Displacement-Based Probabilistic Seismic Demand Analyses of Earth Slopes in the Near-Fault Region

2016 ◽  
Vol 32 (2) ◽  
pp. 1141-1163 ◽  
Author(s):  
Adrian Rodriguez-Marek ◽  
Jian Song
Keyword(s):  
Ground Motions ◽  
Seismic Demands ◽  
Adequate Treatment ◽  
Ground Shaking ◽  
Nonlinear Seismic Response ◽  
Near Fault ◽  
Probabilistic Seismic Demand ◽  
Earth Slopes ◽  
Displacement Based ◽  
Fault Region

Near-fault pulses can result in high seismic demands on slopes in the proximity of a fault. A probabilistic methodology to capture the effects of near-fault pulses on seismically-induced slope displacements is proposed. This methodology allows for a separate and more adequate treatment of the sliding displacement of slopes when these are subject to pulse-like near-fault forward directivity motions. Simplified pulse parameters are used to predict displacements for cases where the near-fault pulses may induce resonances in the slope. The method explicitly includes the effects of near-fault pulses both on the ground shaking and nonlinear seismic response of slopes. An example application illustrates the use of the proposed procedure. Results show that the proposed approach increases the predicted earthquake-induced displacements of earth slopes located near the fault. Finally, the proposed procedure generates hazard deaggregation plots that are a useful tool for selecting ground motions for the design of slopes near faults.

scholarly journals Analysis of the Seismic Demand of High-Performance Buckling-Restrained Braces under a Strong Earthquake and Its Aftershocks

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Luqi Xie ◽  
Jing Wu ◽  
Qing Huang ◽  
Chao Tong
Keyword(s):  
Plastic Deformation ◽  
Ground Motion ◽  
Strong Earthquake ◽  
High Performance ◽  
Hazard Analysis ◽  
Ground Motions ◽  
Threshold Value ◽  
Seismic Demand ◽  
Near Fault ◽  
Probabilistic Seismic Demand

The analysis of the ductility and cumulative plastic deformation (CPD) demand of a high-performance buckling-restrained brace (HPBRB) under a strong earthquake and its aftershocks is conducted in this paper. A combination of three continuous excitations with the same ground motion is used to simulate the affection of a strong earthquake and its aftershocks. A six-story HPBRB frame (HPBRBF) is taken as an example to conduct the incremental dynamic analysis (IDA). The seismic responses of the HPBRBF under one, two, and three constant continuous ground motions are compared. The IDA result indicates that the ductility and CPD demand of the BRBs under the three constant continuous ground motions are significantly larger than that excited by only one. Probabilistic seismic demand analysis (PSDA) is performed using seven near-fault ground motions and seven far-fault ground motions to consider the indeterminacy of ground motion. The probabilistic seismic demand curves (PSDCs) for the ductility and CPD demand for the HPBRB under the strong earthquake and its aftershocks are obtained in combining the probabilistic seismic hazard analysis. The results indicate that the AISC threshold value of the CPD with 200 is excessively low for a HPBRBF which suffers the continuous strong aftershocks with near-fault excitations, and a stricter threshold value should be suggested to ensure the ductility and plastic deformation capacity demand of the HPBRB.

Inelastic Displacement Spectra and Its Utilization of DDB Design for Seismic Isolated Bridges Subjected to Near-Fault Pulse-Like Ground Motions

2019 ◽  
Vol 35 (3) ◽  
pp. 1109-1140 ◽  
Author(s):  
Yi-feng Wu ◽  
Hao Wang ◽  
Jian Li ◽  
Ben Sha ◽  
Ai-qun Li
Keyword(s):  
Design Method ◽  
Ground Motions ◽  
Single Degree Of Freedom ◽  
Sdof System ◽  
Inelastic Displacement ◽  
Displacement Spectra ◽  
Near Fault ◽  
The Mean ◽  
Displacement Based ◽  
Isolated Bridges

A variety of research has focused on the inelastic displacement demand of a single degree of freedom (SDOF) system when subjected to near-fault pulse-like ground motions, in which the concerned ductility, μ, is typically lower than ten for normal structures. However, for seismic isolated structures that are more prone to large displacement, the corresponding research is limited. The purpose of this paper is to investigate the inelastic displacement spectra of an SDOF system with μ ranging from 5 to 70 and further proposes a direct displacement-based (DDB) design method for seismic isolated bridges. More concretely, a pool of near-fault pulse-like records is assembled, the mean C μ as a function of T/ T p is developed, and the influences of the ductility, μ, and the post-to-pre-yield ratio, α, on C μ are carefully investigated. Then the corresponding inelastic displacement spectra, S d, are obtained, and a comprehensive piecewise expression is proposed to fit S d. After that, the utilization of the spectra for the DDB design of a three-span seismic isolated continuous bridge is performed, and the principal of simplifying the bridge to an SDOF system is carefully explained and verified.

