2D Tomographic velocity model building in tilted transversely isotropic media

2009 ◽  
Author(s):  
Fan Jiang ◽  
Hua‐wei Zhou ◽  
Zhi‐hui Zou ◽  
Hui Liu
Keyword(s):  
Model Building ◽  
Transversely Isotropic ◽  
Velocity Model ◽  
Velocity Model Building ◽  
Transversely Isotropic Media ◽  
Isotropic Media

scholarly journals A transversely isotropic medium with a tilted symmetry axis normal to the reflector

Geophysics ◽  
2010 ◽  
Vol 75 (3) ◽  
pp. A19-A24 ◽  
Author(s):  
Tariq Alkhalifah ◽  
Paul Sava
Keyword(s):  
Closed Form ◽  
Model Building ◽  
Incidence Angle ◽  
Transversely Isotropic ◽  
Velocity Model ◽  
Reflection Angle ◽  
Velocity Model Building ◽  
Transversely Isotropic Media ◽  
Isotropic Media ◽  
Zero Offset

The computational tools for imaging in transversely isotropic media with tilted axes of symmetry (TTI) are complex and in most cases do not have an explicit closed-form representation. Developing such tools for a TTI medium with tilt constrained to be normal to the reflector dip (DTI) reduces their complexity and allows for closed-form representations. The homogeneous-case zero-offset migration in such a medium can be performed using an isotropic operator scaled by the velocity of the medium in the tilt direction. For the nonzero-offset case, the reflection angle is always equal to the incidence angle, and thus, the velocities for the source and receiver waves at the reflection point are equal and explicitly dependent on the reflection angle. This fact allows for the development of explicit representations for angle decomposition as well as moveout formulas for analysis of extended images obtained by wave-equation migration. Although setting the tilt normal to the reflector dip may not be valid everywhere (i.e., on salt flanks), it can be used in the process of velocity model building, in which such constrains are useful and typically are used.

Correction for the influence of velocity lenses on nonhyperbolic moveout inversion for VTI media

Geophysics ◽  
2011 ◽  
Vol 76 (3) ◽  
pp. WA13-WA21 ◽  
Author(s):  
Mamoru Takanashi ◽  
Ilya Tsvankin
Keyword(s):  
Model Building ◽  
Incidence Angle ◽  
Transversely Isotropic ◽  
Velocity Model ◽  
Low Velocity ◽  
Anisotropic Parameter ◽  
Velocity Model Building ◽  
Offset Time ◽  
Zero Offset ◽  
Push Down

Nonhyperbolic moveout analysis plays an increasingly important role in velocity model building because it provides valuable information for anisotropic parameter estimation. However, lateral heterogeneity associated with stratigraphic lenses such as channels and reefs can significantly distort the moveout parameters, even when the structure is relatively simple. We analyze the influence of a low-velocity isotropic lens on nonhyperbolic moveout inversion for horizontally layered VTI (transversely isotropic with a vertical symmetry axis) models. Synthetic tests demonstrate that a lens can cause substantial, laterally varying errors in the normal-moveout velocity [Formula: see text] and the anellipticity parameter [Formula: see text]. The area influenced by the lens can be identified using the residual moveout after the nonhyperbolic moveout correction as well as the dependence of errors in [Formula: see text] and [Formula: see text] on spreadlength. To remove such errors in [Formula: see text] and [Formula: see text], we propose a correction algorithm designed for a lens embedded in a horizontally layered overburden. This algorithm involves estimation of the incidence angle of the ray passing through the lens for each recorded trace. With the assumption that lens-related perturbation of the raypath is negligible, the lens-induced traveltime shifts are computed from the corresponding zero-offset time distortion (i.e., from “pull-up” or “push-down” anomalies). Synthetic tests demonstrate that this algorithm substantially reduces the errors in the effective and interval parameters [Formula: see text] and [Formula: see text]. The corrected traces and reconstructed “background” values of [Formula: see text] and [Formula: see text] are suitable for anisotropic time imaging and producing a high-quality stack.

Oriented NMO correction of VTI data in the absence of near-offset traces

Geophysics ◽  
2021 ◽  
pp. 1-41
Author(s):  
Ali Raeisdana ◽  
M. Javad Khoshnavaz ◽  
Hamid Reza Siahkoohi
Keyword(s):  
Model Building ◽  
Seismic Velocity ◽  
Imaging Techniques ◽  
Velocity Model ◽  
The Past ◽  
Velocity Model Building ◽  
Isotropic Media ◽  
Nmo Correction ◽  
Transverse Isotropic ◽  
Normal Moveout Correction

Calculating an accurate seismic velocity model serves an important role in many seismic imaging techniques. The process of velocity model building is often time-consuming, specifically for anisotropic areas, where more than a single parameter is involved in the process. In the past few years, more time-efficient approaches have been considered to estimate seismic velocity as well as anellipticity parameters or heterogeneity factor using local event slopes. Nevertheless, some of these techniques are not practical due to curvature-dependency, or due to the lack of near-offset data. To address such limitations, we use a curvature-independent approach for normal-moveout correction as well as parameter estimation in vertical transverse isotropic media, which is based on local estimation of vertical traveltime using a shifted hyperbola approximation in the absence of near-offset data. The performance of the proposed approach is tested on synthetic and field common-midpoint gathers. It is also assessed in different signal-to-noise ratios and different missing-near-offset situations. Our findings are consistent with the results achieved by the previous methods that were not developed for sparse data.

