Seismic monitoring of in‐situ combustion in the Balol heavy‐oil field

2007 ◽  
Author(s):  
Hossein Mehdi Zadeh ◽  
Ravi Prakash Srivastava ◽  
Nimisha Vedanti ◽  
Martin Landrø
Keyword(s):  
Heavy Oil ◽  
Seismic Monitoring ◽  
Oil Field ◽  
In Situ Combustion

Application and Exploration of Early In-Situ Combustion Huff-and-Puff Technology in a Deep Undisturbed Reservoir with Extra Heavy Oil

2021 ◽  
pp. 1-13
Author(s):  
Wang Xiaoyan ◽  
Zhao Jian ◽  
Yin Qingguo ◽  
Cao Bao ◽  
Zhang Yang ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Heavy Oil ◽  
Gas Injection ◽  
Thermal Recovery ◽  
Oil Field ◽  
Pilot Test ◽  
In Situ Combustion ◽  
Coiled Tubing

Summary Achieving effective results using conventional thermal recovery technology is challenging in the deep undisturbed reservoir with extra-heavy oil in the LKQ oil field. Therefore, in this study, a novel approach based on in-situ combustion huff-and-puff technology is proposed. Through physical and numerical simulations of the reservoir, the oil recovery mechanism and key injection and production parameters of early-stage ultraheavy oil were investigated, and a series of key engineering supporting technologies were developed that were confirmed to be feasible via a pilot test. The results revealed that the ultraheavy oil in the LKQ oil field could achieve oxidation combustion under a high ignition temperature of greater than 450°C, where in-situ cracking and upgrading could occur, leading to greatly decreased viscosity of ultraheavy oil and significantly improved mobility. Moreover, it could achieve higher extra-heavy-oil production combined with the energy supplement of flue gas injection. The reasonable cycles of in-situ combustion huff and puff were five cycles, with the first cycle of gas injection of 300 000 m3 and the gas injection volume per cycle increasing in turn. It was predicted that the incremental oil production of a single well would be 500 t in one cycle. In addition, the supporting technologies were developed, such as a coiled-tubing electric ignition system, an integrated temperature and pressure monitoring system in coiled tubing, anticorrosion cementing and completion technology with high-temperature and high-pressure thermal recovery, and anticorrosion injection-production integrated lifting technology. The proposed method was applied to a pilot test in the YS3 well in the LKQ oil field. The high-pressure ignition was achieved in the 2200-m-deep well using the coiled-tubing electric igniter. The maximum temperature tolerance of the integrated monitoring system in coiled tubing reached up to 1200°C, which provided the functions of distributed temperature and multipoint pressure measurement in the entire wellbore. The combination of 13Cr-P110 casing and titanium alloy tubing effectively reduced the high-temperature and high-pressure oxygen corrosion of the wellbore. The successful field test of the comprehensive supporting engineering technologies presents a new approach for effective production in deep extra-heavy-oil reservoirs.

Modeling In-Situ Combustion in a Heavy Oil Field in Romania

2013 ◽  
Author(s):  
Andrew Priestley ◽  
Jorge Alejandro Ruiz ◽  
Paul F Naccache ◽  
Guenther Glatz ◽  
Virgil Crecana
Keyword(s):  
Heavy Oil ◽  
Oil Field ◽  
In Situ Combustion

Canadian Operator Works To Transform an Oil Field Into a Hydrogen Factory

2021 ◽  
Vol 73 (03) ◽  
pp. 38-40
Author(s):  
Trent Jacobs
Keyword(s):  
Hydrogen Production ◽  
Heavy Oil ◽  
Oil And Gas ◽  
Hydrogen Generation ◽  
Combustion Process ◽  
Oil And Gas Industry ◽  
Oil Field ◽  
In Situ Combustion ◽  
Associated Gas

As the oil and gas industry scans the known universe for ways to diversify its portfolio with alternative forms of energy, it might want to look under its own feet, too. For inside every oil reservoir, there may be a hydrogen reservoir just waiting to get out. The concept comes courtesy of Calgary-based Proton Technologies. Founded in 2015, the young firm is the operator of an aging heavy oil field in Saskatchewan. There, on a small patch of flat farm-land, Proton has been producing oil to pay the bills. At the same time, it has been experimenting with injecting oxygen into its reservoir in a bid to produce exclusively hydrogen. Proton says its process is built on a technical foundation that includes years of research and works at the demonstration scale. Soon, the firm hopes to prove it is also profitable. While it produces its own hydrogen, Proton is licensing out the technology to others. In January, fellow Canadian operator Whitecap Resources secured a hydrogen production license of up to 500 metric tons/day from Proton. Whitecap produces about 48,000 B/D, and thanks to carbon sequestration, the operator has claimed a net negative emissions status since 2018. Proton says it has struck similar licensing deals with other Canadian operators but that these companies have not yet made public announcements. Where these projects go from here may end up representing the ultimate test for Proton’s innovative twist on the in-situ combustion process known so well to the heavy-oil sector. “In-situ combustion has been used in more than 500 projects worldwide over the last century. And, they have all produced hydrogen,” said Grant Strem, a cofounder and the CEO of Proton. Strem is a petroleum geologist by back-ground who spent the majority of his career working on heavy-oil projects for Canadian producers and research analysis with the banks that fund the upstream sector. While his new venture remains registered as an oil company, the self-described explorationist has come to look at oil fields very differently than he used to. “In an oil field, you have oil—hydrocarbons, which are made of hydrogen and carbon. The other fluid down there is H2O. So, an oil field is really a giant hydrogen-rich, energy-dense system that’s all conveniently accessible by wells,” Strem explained. But, in those past examples, the hundreds of other in-situ combustion projects, hydrogen production was merely a byproduct, an associated gas of sorts. It was the result of several reactions generated by air injections that producers use an oxidizer to heat up the heavy oil and get it flowing. What Proton wants to do is to super-charge the hydrogen-generating reactions by using the oil as fuel while leaving the carbon where it is. That ambition includes doing so at a price point that is roughly five times below that of Canadian natural gas prices and an even smaller fraction of what other hydrogen-generation methods cost.

