Recent applications of turning-ray tomography

Geophysics ◽  
2008 ◽  
Vol 73 (5) ◽  
pp. VE243-VE254 ◽  
Author(s):  
Xianhuai Zhu ◽  
Paul Valasek ◽  
Baishali Roy ◽  
Simon Shaw ◽  
Jack Howell ◽  
...  
Keyword(s):  
Reservoir Characterization ◽  
Velocity Model ◽  
Surface Velocity ◽  
Seismic Survey ◽  
Structural Imaging ◽  
Prestack Depth Migration ◽  
Near Surface ◽  
Depth Migration ◽  
Time Migration ◽  
Prestack Time Migration

Recent applications of 2D and 3D turning-ray tomography show that near-surface velocities are important for structural imaging and reservoir characterization. For structural imaging, we used turning-ray tomography to estimate the near-surface velocities for static corrections followed by prestack time migration and the near-surface velocities for prestack depth migration. Two-dimensional acoustic finite-difference modeling illustrates that wave-equation prestack depth migration is very sensitive to the near-surface velocities. Field data demonstrate that turning-ray tomography followed by prestack time migration helps to produce superior images in complex geologic settings. When the near-surface velocity model is integrated into a background velocity model for prestack depth migration, we find that wave propagation is very sensitive to the velocities immediately below the topography. For shallow-reservoir characterization, we developed and applied azimuthal turning-ray tomography to investigate observed apparent azimuthal-traveltime variations, using a wide-azimuth land seismic survey from a heavy-oil field at Surmont, Canada. We found that the apparent azimuthal velocity variations are not necessarily related to azimuthal anisotropy, or horizontal transverse isotropy (HTI), induced by the stress field or fractures. Near-surface heterogeneity and the acquisition footprint also could result in apparent azimuthal variations.

Overthrust imaging with tomo‐datuming: A case study

Geophysics ◽  
1998 ◽  
Vol 63 (1) ◽  
pp. 25-38 ◽  
Author(s):  
Xianhuai Zhu ◽  
Burke G. Angstman ◽  
David P. Sixta
Keyword(s):  
Velocity Model ◽  
Surface Velocity ◽  
Time Shift ◽  
Lateral Velocity ◽  
Prestack Depth Migration ◽  
Near Surface ◽  
Depth Migration ◽  
Static Corrections ◽  
Velocity Variations ◽  
Kirchhoff Method

Through the use of iterative turning‐ray tomography followed by wave‐equation datuming (or tomo‐datuming) and prestack depth migration, we generate accurate prestack images of seismic data in overthrust areas containing both highly variable near‐surface velocities and rough topography. In tomo‐datuming, we downward continue shot records from the topography to a horizontal datum using velocities estimated from tomography. Turning‐ray tomography often provides a more accurate near‐surface velocity model than that from refraction statics. The main advantage of tomo‐datuming over tomo‐statics (tomography plus static corrections) or refraction statics is that instead of applying a vertical time‐shift to the data, tomo‐datuming propagates the recorded wavefield to the new datum. We find that tomo‐datuming better reconstructs diffractions and reflections, subsequently providing better images after migration. In the datuming process, we use a recursive finite‐difference (FD) scheme to extrapolate wavefield without applying the imaging condition, such that lateral velocity variations can be handled properly and approximations in traveltime calculations associated with the raypath distortions near the surface for migration are avoided. We follow the downward continuation step with a conventional Kirchhoff prestack depth migration. This results in better images than those migrated from the topography using the conventional Kirchhoff method with traveltime calculation in the complicated near surface. Since FD datuming is only applied to the shallow part of the section, its cost is much less than the whole volume FD migration. This is attractive because (1) prestack depth migration usually is used iteratively to build a velocity model, so both efficiency and accuracy are important factors to be considered; and (2) tomo‐datuming can improve the signal‐to‐noise (S/N) ratio of prestack gathers, leading to more accurate migration velocity analysis and better images after depth migration. Case studies with synthetic and field data examples show that tomo‐datuming is especially helpful when strong lateral velocity variations are present below the topography.

