scholarly journals Recursive imaging with multiply scattered waves using partial image regularization: A North Sea case study

Geophysics ◽  
2011 ◽  
Vol 76 (2) ◽  
pp. B33-B42 ◽  
Author(s):  
Alison E. Malcolm ◽  
Maarten V. De Hoop ◽  
Bjørn Ursin
Keyword(s):  
North Sea ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Time Migration ◽  
Image Regularization ◽  
Scattered Energy ◽  
The One

As more resources are directed toward reverse time migration, an accurate velocity model, including strong reflectors, is necessary to form a clear image of the subsurface. This is of particular importance in the vicinity of salt, where singly scattered waves are often not ideal for imaging the salt flanks. This has led to interest in processing doubly scattered waves (also called duplex or prismatic waves) for imaging salt flanks and thus improving the location of salt boundaries in a velocity model. We used doubly scattered waves in a two-pass, one-way method to image salt flanks in a North Sea data set. By working in the one-way framework we were able to separately construct images with singly, doubly, and triply scattered waves. We used a multistep imaging process that includes multiply scattered waves by using an imaged reflector to fix one (or more) of the scattering points, allowing for multiply scattered energy from several reflectors, potentially with poor continuity, to be included without picking each reflector individually. With this method we were able to image the flank of a North Sea salt body.

Application of RTM 3D angle gathers to wide-azimuth data subsalt imaging

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB175-WB182 ◽  
Author(s):  
Yan Huang ◽  
Bing Bai ◽  
Haiyong Quan ◽  
Tony Huang ◽  
Sheng Xu ◽  
...  
Keyword(s):  
Model Updating ◽  
Velocity Model ◽  
Azimuth Angle ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Additional Information ◽  
Time Migration ◽  
Reflection Angle ◽  
Subsalt Imaging

The availability of wide-azimuth data and the use of reverse time migration (RTM) have dramatically increased the capabilities of imaging complex subsalt geology. With these improvements, the current obstacle for creating accurate subsalt images now lies in the velocity model. One of the challenges is to generate common image gathers that take full advantage of the additional information provided by wide-azimuth data and the additional accuracy provided by RTM for velocity model updating. A solution is to generate 3D angle domain common image gathers from RTM, which are indexed by subsurface reflection angle and subsurface azimuth angle. We apply these 3D angle gathers to subsalt tomography with the result that there were improvements in velocity updating with a wide-azimuth data set in the Gulf of Mexico.

Use of RTM full 3D subsurface angle gathers for subsalt velocity update and image optimization: Case study at Shenzi field

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB27-WB39 ◽  
Author(s):  
Zheng-Zheng Zhou ◽  
Michael Howard ◽  
Cheryl Mifflin
Keyword(s):  
Model Building ◽  
Transverse Isotropy ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Edge Diffraction ◽  
Time Migration ◽  
Image Optimization ◽  
Free Generation

Various reverse time migration (RTM) angle gather generation techniques have been developed to address poor subsalt data quality and multiarrival induced problems in gathers from Kirchhoff migration. But these techniques introduce new problems, such as inaccuracies in 2D subsurface angle gathers and edge diffraction artifacts in 3D subsurface angle gathers. The unique rich-azimuth data set acquired over the Shenzi field in the Gulf of Mexico enabled the generally artifact-free generation of 3D subsurface angle gathers. Using this data set, we carried out suprasalt tomography and salt model building steps and then produced 3D angle gathers to update the subsalt velocity. We used tilted transverse isotropy RTM with extended image condition to generate full 3D subsurface offset domain common image gathers, which were subsequently converted to 3D angle gathers. The angle gathers were substacked along the subsurface azimuth axis into azimuth sectors. Residual moveout analysis was carried out, and ray-based tomography was used to update velocities. The updated velocity model resulted in improved imaging of the subsalt section. We also applied residual moveout and selective stacking to 3D angle gathers from the final migration to produce an optimized stack image.

scholarly journals Reconstructing the primary reflections in seismic data by Marchenko redatuming and convolutional interferometry