scholarly journals Half a century of continuous oil production by in-situ combustion in Romania – case study Suplacu de Barcau field

2021 ◽  
Vol 343 ◽  
pp. 09009
Author(s):  
Gheorghe Branoiu ◽  
Florinel Dinu ◽  
Maria Stoicescu ◽  
Iuliana Ghetiu ◽  
Doru Stoianovici
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Oil Production ◽  
Oil Field ◽  
Oil Reservoir ◽  
In Situ Combustion ◽  
Cyclic Steam Stimulation ◽  
The Impact ◽  
Steam Stimulation

Thermal oil recovery is a special technique belonging to Enhanced Oil Recovery (EOR) methods and includes steam flooding, cyclic steam stimulation, and in-situ combustion (fire flooding) applied especially in the heavy oil reservoirs. Starting 1970 in-situ combustion (ISC) process has been successfully applied continuously in the Suplacu de Barcau oil field, currently this one representing the most important reservoir operated by ISC in the world. Suplacu de Barcau field is a shallow clastic Pliocene, heavy oil reservoir, located in the North-Western Romania and geologically belonging to Eastern Pannonian Basin. The ISC process are operated using a linear combustion front propagated downstructure. The maximum oil production was recorded in 1985 when the total air injection rate has reached maximum values. Cyclic steam stimulation has been continuously applied as support for the ISC process and it had a significant contribution in the oil production rates. Nowadays the oil recovery factor it’s over 55 percent but significant potential has left. In the paper are presented the important moments in the life-time production of the oil field, such as production history, monitoring of the combustion process, technical challenges and their solving solutions, and scientific achievements revealed by many studies performed on the impact of the ISC process in the oil reservoir.

Field Scale In-Situ Combustion ISC Modelling of a Heavy Oil Field of Western Onshore, India

2019 ◽  
Author(s):  
Rakesh Kumar Meena ◽  
Ravi Shekhar Singh ◽  
Sandeep Kumar Upadhyay ◽  
Sujit Mitra
Keyword(s):  
Heavy Oil ◽  
Oil Field ◽  
Field Scale ◽  
In Situ Combustion

Extension of In-Situ Combustion Process from Pilot to Semi-Commercial Stage in Heavy Oil Field of Balol

1997 ◽  
Author(s):  
S. Roychaudhury ◽  
N.S. Rao ◽  
S.K. Sinha ◽  
S. Sur ◽  
K.K. Gupta ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Combustion Process ◽  
Oil Field ◽  
In Situ Combustion

Estimation of the Combustion Temperature Profile in a Romanian Oil Field

2018 ◽  
Vol 69 (10) ◽  
pp. 2669-2676
Author(s):  
Gheorghe Branoiu ◽  
Tudora Cristescu ◽  
Iulian Nistor
Keyword(s):  
Crude Oil ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Thermal Regime ◽  
Oil Field ◽  
In Situ Combustion ◽  
Wide Range ◽  
Heavy Crude ◽  
Thermal Oil

Developing and producing of the heavy crude oil involved significant economic and technological challenges. The oil industry ability to prospect and capitalize the huge world heavy oil resources both economically and environmentally friendly will be crucial in helping meet future energy needs. Thermal oil recovery is one of the three types of techniques belonging to Enhanced Oil Recovery. It is applied for increasing the cumulative of crude oil that can be produced in an oil field. One of the oldest thermal oil recovery is in-situ combustion or fireflooding applied for the first time about 100 years ago. Despite in-situ combustion has not found widespread acceptance among operators like other thermal processes (such as steam injection), analysis of the successful projects indicates that the process is applicable to a wide range of oil reservoirs, especially to heavy crude oils. An important monitoring parameter of thermal oil recovery process is represented by thermal regime especially in heavy oil fields in which a high-temperature regime must be occur as the in-situ combustion to be successful. In the paper the authors are using thermal analysis (thermogravimetric and thermodifferential analysis) for investigation of the thermal regime involved in the production process of an oil reservoir by in-situ combustion.

Sign in / Sign up

Export Citation Format

Share Document