Seismic imaging and velocity analysis for an Alberta Foothills seismic survey

Geophysics ◽  
2001 ◽  
Vol 66 (3) ◽  
pp. 721-732 ◽  
Author(s):  
Lanlan Yan ◽  
Larry R. Lines
Keyword(s):  
Seismic Imaging ◽  
Migration Velocity ◽  
Surface Velocity ◽  
Seismic Survey ◽  
Velocity Analysis ◽  
Prestack Depth Migration ◽  
Near Surface ◽  
Depth Migration ◽  
Migration Velocity Analysis ◽  
Imaging Results

Seismic imaging of complex structures from the western Canadian Foothills can be achieved by applying the closely coupled processes of velocity analysis and depth migration. For the purposes of defining these structures in the Shaw Basing area of western Alberta, we performed a series of tests on both synthetic and real data to find optimum imaging procedures for handling large topographic relief, near‐surface velocity variations, and the complex structural geology of steeply dipping formations. To better understand the seismic processing problems, we constructed a typical foothills geological model that included thrust faults and duplex structures, computed the model responses, and then compared the performance of different migration algorithms, including the explicit finite difference (f-x) and Kirchhoff integral methods. When the correct velocity was used in the migration tests, the f-x method was the most effective in migration from topography. In cases where the velocity model was not assumed known, we determined a macrovelocity model by performing migration/velocity analysis by using smiles and frowns in common image gathers and by using depth‐focusing analysis. In applying depth imaging to the seismic survey from the Shaw Basing area, we found that imaging problems were caused partly by near‐surface velocity problems, which were not anticipated in the modeling study. Several comparisons of different migration approaches for these data indicated that prestack depth migration from topography provided the best imaging results when near‐surface velocity information was incorporated. Through iterative and interpretive migration/velocity analysis, we built a macrovelocity model for the final prestack depth migration.

Hybrid migration: A cost‐effective 3-D depth‐imaging technique

Geophysics ◽  
1997 ◽  
Vol 62 (2) ◽  
pp. 568-576 ◽  
Author(s):  
Young C. Kim ◽  
Worth B. Hurt, ◽  
Louis J. Maher ◽  
Patrick J. Starich
Keyword(s):  
Model Building ◽  
Cost Effective ◽  
Velocity Model ◽  
Depth Image ◽  
Hybrid Technique ◽  
Prestack Depth Migration ◽  
Depth Imaging ◽  
Depth Migration ◽  
Time Migration ◽  
Prestack Time Migration

The transformation of surface seismic data into a subsurface image can be separated into two components—focusing and positioning. Focusing is associated with ensuring the data from different offsets are contributing constructively to the same event. Positioning involves the transformation of the focused events into a depth image consistent with a given velocity model. In prestack depth migration, both of these operations are achieved simultaneously; however, for 3-D data, the cost is significant. Prestack time migration is much more economical and focuses events well even in the presence of moderate velocity variations, but suffers from mispositioning problems. Hybrid migration is a cost‐effective depth‐imaging approach that uses prestack time migration for focusing; inverse migration for the removal of positioning errors; and poststack depth migration for proper positioning. When lateral velocity changes are moderate, the hybrid technique can generate a depth image that is consistent with a velocity field. For very complex structures that require prestack depth migration, the results of the hybrid technique can be used to create a starting velocity model, thereby reducing the number of iterations for velocity model building.

