scholarly journals Exploiting the airwave for time-lapse reservoir monitoring with CSEM on land

Geophysics ◽  
2011 ◽  
Vol 76 (3) ◽  
pp. A15-A19 ◽  
Author(s):  
Marwan Wirianto ◽  
Wim A. Mulder ◽  
Evert C. Slob
Keyword(s):  
Signal To Noise Ratio ◽  
Time Lapse ◽  
Delta Function ◽  
Skin Depth ◽  
Function Type ◽  
Heterogeneous Model ◽  
Near Surface ◽  
Hydrocarbon Reservoir ◽  
The Earth ◽  
Reservoir Monitoring

In the application of controlled source electromagnetics for reservoir monitoring on land, repeatability errors in the source will mask the time-lapse signal due to hydrocarbon production when recording surface data close to the source. We demonstrate that at larger distances, the airwave will still provide sufficient illumination of the target. The primary airwave diffuses downward into the earth and then is scattered back to the surface. The time-lapse difference of its recorded signal reveals the outline on the surface of the resistivity changes in a hydrocarbon reservoir under production. However, repeatability errors in the primary airwave can destroy the signal-to-noise ratio of the time-lapse data. We present a simple and effective method to remove the primary airwave from the data, which we call partial airwave removal. For a homogeneous half space and a delta-function type of source, the surface expression of the airwave does not depend on frequency. For this reason, the primary airwave can be subtracted from the data using recordings at two frequencies, one low enough with a skin depth of the order of the reservoir depth that is sensitive to the reservoir, the other high enough to only sense the near surface. The method does not affect secondary airwave components created by signals that have propagated through the earth and returned to the surface. We show that the method provides a direct indicator of production-related time-lapse changes in the reservoir. We illustrate this for several models, including a general 3D heterogeneous model and one with strong surface topography, for situations where survey repeatability errors are large.

Making seismic monitoring work in a complex desert environment — 4D processing

2019 ◽  
Vol 38 (8) ◽  
pp. 637-645 ◽  
Author(s):  
Robert Smith ◽  
Emad Hemyari ◽  
Andrey Bakulin ◽  
Abdullah Alramadhan
Keyword(s):  
Survey Design ◽  
Signal To Noise Ratio ◽  
Time Lapse ◽  
Seismic Monitoring ◽  
Carbonate Reservoir ◽  
Acquisition System ◽  
Desert Environment ◽  
Near Surface ◽  
Different Seasons ◽  
Processing Techniques

Seismic monitoring of an onshore carbonate reservoir in a desert environment has been achieved for the first time. Optimizing data repeatability was key to detecting the weak 4D (time-lapse) signal resulting from a fluid-injection program, which was achieved through a combination of specialized survey design, careful acquisition, and dedicated 4D processing. The hybrid acquisition system utilized buried geophones, which significantly reduced 4D noise caused by variability in the near-surface environment. Despite the extensive acquisition efforts, time-lapse processing is an essential component of achieving highly repeatable data. A fit-for-purpose workflow was developed to reduce the remaining 4D noise using a combination of parallel and simultaneous processing. Processing steps leading to the largest improvement in reflection signal-to-noise ratio, such as noise attenuation, amplitude balancing, and supergrouping, produced the largest reduction in 4D noise. Outstanding final migrated data repeatability has been achieved, comparable to levels reported for the more favorable permanent marine systems. However, the need to use surface sources results in a seasonal imprint on data repeatability, which hinders the interpretation of surveys acquired during different seasons. In the absence of a fully buried acquisition system, advanced processing techniques such as surface-consistent matching filters may be required to resolve these variations.

The feasibility of reservoir monitoring using time-lapse marine CSEM

Geophysics ◽  
2009 ◽  
Vol 74 (2) ◽  
pp. F21-F29 ◽  
Author(s):  
Arnold Orange ◽  
Kerry Key ◽  
Steven Constable
Keyword(s):  
Extraction Efficiency ◽  
Time Lapse ◽  
Small Signal ◽  
Controlled Source ◽  
Hydrocarbon Reservoir ◽  
Reservoir Monitoring ◽  
Fluid Properties ◽  
Reservoir Geometry ◽  
Marine Csem ◽  
Percent Accuracy

Monitoring changes in hydrocarbon reservoir geometry and pore-fluid properties that occur during production is a critical part of estimating extraction efficiency and quantifying remaining reserves. We examine the applicability of the marine controlled-source electromagnetic (CSEM) method to the reservoir-monitoring problem by analyzing representative 2D models. These studies show that CSEM responses exhibit small but measureable changes that are characteristic of reservoir-depletion geometry, with lateral flooding producing a concave-up depletion-anomaly curve and bottom flooding producing a concave-down depletion-anomaly curve. Lateral flooding is also revealed by the spatial-temporal variation of the CSEM anomaly, where the edge of the response anomaly closely tracks the retreating edge of the flooding reservoir. Measureable changes in CSEM responses are observed when 10% of the resistive reservoir is replaced by conductive pore fluids. However, to avoid corrupting the relatively small signal changes associated with depletion, the acquisition geometry must be maintained to a fraction of a percent accuracy. Additional factors, such as unknown nearby seafloor inhomogeneities and variable seawater conductivity, can mask depletion anomalies if not accounted for during repeat monitoring measurements. Although addressing these factors may be challenging using current exploration CSEM practices, straightforward solutions such as permanent monuments for seafloor receivers and transmitters are available and suggest the method could be utilized with present-day technology.

