations and 35 underground strong motion records of KiK-net are selected from Class ІІ site. 210 working conditions are used to verify the applicability of the two soil seismic response analysis programs at Class ІІ site. These two programs are used to calculate the selected working conditions, giving the peak acceleration of the ground, the shear strain and the ground acceleration response spectra. By analyzing the results of the two programs and the measured results to assess the degree of difference between the two methods and which program is closer to the real situation. Studies have shown that in class ІІ site, in most cases, the results of SHAKE2000 and LSSRLI-1 differ little. While comparing with the actual records, SHAKE2000 is closer to the strong motion records.

Site Amplification at Permanent Stations in Northeastern Italy

2021 ◽  
Author(s):  
Peter Klin ◽  
Giovanna Laurenzano ◽  
Carla Barnaba ◽  
Enrico Priolo ◽  
Stefano Parolai
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Alluvial Soil ◽  
Site Amplification ◽  
Single Step ◽  
Reference Station ◽  
Ground Acceleration ◽  
Amplification Factors ◽  
Generalized Inversion ◽  
Northeastern Italy

ABSTRACT The application of earthquake recordings to the estimation of an event’s magnitude and the construction of rapid-response ground-motion maps requires an adequate classification of the recording stations in terms of their site response. For permanent stations, this information can be obtained from a sufficiently large database of past recordings. In this work, we analyze more than 7300 three-component recordings collected between 1996 and 2017 by 67 permanent stations in northeastern Italy to assess their site amplification. The signals come from 368 earthquakes with a magnitude range of M 3.2–5.8 and a distance range of 10–300 km. We evaluate the frequency-dependent amplification function with respect to a reference station with a flat seismic noise horizontal-to-vertical spectral ratio. The evaluation relies on the decomposition of the S-wave amplitude spectra in terms of source, propagation, and site response. We solve the decomposition with a nonparametric, single-step generalized inversion in the frequency band 0.5–20 Hz. In addition, we compute the amplification factors for peak ground acceleration and velocity with respect to a well-established ground-motion prediction equation. The results highlight that only 11 stations show a relatively flat unitary response with respect to the reference site, whereas the frequency-averaged amplification function at 23 out of 67 stations exhibits a value larger than 2. We classified the sites according to their surface geology and geomorphological scenario and found that amplification affects not only stations installed on the alluvial soil but also several stations installed on what are assumed to be rock sites. Sites in caves and mines exhibit deamplification, whereas the stations with sensors in boreholes exhibit the typical interference pattern. A good correlation between the amplification factors and the frequency-averaged amplification functions suggests the possibility of predicting time-domain peak ground-motion values from amplification functions estimated by generalized inversion.

The NSF Earthquake Disaster Mitigation Research Program

1998 ◽  
Vol 14 (3) ◽  
pp. 433-440 ◽  
Author(s):  
S. C. Liu ◽  
W. Anderson ◽  
C. Astill ◽  
L. Weber
Keyword(s):  
Earthquake Engineering ◽  
Research Program ◽  
High Performance ◽  
Earthquake Hazard ◽  
Disaster Mitigation ◽  
Earthquake Simulation ◽  
Cooperative Research ◽  
Earthquake Disaster ◽  
Engineering Research ◽  
The U.S

This paper presents several major developments and research initiatives of NSF's program in earthquake hazard mitigation. These activities include (1) establishment of three new earthquake engineering research centers in the U.S., (2) initiation of a major five-year cooperative research program on urban earthquake disaster mitigation between the U.S. and Japan, (3) initiation of two joint center-to-center projects between the U.S. and Japan, and (4) planning for a high-performance earthquake simulation facility network in the U.S. These activities highlight the ever-increasing importance of research innovations for earthquake disaster mitigation and the continuing challenges for cooperation between the U.S. and Japan.

Ground-Motion Models for the Prediction of Significant Duration Using Strong-Motion Data from Iran

2020 ◽  
Vol 110 (1) ◽  
pp. 319-330 ◽  
Author(s):  
Ali Meimandi-Parizi ◽  
Masoud Daryoushi ◽  
Abbas Mahdavian ◽  
Hamid Saffari
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Functional Form ◽  
Prediction Models ◽  
Strong Motion ◽  
Engineering Research ◽  
Significant Duration ◽  
Rate Of Increase ◽  
Peer Models ◽  
Rupture Distance

ABSTRACT In this study, new prediction equations for significant duration (DS5–75 and DS5–95) are developed using an Iranian strong ground-motion database. The database includes 2228 records of 749 earthquakes with small to large magnitudes up to the year 2018. The functional form of the model is an additive natural logarithm of four predictor variables, namely moment magnitude (Mw), rupture distance (Rrup), time-averaged shear-wave velocity in the top 30 m (VS30), and the style of faulting effect (Fm), which is considered as an indicator directly in the functional form for the first time. The proposed models can be used to estimate significant durations of earthquakes with moment magnitudes (Mw) from 4.5 to 7.6 and rupture distances of up to 200 km. The models are compared with four existing significant-duration prediction models. The results indicate proper agreement between the proposed models and the models that use the Pacific Earthquake Engineering Research Center-Next Generation Attenuation-West2 Project (PEER-NGA West2) database (say PEER models). Based on the results, our proposed models indicate an increasing trend of significant duration with an increase in the rupture distance. However, unlike the PEER models, the rate of increase in significant duration is decreasing in our model.

An Overview of the NGA Project

2008 ◽  
Vol 24 (1) ◽  
pp. 3-21 ◽  
Author(s):  
Maurice Power ◽  
Brian Chiou ◽  
Norman Abrahamson ◽  
Yousef Bozorgnia ◽  
Thomas Shantz ◽  
...  
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Research Program ◽  
Development Process ◽  
Strong Motion ◽  
Engineering Research ◽  
Motion Models ◽  
Ground Motion Attenuation ◽  
Attenuation Models ◽  
Ground Motion Models

The “Next Generation of Ground-Motion Attenuation Models” (NGA) project is a multidisciplinary research program coordinated by the Lifelines Program of the Pacific Earthquake Engineering Research Center (PEER), in partnership with the U.S. Geological Survey and the Southern California Earthquake Center. The objective of the project is to develop new ground-motion prediction relations through a comprehensive and highly interactive research program. Five sets of ground-motion models were developed by teams working independently but interacting with one another throughout the development process. The development of ground-motion models was supported by other project components, which included (1) developing an updated and expanded PEER database of recorded ground motions, including supporting information on the strong-motion record processing, earthquake sources, travel path, and recording station site conditions; (2) conducting supporting research projects to provide guidance on the selected functional forms of the ground-motion models; and (3) conducting a program of interactions throughout the development process to provide input and reviews from both the scientific research and engineering user communities. An overview of the NGA project components, process, and products is presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document