Impact of Near-Fault Ground Motions on the Efficiency of Viscous-Damping Systems

2016 ◽  
Author(s):  
Yin-Nan Huang ◽  
Chia-Ren Liu
Keyword(s):  
Energy Dissipation ◽  
Ground Motions ◽  
Viscous Damping ◽  
Major Focus ◽  
Seismic Demands ◽  
Single Degree ◽  
Near Fault ◽  
Long Period ◽  
The Impact ◽  
Damping Systems

Energy dissipation systems can effectively reduce the seismic demands of structures and protect them from damage. However, the effectiveness of the systems is not entirely independent from the dynamic characteristics of ground motions and may be challenged by long-period velocity pulses in near-fault ground motions. The major focus of this study is to clarify the impact of the characteristics of near-fault ground motions on the effectiveness of energy dissipation systems, particularly, structures equipped with viscous dampers. A series of response-history analyses are conducted using single degree-of-systems (SDOF) with periods varying between 0.2 and 5 seconds and damping ratios between 5% and 50% and subjected to fault-normal components of 91 sets of near-fault ground motions identified in a literature prepared by Prof. Jack Baker in 2007. The effectiveness of damping in reducing seismic demands of SDOF systems subjected to near-fault motions are discussed and a model are proposed to describe their relationship.

Ground Motion Selection in the Near-Fault Region considering Directivity-Induced Pulse Effects

2019 ◽  
Vol 35 (2) ◽  
pp. 759-786 ◽  
Author(s):  
Karim Tarbali ◽  
Brendon A. Bradley ◽  
Jack W. Baker
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Hazard Analysis ◽  
Ground Motions ◽  
Seismic Hazard Analysis ◽  
Response Analysis ◽  
Seismic Demand ◽  
Ground Motion Selection ◽  
Near Fault ◽  
Fault Region

This paper focuses on the selection of ground motions for seismic response analysis in the near-fault region, where directivity effects are significant. An approach is presented to consider forward directivity velocity pulse effects in seismic hazard analysis without separate hazard calculations for ‘pulse-like’ and ‘non-pulse-like’ ground motions, resulting in a single target hazard (at the site of interest) for ground motion selection. The ability of ground motion selection methods to appropriately select records that exhibit pulse-like ground motions in the near-fault region is then examined. Applications for scenario and probabilistic seismic hazard analysis cases are examined through the computation of conditional seismic demand distributions and the seismic demand hazard. It is shown that ground motion selection based on an appropriate set of intensity measures (IMs) will lead to ground motion ensembles with an appropriate representation of the directivity-included target hazard in terms of IMs, which are themselves affected by directivity pulse effects. This alleviates the need to specify the proportion of pulse-like motions and their pulse periods a priori as strict criteria for ground motion selection.

DEVELOPMENT OF AN IMPROVED INTENSITY MEASURE IN ORDER TO REDUCE THE VARIABILITY IN SEISMIC DEMANDS UNDER NEAR-FAULT GROUND MOTIONS

2012 ◽  
Vol 06 (02) ◽  
pp. 1250012 ◽  
Author(s):  
A. YAHYAABADI ◽  
M. TEHRANIZADEH
Keyword(s):  
Seismic Performance ◽  
Ground Motions ◽  
Intensity Measure ◽  
Seismic Performance Assessment ◽  
Seismic Demands ◽  
Demand Prediction ◽  
Near Fault ◽  
Long Period ◽  
Short Period ◽  
Pseudo Spectral

Intensity measure (IM) which describes the strength of an earthquake record plays an important role in the seismic performance assessment of structures. An improved IM that can reduce the variability in seismic demands helps reducing the number of records necessary to predict the seismic performance with sufficient accuracy. In this study, an improved RMS-based IM is developed based on the results obtained from incremental dynamic analyses of short-to relatively long-period frames under an ensemble of near-fault pulse-like earthquake records. It is observed that the root-mean-square value of pseudo spectral accelerations, (Sa) rms , is generally superior to that of spectral velocities, (Sv) rms , in seismic demand prediction under near-fault records. To compute (Sa) rms as IM, two appropriate period ranges are suggested for short- and moderated-to relatively long-period frames, respectively. Comparing the efficiency of (Sa) rms with several advanced IMs shows that (Sa) rms is more efficient in predicting the inelastic response and collapse capacity of short-period frames. It is also found that intensity measure (Sa) rms is sufficient with respect to the magnitude and source-to-site distance for all frames of various heights under near-fault ground motions.

Sign in / Sign up

Export Citation Format

Share Document