Summary of the ASK14 Ground Motion Relation for Active Crustal Regions

2014 ◽  
Vol 30 (3) ◽  
pp. 1025-1055 ◽  
Author(s):  
Norman A. Abrahamson ◽  
Walter J. Silva ◽  
Ronnie Kamai

Empirical ground motion models for the average horizontal component from shallow crustal earthquakes in active tectonic regions are derived using the PEER NGA-West2 database. The model is applicable to magnitudes 3.0–8.5, distances 0–300 km, and spectral periods of 0–10 s. The model input parameters are the same as those used by Abrahamson and Silva (2008) , with the following exceptions: the loading level for nonlinear effects is based on the spectral acceleration at the period of interest rather than the PGA; and the distance scaling for hanging wall (HW) effects off the ends of the rupture includes a dependence on the source-to-site azimuth. Regional differences in large-distance attenuation and V S30 scaling between California, Japan, China, and Taiwan are included. The scaling for the HW effect is improved using constraints from numerical simulations. The standard deviation is magnitude-dependent, with smaller magnitudes leading to larger standard deviations at short periods, but smaller standard deviations at long periods. Directivity effects are not included through explicit parameters, but are captured through the variability of the empirical data.

2014 ◽  
Vol 30 (3) ◽  
pp. 1117-1153 ◽  
Author(s):  
Brian S.-J. Chiou ◽  
Robert R. Youngs

We present an update to our 2008 NGA model for predicting horizontal ground motion amplitudes caused by shallow crustal earthquakes occurring in active tectonic environments. The update is based on analysis of the greatly expanded NGA-West2 ground motion database and numerical simulations. The updated model contains minor adjustments to our 2008 functional form related to style of faulting effects, hanging wall effects, scaling with the depth to top of rupture, scaling with sediment thickness, and the inclusion of additional terms for the effects of fault dip and rupture directivity. In addition, we incorporate regional differences in far-source distance attenuation and site effects between California and other active tectonic regions. Compared to our 2008 NGA model, the predicted medians by the updated model are similar for M > 7 and are lower for M < 5. The aleatory variability is larger than that obtained in our 2008 model.


2010 ◽  
Vol 26 (4) ◽  
pp. 907-926 ◽  
Author(s):  
Brian Chiou ◽  
Robert Youngs ◽  
Norman Abrahamson ◽  
Kofi Addo

This paper presents the development of a ground-motion prediction model for small-to-moderate shallow crustal earthquakes (3M5.5, up to 200 km distance) using data from the California ShakeMap systems. Our goal is to provide an empirical model that can be confidently used in the investigation of ground-motion difference between California and other active tectonic regions (such as the Pacific Northwest and British Columbia, Canada) where the bulk of ground-motion data from shallow crustal earthquakes is in the small-to-moderate magnitude range. This attenuation model is developed as a small-magnitude extension of the Chiou and Youngs NGA model (CY2008). We observe, and incorporate into this model, a regional difference in median amplitude between central and southern California earthquakes. The strength of the regional difference diminishes with increasing spectral period. More importantly, it is magnitude dependent and becomes insignificant for M6 earthquakes, as indicated by the large-magnitude California data used in CY2008. Together, these findings have important implications on the practice of utilizing the regional differences observed in small-to-moderate earthquakes to infer the regional differences expected in large earthquakes, including the NGA model applicability in active tectonic regions outside California.


2008 ◽  
Vol 24 (1) ◽  
pp. 67-97 ◽  
Author(s):  
Norman Abrahamson ◽  
Walter Silva

Empirical ground-motion models for the rotation-independent average horizontal component from shallow crustal earthquakes are derived using the PEER NGA database. The model is applicable to magnitudes 5–8.5, distances 0–200 km, and spectral periods of 0–10 sec. In place of generic site categories (soil and rock), the site is parameterized by average shear-wave velocity in the top 30 m ( VS30) and the depth to engineering rock (depth to VS=1000 m/s). In addition to magnitude and style-of-faulting, the source term is also dependent on the depth to top-of-rupture: for the same magnitude and rupture distance, buried ruptures lead to larger short-period ground motions than surface ruptures. The hanging-wall effect is included with an improved model that varies smoothly as a function of the source properties (M, dip, depth), and the site location. The standard deviation is magnitude dependent with smaller magnitudes leading to larger standard deviations. The short-period standard deviation model for soil sites is also distant-dependent due to nonlinear site response, with smaller standard deviations at short distances.