Geophysics ◽  
2016 ◽  
Vol 81 (2) ◽  
pp. Q15-Q26 ◽  
Author(s):  
Giovanni Angelo Meles ◽  
Kees Wapenaar ◽  
Andrew Curtis
Keyword(s):  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Surface Reflection ◽  
Reflection Data ◽  
Reference Velocity ◽  
Time Migration ◽  
Recorded Data

State-of-the-art methods to image the earth’s subsurface using active-source seismic reflection data involve reverse time migration. This and other standard seismic processing methods such as velocity analysis provide best results only when all waves in the data set are primaries (waves reflected only once). A variety of methods are therefore deployed as processing to predict and remove multiples (waves reflected several times); however, accurate removal of those predicted multiples from the recorded data using adaptive subtraction techniques proves challenging, even in cases in which they can be predicted with reasonable accuracy. We present a new, alternative strategy to construct a parallel data set consisting only of primaries, which is calculated directly from recorded data. This obviates the need for multiple prediction and removal methods. Primaries are constructed by using convolutional interferometry to combine the first-arriving events of upgoing and direct-wave downgoing Green’s functions to virtual receivers in the subsurface. The required upgoing wavefields to virtual receivers are constructed by Marchenko redatuming. Crucially, this is possible without detailed models of the earth’s subsurface reflectivity structure: Similar to the most migration techniques, the method only requires surface reflection data and estimates of direct (nonreflected) arrivals between the virtual subsurface sources and the acquisition surface. We evaluate the method on a stratified synclinal model. It is shown to be particularly robust against errors in the reference velocity model used and to improve the migrated images substantially.

Reverse time migration of multiples: Reducing migration artifacts using the wavefield decomposition imaging condition

Geophysics ◽  
2017 ◽  
Vol 82 (4) ◽  
pp. S307-S314 ◽  
Author(s):  
Yibo Wang ◽  
Yikang Zheng ◽  
Qingfeng Xue ◽  
Xu Chang ◽  
Tong W. Fei ◽  
...  
Keyword(s):  
Complex Function ◽  
Synthetic Data ◽  
Velocity Model ◽  
High Amplitude ◽  
Frequency Noise ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Time Migration ◽  
Wavefield Decomposition

In the implementation of migration of multiples, reverse time migration (RTM) is superior to other migration algorithms because it can handle steeply dipping structures and offer high-resolution images of the complex subsurface. However, the RTM results using two-way wave equation contain high-amplitude, low-frequency noise and false images generated by improper wave paths in migration velocity model with sharp velocity interfaces or strong velocity gradients. To improve the imaging quality in RTM of multiples, we separate the upgoing and downgoing waves in the propagation of source and receiver wavefields. A complex function involved with the Hilbert transform is used in wavefield decomposition. Our approach is cost effective and avoids the large storage of wavefield snapshots required by the conventional wavefield separation technique. We applied migration of multiples with wavefield decomposition on a simple two-layer model and the Sigsbee 2B synthetic data set. Our results demonstrate that the proposed approach can improve the image generated by migration of multiples significantly.

Enhanced prestack depth imaging of wide-azimuth data from the Gulf of Mexico: A case history

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB79-WB86 ◽  
Author(s):  
Xuening Ma ◽  
Bin Wang ◽  
Cristina Reta-Tang ◽  
Wilfred Whiteside ◽  
Zhiming Li
Keyword(s):  
Image Quality ◽  
Gulf Of Mexico ◽  
Large Scale ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Delayed Imaging ◽  
Data Set ◽  
Depth Imaging ◽  
Time Migration