scholarly journals Near-surface real-time seismic imaging using parsimonious interferometry

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sherif M. Hanafy ◽  
Hussein Hoteit ◽  
Jing Li ◽  
Gerard T. Schuster
Keyword(s):  
Fluid Flow ◽  
Real Time ◽  
Temporal Resolution ◽  
Seismic Imaging ◽  
Time Lapse ◽  
Rock Properties ◽  
Recording Time ◽  
Near Surface ◽  
Arrival Times ◽  
Order Of Magnitude

AbstractResults are presented for real-time seismic imaging of subsurface fluid flow by parsimonious refraction and surface-wave interferometry. Each subsurface velocity image inverted from time-lapse seismic data only requires several minutes of recording time, which is less than the time-scale of the fluid-induced changes in the rock properties. In this sense this is real-time imaging. The images are P-velocity tomograms inverted from the first-arrival times and the S-velocity tomograms inverted from dispersion curves. Compared to conventional seismic imaging, parsimonious interferometry reduces the recording time and increases the temporal resolution of time-lapse seismic images by more than an order-of-magnitude. In our seismic experiment, we recorded 90 sparse data sets over 4.5 h while injecting 12-tons of water into a sand dune. Results show that the percolation of water is mostly along layered boundaries down to a depth of a few meters, which is consistent with our 3D computational fluid flow simulations and laboratory experiments. The significance of parsimonious interferometry is that it provides more than an order-of-magnitude increase of temporal resolution in time-lapse seismic imaging. We believe that real-time seismic imaging will have important applications for non-destructive characterization in environmental, biomedical, and subsurface imaging.

scholarly journals Time-lapse imaging of CO2 migration within near-surface sediments during a controlled sub-seabed release experiment

2021 ◽  
Vol 109 ◽  
pp. 103363
Author(s):  
Ben Roche ◽  
Jonathan M. Bull ◽  
Hector Marin-Moreno ◽  
Timothy G. Leighton ◽  
Ismael H. Falcon-Suarez ◽  
...  
Keyword(s):  
Surface Sediments ◽  
Time Lapse ◽  
Near Surface ◽  
Release Experiment ◽  
Time Lapse Imaging

Dynamic Petrophysics-Applications of Time-Lapse Reservoir Monitoring in Saudi Arabia

2005 ◽  
Author(s):  
Shouxiang Mark Ma ◽  
Raghu Ramamoorthy ◽  
Abdulrasool Al-Hajari ◽  
Oscar Kelder ◽  
Ashok Srivastava
Keyword(s):  
Saudi Arabia ◽  
Time Lapse ◽  
Reservoir Monitoring

Spatially limited tomographic inversion for time-lapse oil reservoir monitoring

2002 ◽  
Vol 33 (1) ◽  
pp. 18-22
Author(s):  
Toshiyuki Yokota ◽  
Akio Nishida ◽  
Shigeharu Mizohata ◽  
Sunao Muraoka
Keyword(s):  
Time Lapse ◽  
Oil Reservoir ◽  
Tomographic Inversion ◽  
Reservoir Monitoring

4D-Quantification of alpine permafrost degradation in a bedrock ridge using multiple inversion schemes and deformation measurements

2021 ◽  
Author(s):  
Maike Offer ◽  
Riccardo Scandroglio ◽  
Daniel Draebing ◽  
Michael Krautblatter
Keyword(s):  
Climate Change ◽  
Mechanical Stability ◽  
Regularization Parameter ◽  
Time Lapse ◽  
Permafrost Degradation ◽  
Thermal Dynamics ◽  
Near Surface ◽  
Data Error ◽  
Near Surface Geophysics ◽  
Thawing Rate

