Analysis of the surface waves present on the passive seismic data set recorded in the Mizil area (Romania)

2010 ◽  
Vol 29 (7) ◽  
pp. 796-799
Author(s):  
I. Panea ◽  
A. Bocin ◽  
V. Mocanu
Geophysics ◽  
2006 ◽  
Vol 71 (1) ◽  
pp. Q1-Q8 ◽  
Author(s):  
Mitchell S. Craig ◽  
Ronald L. Genter

The performance of a variety of areal geophone arrays was evaluated using seismic data recorded on a dense receiver grid in a walkaway survey conducted in the Permian Basin of west Texas. Surface waves, trapped waves, and scattered energy have long been recognized as a significant noise problem in this area. Arrays were formed by extracting sets of traces from the main data set and stacking them to produce individual traces of a receiver gather. We calculated semblance of each receiver gather to evaluate array performance. High values of semblance indicate that an array effectively removes surface waves while preserving reflections. Differences in data quality associated with variations in geophone-array design are often subtle and difficult to discern through simple inspection of field records. By calculating frequency-dependent semblance, we were able to detect and quantify differences in array performance.


2020 ◽  
Vol 22 (3) ◽  
pp. 23
Author(s):  
Anna Wahyu ◽  
Ade Filla Intan ◽  
Arddhiles Adhitama ◽  
Febrian Nur Fadhli ◽  
Ferda Elita Putri ◽  
...  

Subduction of Indo-Australia plate to Eurasia plate and locally active fault nearby Kulon Progo play as major source for earthquake events. After effect due to earthquake has different level of damage which depend on the magnitude and site characteristics. The horizontal-to-vertical spectral ratio (HVSR) passive seismic method is being used drastically to help in mapping the level of site vulnerability to earthquake event. HVSR analysis results help us acquire some physical values including weathered layer thickness where Vs 30 reference came from surface waves dispersion curve analysis of the MASW method as it is used as a parameter in calculating thickness value. Seismic refraction tomography is used to create subsurface model thus we may see the extent of underlying layer and its implication to earthquake event.Data measurements distribution are scattered in Kalirejo Village with the total of 63 passive seismic data, 33 MASW data, and 7 lines of seismic refraction acquisition. Some data show inadequate quality to be taken into further processing step, so data sorting activity should be carefully done. As a result, 21 of 63 passive seismic data are considered adequate to represent site physical values. Dominant frequency values ranging from 2 to 20 Hz, amplification factor varies between 1.5-12.5, and seismic vulnerability indices varies between 0.3-20. Surface waves dispersion curve inversion results are Vs 30 values ranging from 350 m/s to 980 m/s and seismic refraction tomography model shows Vp model with velocity values ranging from 0.2 to 3.2 km/s.


Author(s):  
Mélanie Drilleau ◽  
Henri Samuel ◽  
Attilio Rivoldini ◽  
Mark Panning ◽  
Philippe Lognonné

Summary The ongoing InSight mission has recently deployed very broad band seismometers to record the Martian seismic activity. These recordings constitute the first seismic data set collected at the surface of Mars. This unique but sparse record compels for the development of new techniques tailored to make the best use of the specific context of single station-multiple events with several possible ranges of uncertainties on the event location. To this end, we conducted sets of Markov chain Monte-Carlo inversions for the 1-D seismic structure of Mars. We compared two inversion techniques that differ from the nature of the parameterization on which they rely. A first classical approach based on a parameterization of the 1-D seismic profile using Bézier curves. A second, less conventional approach that relies on a parameterization in terms of quantities that influence the thermo-chemical evolution of the planet (mantle rheology, initial thermal state, and composition), which accounts for 4.5 Gyr of planetary evolution. We considered several combinations of true model parameters to retrieve, and explored the influence of the type of seismic data (body waves with or without surface waves), the number of events and their associated epicentral distances and uncertainties, and the presence of potential constraints on Moho depth inferred from independent measurements/considerations (receiver functions and gravity data). We show that due to its inherent tighter constraints the coupled approach allows a considerably better retrieval of Moho depth and the seismic structure underneath it than the classical inversion, under the condition that the physical assumptions made in coupled approach are valid for Mars. In addition, our tests indicate that in order to constrain the seismic structure of Mars with InSight data, the following independent conditions must be met: (1) The presence of surface waves triggered by an internal source to constrain the epicentral distance. (2) The presence of just a few well-localized impact sources, with at least one located at close epicentral distance (<5○) to illuminate independently the crust and the mantle. In addition to providing tighter constraints of Mars seismic structure, geodynamically-constrained inversions allow one to reconstruct the thermo-chemical and rheological history of Mars until present. Therefore, even with a relatively small amount of large events and in absence of surface waves, constraining the present-day structure and long-term evolution of the red planet remains possible through the use of tailored hybrid inversion schemes.