scholarly journals Migration Using a Transversely Isotropic Medium with Symmetry Normal to the Reflector Dip

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Tariq Alkhalifah ◽  
Paul Sava
Keyword(s):  
Model Building ◽  
Symmetry Axis ◽  
Synthetic Data ◽  
Transversely Isotropic ◽  
Velocity Model ◽  
Downward Continuation ◽  
Velocity Model Building ◽  
Lateral Inhomogeneity ◽  
Velocity Information ◽  
Model Phase

A transversely isotropic (TI) model in which the tilt is constrained to be normal to the dip (DTI model) allows for simplifications in the imaging and velocity model building efforts as compared to a general TI (TTI) model. Although this model cannot be represented physically in all situations, for example, in the case of conflicting dips, it handles arbitrary reflector orientations under the assumption of symmetry axis normal to the dip. Using this assumption, we obtain efficient downward continuation algorithms compared to the general TTI ones, by utilizing the reflection features of such a model. Phase-shift migration can be easily extended to approximately handle lateral inhomogeneity using, for example, the split-step approach. This is possible because, unlike the general TTI case, the DTI model reduces to VTI for zero dip. These features enable a process in which we can extract velocity information by including tools that expose inaccuracies in the velocity model in the downward continuation process. We test this model on synthetic data corresponding to a general TTI medium and show its resilience.

Reverse time migration in tilted transversely isotropic media

2020 ◽  
Vol 38 (2) ◽  
Author(s):  
Razec Cezar Sampaio Pinto da Silva Torres ◽  
Leandro Di Bartolo
Keyword(s):  
Seismic Anisotropy ◽  
Synthetic Data ◽  
Transversely Isotropic ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Computer Clusters ◽  
Time Migration ◽  
Transversely Isotropic Media ◽  
Isotropic Media ◽  
Tti Media

ABSTRACT. Reverse time migration (RTM) is one of the most powerful methods used to generate images of the subsurface. The RTM was proposed in the early 1980s, but only recently it has been routinely used in exploratory projects involving complex geology – Brazilian pre-salt, for example. Because the method uses the two-way wave equation, RTM is able to correctly image any kind of geological environment (simple or complex), including those with anisotropy. On the other hand, RTM is computationally expensive and requires the use of computer clusters. This paper proposes to investigate the influence of anisotropy on seismic imaging through the application of RTM for tilted transversely isotropic (TTI) media in pre-stack synthetic data. This work presents in detail how to implement RTM for TTI media, addressing the main issues and specific details, e.g., the computational resources required. A couple of simple models results are presented, including the application to a BP TTI 2007 benchmark model.Keywords: finite differences, wave numerical modeling, seismic anisotropy. Migração reversa no tempo em meios transversalmente isotrópicos inclinadosRESUMO. A migração reversa no tempo (RTM) é um dos mais poderosos métodos utilizados para gerar imagens da subsuperfície. A RTM foi proposta no início da década de 80, mas apenas recentemente tem sido rotineiramente utilizada em projetos exploratórios envolvendo geologia complexa, em especial no pré-sal brasileiro. Por ser um método que utiliza a equação completa da onda, qualquer configuração do meio geológico pode ser corretamente tratada, em especial na presença de anisotropia. Por outro lado, a RTM é dispendiosa computacionalmente e requer o uso de clusters de computadores por parte da indústria. Este artigo apresenta em detalhes uma implementação da RTM para meios transversalmente isotrópicos inclinados (TTI), abordando as principais dificuldades na sua implementação, além dos recursos computacionais exigidos. O algoritmo desenvolvido é aplicado a casos simples e a um benchmark padrão, conhecido como BP TTI 2007.Palavras-chave: diferenças finitas, modelagem numérica de ondas, anisotropia sísmica.

Variation of stacking velocity in transversely isotropic media

1995 ◽  
Vol 26 (2-3) ◽  
pp. 431-436 ◽  
Author(s):  
Patrick N.(Jr). Okoye ◽  
N. F. Uren ◽  
W. Waluyo
Keyword(s):  
Transversely Isotropic ◽  
Transversely Isotropic Media ◽  
Isotropic Media

Elastic Least-Squares Imaging in Tilted Transversely Isotropic Media for Multicomponent Land and Pressure Marine Data

2020 ◽  
Vol 41 (4) ◽  
pp. 805-833 ◽  
Author(s):  
Jidong Yang ◽  
Biaolong Hua ◽  
Paul Williamson ◽  
Hejun Zhu ◽  
George McMechan ◽  
...  
Keyword(s):  
Least Squares ◽  
Transversely Isotropic ◽  
Transversely Isotropic Media ◽  
Isotropic Media ◽  
Marine Data
Sign in / Sign up

Export Citation Format

Share Document