<p>Warming of permafrost in steep rock walls decreases their mechanical stability and could triggers rockfalls and rockslides. However, the direct link between climate change and permafrost degradation is seldom quantified with precise monitoring techniques and long-term time series. Where boreholes are not possible, laboratory-calibrated Electrical Resistivity Tomography (ERT) is presumably the most accurate quantitative permafrost monitoring technique providing a sensitive record for frozen vs. unfrozen bedrock. Recently, 4D inversions allow also quantification of frozen bedrock extension and of its changes with time (Scandroglio et al., in review).</p><p>In this study we (i) evaluate the influence of the inversion parameters on the volumes and (ii) connect the volumetric changes with measured mechanical consequences.</p><p>The ERT time-serie was recorded between 2006 and 2019 in steep bedrock at the permafrost affected Steintälli Ridge (3100 m asl). Accurately positioned 205 drilled-in steel electrodes in 5 parallel lines across the rock ridge have been repeatedly measured with similar hardware and are compared to laboratory temperature-resistivity (T–ρ) calibration of water-saturated samples from the field. Inversions were conducted using the open-source software BERT for the first time with the aim of estimating permafrost volumetric changes over a decade.</p><p>(i) Here we present a sensitivity analysis of the outcomes by testing various plausible inversion set-ups. Results are computed with different input data filters, data error model, regularization parameter (λ), model roughness reweighting and time-lapse constraints. The model with the largest permafrost degradation was obtained without any time-lapse constraints, whereas constraining each model with the prior measurement results in the smallest degradation. Important changes are also connected to the data error estimation, while other setting seems to have less influence on the frozen volume. All inversions confirmed a drastic permafrost degradation in the last 13 years with an average reduction of 3.900±600 m<sup>3</sup> (60±10% of the starting volume), well in agreement with the measured air temperatures increase.</p><p>(ii) Average bedrock thawing rate of ~300 m<sup>3</sup>/a is expected to significantly influence the stability of the ridge. Resistivity changes are especially evident on the south-west exposed side and in the core of the ridge and are here connected to deformations measured with tape extensometer, in order to precisely estimate the mechanical consequences of bedrock warming.</p><p>In summary, the strong degradation of permafrost in the last decade it’s here confirmed since inversion settings only have minor influence on volume quantification. Internal thermal dynamics need correlation with measured external deformation for a correct interpretation of stability consequences. These results are a fundamental benchmark for evaluating mountain permafrost degradation in relation to climate change and demonstrate the key role of temperature-calibrated 4D ERT.</p><p> </p><p>Reference:</p><p>Scandroglio, R. et al. (in review) ‘4D-Quantification of alpine permafrost degradation in steep rock walls using a laboratory-calibrated ERT approach’, <em>Near Surface Geophysics</em>.</p>

Anomalous Dielectric Variability in the central peak of Tycho crater on the Moon: New insights from Mini-RF S-band Observations

2021 ◽  
Author(s):  
Shashwat Shukla ◽  
Gerald Wesley Patterson
Keyword(s):  
Dielectric Constant ◽  
Hyperspectral Image ◽  
Central Peak ◽  
Skin Depth ◽  
The Moon ◽  
Near Surface ◽  
Low Dielectric ◽  
Crater Morphology ◽  
High Dielectric ◽  
The Impact

<p>One of the unique candidates to explore the evolution of physical surface processes on the Moon is Tycho, a dark haloed impact crater representing well-preserved bright ray pattern and intact crater morphology. Sampling of the central peak in such complex crater formation proves significant in terms of unraveling intriguing science of the lunar interior. With the current state-of-the-art radar technology, it is possible to evaluate the response of the geologic features constrained in the near surface and subsurface regolith environments. This can be achieved by modelling the dielectric constant of media, which is a physical parameter crucial for furthering our knowledge about the distribution of materials within different stratigraphic layers at multiple depths. Here, we used the applicability of Mini-RF S-band data augmented with a deep learning based inversion model to retrieve the dielectric variations over the central peak of the Tycho crater. A striking observation is made in certain regions of the central peak, wherein we observe anomalously high dielectric constant, not at all differentiated in the hyperspectral image and first Stokes parameter image, which usually is a representation of retrieved backscatter of the target. The results are also supported by comparing the variations in the scattering mechanisms. We found those particular regions to be associated with high degree of depolarization, thereby attributing to the presence of cm- to m- scale scatterers buried within a low dielectric layer that are not big enough to produce even-bounce geometry for the radar wave. Moreover, we also observe high rock concentration in the central peak slopes from DIVINER data and NAC images, indicating the exposure of clasts ranging in size from 10 meter to 100s of meter. Furthermore, from surface temperature data, these distinctive outcrops sense warmer temperature at night than the surrounding, which suggests the existence of thermal skin depth in such vicinities. Interestingly, we are able to quantify the pessimistic dielectric constant limit of the large boulder in the middle of the central peak, observable at the Mini-RF radar wavelength, as 4.54 + j0.077. Compared to the expected dielectric constant of rocks, this value is lowered significantly. One probable reason could be the emergence of small radar shadows due to the rugged surface of the boulder on the radar illuminated portion. From our analysis, we showcase the anomalous dielectric variability of Tycho central peak, thereby providing new insights into the evolution of the impact cratering process that could be important for both science and necessary for framing human or robotic exploration strategies.  </p>

Sign in / Sign up

Export Citation Format

Share Document