Novel strategies for complex foothills seismic imaging — Part 1: Mega-near-surface velocity estimation

2020 ◽  
Vol 8 (3) ◽  
pp. T651-T665
Author(s):  
Yalin Li ◽  
Xianhuai Zhu ◽  
Gengxin Peng ◽  
Liansheng Liu ◽  
Wensheng Duan
Keyword(s):  
Seismic Imaging ◽  
Velocity Model ◽  
Velocity Estimation ◽  
Innovative Approach ◽  
Surface Velocity ◽  
Near Surface ◽  
Depth Migration ◽  
Static Corrections ◽  
Over Time

Seismic imaging in foothills areas is challenging because of the complexity of the near-surface and subsurface structures. Single seismic surveys often are not adequate in a foothill-exploration area, and multiple phases with different acquisition designs within the same block are required over time to get desired sampling in space and azimuths for optimizing noise attenuation, velocity estimation, and migration. This is partly because of economic concerns, and it is partly because technology is progressing over time, creating the need for unified criteria in processing workflows and parameters at different blocks in a study area. Each block is defined as a function of not only location but also the acquisition and processing phase. An innovative idea for complex foothills seismic imaging is presented to solve a matrix of blocks and tasks. For each task, such as near-surface velocity estimation and static corrections, signal processing, prestack time migration, velocity-model building, and prestack depth migration, one or two best service companies are selected to work on all blocks. We have implemented streamlined processing efficiently so that Task-1 to Task-n progressed with good coordination. Application of this innovative approach to a mega-project containing 16 3D surveys covering more than [Formula: see text] in the Kelasu foothills, northwestern China, has demonstrated that this innovative approach is a current best practice in complex foothills imaging. To date, this is the largest foothills imaging project in the world. The case study in Kelasu successfully has delivered near-surface velocity models using first arrivals picked up to 3500 m offset for static corrections and 9000 m offset for prestack depth migration from topography. Most importantly, the present megaproject is a merge of several 3D surveys, with the merge performed in a coordinated, systematic fashion in contrast to most land megaprojects. The benefits of this approach and the strategies used in processing data from the various subsurveys are significant. The main achievement from the case study is that the depth images, after the application of the near-surface velocity model estimated from the megasurveys, are more continuous and geologically plausible, leading to more accurate seismic interpretation.

Migration from 3D irregular surfaces: A prestack time migration approach

Geophysics ◽  
2012 ◽  
Vol 77 (5) ◽  
pp. S117-S129 ◽  
Author(s):  
Jianfeng Zhang ◽  
Jincheng Xu ◽  
Hao Zhang
Keyword(s):  
Wave Propagation ◽  
Computational Cost ◽  
Surface Velocity ◽  
Detailed Knowledge ◽  
Near Surface ◽  
Effective Velocity ◽  
Time Migration ◽  
Imaging Results ◽  
Static Corrections ◽  
Prestack Time Migration

We have developed a modified 3D prestack time migration (PSTM) scheme that can handle rugged topography as well as high near-surface velocities in land seismic imaging. The proposed topography PSTM can be applied to seismic data recorded on a 3D irregular surface without static corrections. Two effective velocity parameters were found to describe wave propagation through inhomogeneous media above and below a chosen datum. As a result, wave propagation phenomena in the complex near surface, such as near-vertical incidences through a weathering layer and raypaths bending away from vertical in the presence of high near-surface velocities, are correctly considered. The two effective velocity parameters can be estimated by flattening events in imaging gathers. Hence, it is not necessary to have detailed knowledge of the near-surface velocity model and velocity field below the datum when applying topography PSTM. We integrated residual static corrections into topography PSTM. This eliminated the distortions along the events better than conventional residual static corrections, which are usually applied before migration. The computational cost of the topography PSTM was only slightly higher than that of conventional PSTM due to the use of a table-driven algorithm. Three-dimensional synthetic and field data sets were used to test the proposed topography PSTM. High-quality imaging results were obtained.

scholarly journals 2D Seismic Imaging Improvement through Prestack Depth Migration (PSDM) Method

2019 ◽  
Vol 30 (1) ◽  
pp. 23-26
Author(s):  
Iyod Suherman ◽  
Taufan Wiguna ◽  
Rahadian Rahadian ◽  
Djunaedi Muljawan ◽  
Omar Moefti
Keyword(s):  
Seismic Imaging ◽  
Geological Structure ◽  
Prestack Depth Migration ◽  
Depth Migration ◽  
Velocity Modeling ◽  
Interval Velocity ◽  
Time Migration ◽  
Prestack Time Migration ◽  
Seismic Reflector

The quality of seismic is important for interpretation. Prestack Depth Migration produce better quality of seismic imaging. The seismic generated through PSDM method has better seismic reflector and geological structure appearance compared to Prestack Time Migration (PSTM) method. Accurate interval velocity modeling is a key in PSDM process, involving dix transformation, coherency inversion, and tomography. Comparison between PSTM and PSDM show that PSDM offer better imaging for interpretation because PSDM has better seismic reflector continuity and good geological appearance.