We present a case study of enhanced imaging of wide-azimuth data from the Gulf of Mexico utilizing recent technologies; and we discuss the resulting improvements in image quality, especially in subsalt areas, relative to previous results. The input seismic data sets are taken from many large-scale wide-azimuth surveys and conventional narrow-azimuth surveys located in the Mississippi Canyon and Atwater Valley areas. In the course of developing the enhanced wide azimuth processing flow, the following three key steps are found to have the most impact on improving subsalt imaging: (1) 3D true azimuth surface-related multiple elimination (SRME) to remove multiple energy, in particular, complex multiples beneath salt; (2) reverse-time migration (RTM) based delayed imaging time (DIT) scans to update the complex subsalt velocity model; and (3) tilted transverse isotropic (TTI) RTM to improve image quality. Our research focuses on the depth imaging aspects of the project, with particular emphasis on the application of the DIT scanning technique. The DIT-scan technique further improves the accuracy of the subsalt velocity model after conventional ray-based subsalt tomography has been performed. We also demonstrate the uplift obtained by acquiring a wide-azimuth data set relative to a standard narrow-azimuth data set, and how orthogonal wide-azimuth is able to enhance the subsalt illumination.

Reverse time migration of multiples: Eliminating migration artifacts in angle domain common image gathers

Geophysics ◽  
2014 ◽  
Vol 79 (6) ◽  
pp. S263-S270 ◽  
Author(s):  
Yibo Wang ◽  
Yikang Zheng ◽  
Lele Zhang ◽  
Xu Chang ◽  
Zhenxing Yao
Keyword(s):  
Free Surface ◽  
Radon Transform ◽  
Synthetic Data ◽  
Velocity Model ◽  
Migration Velocity ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Time Migration ◽  
Nonzero Curvature

Free-surface-related multiples are usually regarded as noise in conventional seismic processing. However, they can provide extra illumination of the subsurface and thus have been used in migration procedures, e.g., in one- and two-way wave-equation migrations. The disadvantage of the migration of multiples is the migration artifacts generated by the crosscorrelation of different seismic events, e.g., primaries and second-order free-surface-related multiples, so the effective elimination of migration artifacts is crucial for migration of multiples. The angle domain common image gather (ADCIG) is a suitable domain for testing the correctness of a migration velocity model. When the migration velocity model is correct, all the events in ADCIGs should be flat, and this provides a criterion for removing the migration artifacts. Our approach first obtains ADCIGs during reverse time migration and then applies a high-resolution parabolic Radon transform to all ADCIGs. By doing so, most migration artifacts will reside in the nonzero curvature regions in the Radon domain, and then a muting procedure can be implemented to remove the data components outside the vicinity of zero curvature. After the application of an adjoint Radon transform, the filtered ADCIGs are obtained and the final denoised migration result is generated by stacking all filtered ADCIGs. A three-flat-layer velocity model and the Marmousi synthetic data set are used for numerical experiments. The numerical results revealed that the proposed approach can eliminate most artifacts generated by migration of multiples when the migration velocity model is correct.

Dirty salt velocity inversion: The road to a clearer subsalt image

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB169-WB174 ◽  
Author(s):  
Shuo Ji ◽  
Tony Huang ◽  
Kang Fu ◽  
Zhengxue Li
Keyword(s):  
Model Building ◽  
Synthetic Data ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Velocity Inversion ◽  
Time Migration ◽  
And Migration ◽  
Subsalt Imaging

For deep-water Gulf of Mexico, accurate salt geometry is critical to subsalt imaging. This requires the definition of both external and internal salt geometries. In recent years, external salt geometry (i.e., boundaries between allochthonous salt and background sediment) has improved a great deal due to advances in acquisition, velocity model building, and migration algorithms. But when it comes to defining internal salt geometry (i.e., intrasalt inclusions or dirty salt), no efficient method has yet been developed. In common industry practices, intrasalt inclusions (and thus their velocity anomalies) are generally ignored during the model building stages. However, as external salt geometries reach higher levels of accuracy, it becomes more important to consider the once-ignored effects of dirty salt. We have developed a reflectivity-based approach for dirty salt velocity inversion. This method takes true-amplitude reverse time migration stack volumes as input, then estimates the dirty salt velocity based on reflectivity under a 1D assumption. Results from a 2D synthetic data set and a real 3D Wide Azimuth data set demonstrated that the reflectivity inversion scheme significantly improves the subsalt image for certain areas. In general, we believe that this method produces a better salt model than the traditional clean salt velocity approach.