Geophysics ◽  
2006 ◽  
Vol 71 (5) ◽  
pp. U67-U76 ◽  
Author(s):  
Robert J. Ferguson

The possibility of improving regularization/datuming of seismic data is investigated by treating wavefield extrapolation as an inversion problem. Weighted, damped least squares is then used to produce the regularized/datumed wavefield. Regularization/datuming is extremely costly because of computing the Hessian, so an efficient approximation is introduced. Approximation is achieved by computing a limited number of diagonals in the operators involved. Real and synthetic data examples demonstrate the utility of this approach. For synthetic data, regularization/datuming is demonstrated for large extrapolation distances using a highly irregular recording array. Without approximation, regularization/datuming returns a regularized wavefield with reduced operator artifacts when compared to a nonregularizing method such as generalized phase shift plus interpolation (PSPI). Approximate regularization/datuming returns a regularized wavefield for approximately two orders of magnitude less in cost; but it is dip limited, though in a controllable way, compared to the full method. The Foothills structural data set, a freely available data set from the Rocky Mountains of Canada, demonstrates application to real data. The data have highly irregular sampling along the shot coordinate, and they suffer from significant near-surface effects. Approximate regularization/datuming returns common receiver data that are superior in appearance compared to conventional datuming.


Geophysics ◽  
2006 ◽  
Vol 71 (5) ◽  
pp. C81-C92 ◽  
Author(s):  
Helene Hafslund Veire ◽  
Hilde Grude Borgos ◽  
Martin Landrø

Effects of pressure and fluid saturation can have the same degree of impact on seismic amplitudes and differential traveltimes in the reservoir interval; thus, they are often inseparable by analysis of a single stacked seismic data set. In such cases, time-lapse AVO analysis offers an opportunity to discriminate between the two effects. We quantify the uncertainty in estimations to utilize information about pressure- and saturation-related changes in reservoir modeling and simulation. One way of analyzing uncertainties is to formulate the problem in a Bayesian framework. Here, the solution of the problem will be represented by a probability density function (PDF), providing estimations of uncertainties as well as direct estimations of the properties. A stochastic model for estimation of pressure and saturation changes from time-lapse seismic AVO data is investigated within a Bayesian framework. Well-known rock physical relationships are used to set up a prior stochastic model. PP reflection coefficient differences are used to establish a likelihood model for linking reservoir variables and time-lapse seismic data. The methodology incorporates correlation between different variables of the model as well as spatial dependencies for each of the variables. In addition, information about possible bottlenecks causing large uncertainties in the estimations can be identified through sensitivity analysis of the system. The method has been tested on 1D synthetic data and on field time-lapse seismic AVO data from the Gullfaks Field in the North Sea.


Geophysics ◽  
2015 ◽  
Vol 80 (5) ◽  
pp. B115-B129 ◽  
Author(s):  
Rie Kamei ◽  
Takayuki Miyoshi ◽  
R. Gerhard Pratt ◽  
Mamoru Takanashi ◽  
Shogo Masaya

2022 ◽  
Vol 41 (1) ◽  
pp. 54-61
Author(s):  
Moyagabo K. Rapetsoa ◽  
Musa S. D. Manzi ◽  
Mpofana Sihoyiya ◽  
Michael Westgate ◽  
Phumlani Kubeka ◽  
...  

We demonstrate the application of seismic methods using in-mine infrastructure such as exploration tunnels to image platinum deposits and geologic structures using different acquisition configurations. In 2020, seismic experiments were conducted underground at the Maseve platinum mine in the Bushveld Complex of South Africa. These seismic experiments were part of the Advanced Orebody Knowledge project titled “Developing technologies that will be used to obtain information ahead of the mine face.” In these experiments, we recorded active and passive seismic data using surface nodal arrays and an in-mine seismic land streamer. We focus on analyzing only the in-mine active seismic portion of the survey. The tunnel seismic survey consisted of seven 2D profiles in exploration tunnels, located approximately 550 m below ground surface and a few meters above known platinum deposits. A careful data-processing approach was adopted to enhance high-quality reflections and suppress infrastructure-generated noise. Despite challenges presented by the in-mine noisy environment, we successfully imaged the platinum deposits with the aid of borehole data and geologic models. The results open opportunities to adapt surface-based geophysical instruments to address challenging in-mine environments for mineral exploration.


Sign in / Sign up

Export Citation Format

Share Document