Scattering effect on shallow gas-obscured zone imaging in Bohai PL19-3 area

Geophysics ◽  
2012 ◽  
Vol 77 (2) ◽  
pp. B43-B53 ◽  
Author(s):  
Xianhuai Zhu ◽  
Kirk Wallace ◽  
Qingrong Zhu ◽  
Robert Hofer
Keyword(s):  
Velocity Model ◽  
Data Depth ◽  
Surface Velocity ◽  
Bohai Bay ◽  
Shallow Gas ◽  
Near Surface ◽  
Depth Migration ◽  
Precise Knowledge ◽  
Streamer Data ◽  
Viscoelastic Modeling

Seismic imaging is challenging in the Bohai Bay PL19-3 area, offshore China. Bohai Bay Field is seismically obscured, making well penetrations the only reliable source of data for subsurface interpretation. With the help of turning-ray tomography, we are able to obtain a reliable near-surface velocity model approximately down to 700 m below sea level, using the first arrivals picked from streamer data. Depth migration using velocities estimated from turning-ray tomography has improved shallow structures and fault definition. However, reservoir level structures from 800 to 1500 m are still poorly imaged. A viscoelastic modeling study with assigned variable Q and shallow velocity profiles, with and without shallow gas-induced scatterers, demonstrates that scattering is the primary controlling phenomenon causing imaging difficulty within the obscured zone. Due to scattering, imaging tests at the target level were unsuccessful even with precise knowledge of velocity.

Tomographic velocity analysis and wave-equation depth migration in an overthrust terrain: A case study from the Tuha Basin, China

2018 ◽  
Vol 6 (1) ◽  
pp. T1-T13
Author(s):  
Bin Lyu ◽  
Qin Su ◽  
Kurt J. Marfurt
Keyword(s):  
Wave Equation ◽  
Data Quality ◽  
Model Building ◽  
Velocity Model ◽  
Lateral Velocity ◽  
Near Surface ◽  
Depth Migration ◽  
Time Migration ◽  
Head Waves ◽  
Velocity Variations

Although the structures associated with overthrust terrains form important targets in many basins, accurately imaging remains challenging. Steep dips and strong lateral velocity variations associated with these complex structures require prestack depth migration instead of simpler time migration. The associated rough topography, coupled with older, more indurated, and thus high-velocity rocks near or outcropping at the surface often lead to seismic data that suffer from severe statics problems, strong head waves, and backscattered energy from the shallow section, giving rise to a low signal-to-noise ratio that increases the difficulties in building an accurate velocity model for subsequent depth migration. We applied a multidomain cascaded noise attenuation workflow to suppress much of the linear noise. Strong lateral velocity variations occur not only at depth but near the surface as well, distorting the reflections and degrading all deeper images. Conventional elevation corrections followed by refraction statics methods fail in these areas due to poor data quality and the absence of a continuous refracting surface. Although a seismically derived tomographic solution provides an improved image, constraining the solution to the near-surface depth-domain interval velocities measured along the surface outcrop data provides further improvement. Although a one-way wave-equation migration algorithm accounts for the strong lateral velocity variations and complicated structures at depth, modifying the algorithm to account for lateral variation in illumination caused by the irregular topography significantly improves the image, preserving the subsurface amplitude variations. We believe that our step-by-step workflow of addressing the data quality, velocity model building, and seismic imaging developed for the Tuha Basin of China can be applied to other overthrust plays in other parts of the world.

Sign in / Sign up

Export Citation Format

Share Document