2017 ◽  
Vol 33 (2) ◽  
pp. 499-528 ◽  
Author(s):  
Zeynep Gülerce ◽  
Ronnie Kamai ◽  
Norman A. Abrahamson ◽  
Walter J. Silva

Empirical ground motion models for the vertical component from shallow crustal earthquakes in active tectonic regions are derived using the PEER NGA-West2 database. The model is applicable to magnitudes 3.0–8.0, distances of 0–300 km, and spectral periods of 0–10 s. The model input parameters are the same as used by Abrahamson et al. (2014) except that the nonlinear site response and depth to bedrock effects are evaluated but found to be insignificant. Regional differences in large distance attenuation and site amplification scaling between California, Japan, China, Taiwan, Italy, and the Middle East are included. Scaling for the hanging-wall effect is incorporated using the constraints from numerical simulations by Donahue and Abrahamson (2014) . The standard deviation is magnitude dependent with smaller magnitudes leading to larger standard deviations at short periods but smaller standard deviations at long periods. The vertical ground motion model developed in this study can be paired with the horizontal component model proposed by Abrahamson et al. (2014) to produce a V/H ratio. For applications where the horizontal spectrum is derived from the weighted average of several horizontal ground motion models, a V/H model derived directly from the V/H data (such as Gülerce and Abrahamson 2011 ) should be preferred.


2008 ◽  
Vol 24 (1) ◽  
pp. 173-215 ◽  
Author(s):  
BrianS-J. Chiou ◽  
Robert R. Youngs

We present a model for estimating horizontal ground motion amplitudes caused by shallow crustal earthquakes occurring in active tectonic environments. The model provides predictive relationships for the orientation-independent average horizontal component of ground motions. Relationships are provided for peak acceleration, peak velocity, and 5-percent damped pseudo-spectral acceleration for spectral periods of 0.01 to 10 seconds. The model represents an update of the relationships developed by Sadigh et. al. (1997) and incorporates improved magnitude and distance scaling forms as well as hanging-wall effects. Site effects are represented by smooth functions of average shear wave velocity of the upper 30 m ( VS30) and sediment depth. The new model predicts median ground motion that is similar to Sadigh et. al. (1997) at short spectral period, but lower ground motions at longer periods. The new model produces slightly lower ground motions in the distance range of 10 to 50 km and larger ground motions at larger distances. The aleatory variability in ground motion amplitude was found to depend upon earthquake magnitude and on the degree of nonlinear soil response, For large magnitude earthquakes, the aleatory variability is larger than found by Sadigh et. al. (1997).


Author(s):  
Soumya Kanti Maiti ◽  
Gony Yagoda-Biran ◽  
Ronnie Kamai

ABSTRACT Models for estimating earthquake ground motions are a key component in seismic hazard analysis. In data-rich regions, these models are mostly empirical, relying on the ever-increasing ground-motion databases. However, in areas in which strong-motion data are scarce, other approaches for ground-motion estimates are sought, including, but not limited to, the use of simulations to replace empirical data. In Israel, despite a clear seismic hazard posed by the active plate boundary on its eastern border, the instrumental record is sparse and poor, leading to the use of global models for hazard estimation in the building code and all other engineering applications. In this study, we develop a suite of alternative ground-motion models for Israel, based on an empirical database from Israel as well as on four data-calibrated synthetic databases. Two host models are used to constrain model behavior, such that the epistemic uncertainty is captured and characterized. Despite the lack of empirical data at large magnitudes and short distances, constraints based on the host models or on the physical grounds provided by simulations ensure these models are appropriate for engineering applications. The models presented herein are cast in terms of the Fourier amplitude spectra, which is a linear, physical representation of ground motions. The models are suitable for shallow crustal earthquakes; they include an estimate of the median and the aleatory variability, and are applicable in the magnitude range of 3–8 and distance range of 1–300 km.


Sign in / Sign up

Export Citation Format

Share Document