Simultaneous reverse time migration of primaries and free-surface related multiples without multiple prediction

Geophysics ◽  
2014 ◽  
Vol 79 (1) ◽  
pp. S1-S9 ◽  
Author(s):  
Yibo Wang ◽  
Xu Chang ◽  
Hao Hu
Keyword(s):  
Free Surface ◽  
Field Data ◽  
Synthetic Data ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Imaging Condition ◽  
Time Migration ◽  
Multiple Prediction

Prestack reverse time migration (RTM) is usually regarded as an accurate imaging tool and has been widely used in exploration. Conventional RTM only uses primaries and treats free-surface related multiples as noise; however, free-surface related multiples can sometimes provide extra illumination of the subsurface, and this information could be used in migration procedures. There are many migration methods using free-surface related multiples, but most approaches need to predict multiples, which is time consuming and prone to error. We discovered a new RTM approach that uses the primaries and the free-surface related multiples simultaneously. Compared with migration methods that only use free-surface related multiples, the proposed approach can provide comparable migration results and does not need multiple predictions. In our approach, the source function in conventional RTM was replaced with recorded field data including primaries and free-surface related multiples, together with a synthetic wavelet; the back-propagated primaries in the conventional RTM were replaced with complete recorded field data. The imaging condition of the proposed approach was the same as the crosscorrelation imaging condition of conventional RTM. A three-layer velocity model with scatterers and the Sigsbee 2B synthetic data set were used for numerical experiments. The numerical results showed that the proposed approach can cover a wider range of the subsurface and provide better illumination compared with conventional RTM. The proposed approach was easy to implement and avoided tedious multiple prediction; it might be significant for general complex subsurface imaging.

Enhanced imaging with high-resolution full-waveform inversion and reverse time migration: A North Sea OBC case study

2014 ◽  
Vol 33 (9) ◽  
pp. 986-992 ◽  
Author(s):  
Andrew Ratcliffe ◽  
Antonio Privitera ◽  
Graham Conroy ◽  
Vetle Vinje ◽  
Alexandre Bertrand ◽  
...  
Keyword(s):  
High Resolution ◽  
North Sea ◽  
Waveform Inversion ◽  
Full Waveform Inversion ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Full Waveform ◽  
Time Migration ◽  
Enhanced Imaging

scholarly journals Reverse time migration of transmitted wavefields for salt boundary imaging

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. S71-S82 ◽  
Author(s):  
Chris Willacy ◽  
Maksym Kryvohuz
Keyword(s):  
Imaging Techniques ◽  
Velocity Model ◽  
Seismic Profile ◽  
Imaging Method ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Velocity Models ◽  
Transmission Imaging ◽  
Time Migration

The imaging of steep salt boundaries has received much attention with the advent of improved wider azimuth acquisition designs and advanced imaging techniques such as reverse time migration (RTM), for example. However, despite these advancements in capability, there are cases in which the salt boundary is either poorly illuminated or completely absent in the migrated image. To provide a solution to this problem, we have developed two RTM methods for imaging salt boundaries, which use transmitted wavefields. In the first technique, downgoing waves, typically recorded in walkaway vertical seismic profile surveys, are used to image the salt flank via the generation of aplanatic isochrones. This image can be generated in the absence of an explicit interpretation of the salt flank using dual migration velocity models, as demonstrated on a 3D walkaway field data set from the Gulf of Mexico. In the second technique, we extend the basic theory to include imaging of upgoing source wavefields, which are transmitted at the base salt from below, as acquired by a surface acquisition geometry. This technique has similarities to the prism-imaging method, yet it uses transmitted instead of reflected waves at the salt boundary. Downgoing and upgoing methods are shown to satisfactorily generate an image of the salt flank; however, transmission imaging can create artifacts if reflection arrivals are included in the migration or the acquisition geometry is limited in extent. Increased wavelet stretch is also observed due to the higher transmission coefficient. An important benefit of these methods is that transmission imaging produces an opposite depth shift to errors in the velocity model compared with imaging of reflections. When combined with conventional seismic reflection surveys, this behavior can be used to provide a constraint on the accuracy of the salt and/or subsalt velocities.

Sign in / Sign up

Export Citation Format

Share Document