scholarly journals Tensor deconvolution: A method to locate equivalent sources from full tensor gravity data

Geophysics ◽  
2007 ◽  
Vol 72 (5) ◽  
pp. I61-I69 ◽  
Author(s):  
Valentin Mikhailov ◽  
Gwendoline Pajot ◽  
Michel Diament ◽  
Antony Price
Keyword(s):  
Gravity Field ◽  
Gravity Data ◽  
Random Noise ◽  
Depth Estimation ◽  
Observation Point ◽  
Euler Deconvolution ◽  
Structural Index ◽  
Measuring Device ◽  
Equivalent Sources ◽  
Scalar Invariants

We present a method dedicated to the interpretation of full tensor (gravity) gradiometry (FTG) data called tensor deconvolution. It is especially designed to benefit from the simultaneous use of all the FTG components and of the gravity field. In particular, it uses tensor scalar invariants as a basis for source location. The invariant expressions involve all of the independent components of the tensor. This method is a tensor analog of Euler deconvolution, but has the following advantages compared to the conventional Euler deconvolution method: (1) It provides a solution at every observation point, without the use of a sliding window. (2) It determines the structural index automatically; as a consequence, the structural index follows the variations of the field morphology. (3) It uses all components of the measured full gradient tensor and gravity field, thus reducing errors caused by random noise. It is based on scalar invariants that are by nature insensitive to the orientation of the measuring device. We tested our method on both noise-free and noise-contaminated data. These tests show that tensor solutions cluster in the vicinity of the center of causative bodies, whereas Euler solutions better outline their edges. Hence, these methods should be combined for improved contouring and depth estimation. In addition, we use a clustering method to improve the selection of solutions, which proves advantageous when data are noisy or when signals from close causative bodies interfere.

Weighted Euler deconvolution of gravity data

Geophysics ◽  
1998 ◽  
Vol 63 (5) ◽  
pp. 1595-1603 ◽  
Author(s):  
Pierre B. Keating
Keyword(s):  
Euler Equations ◽  
Gravity Data ◽  
Error Function ◽  
Bouguer Anomaly ◽  
Depth Estimation ◽  
Euler Deconvolution ◽  
Structural Index ◽  
Eastern Canada ◽  
Adequate Sampling

Euler deconvolution is used for rapid interpretation of magnetic and gravity data. It is particularly good at delineating contacts and rapid depth estimation. The quality of the depth estimation depends mostly on the choice of the proper structural index and adequate sampling of the data. The structural index is a function of the geometry of the causative bodies. For gravity surveys, station distribution is in general irregular, and the gravity field is aliased. This results in erroneous depth estimates. By weighting the Euler equations by an error function proportional to station accuracies and the interstation distance, it is possible to reject solutions resulting from aliasing of the field and less accurate measurements. The technique is demonstrated on Bouguer anomaly data from the Charlevoix region in eastern Canada.

scholarly journals Depth Estimation Using the Tilt Angle of Gravity Field due to the Semi-Infinite Vertical Cylindrical Source

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Ata Eshaghzadeh
Keyword(s):  
Tilt Angle ◽  
Gravity Data ◽  
Random Noise ◽  
Depth Estimation ◽  
Potential Fields ◽  
Source Depth ◽  
Euler Deconvolution ◽  
Deconvolution Technique ◽  
Cylindrical Source ◽  
Interpretation Method

Tilt angle filter is an interpretation method that is used to determine the source borders locations from potential fields data. Moreover, the tilt angle is applied for estimation of the anomaly source depth, such as contact-depth method and tilt-depth method. In this paper an application of the tilt angle technique obtained from the first vertical and horizontal gradients of the gravity anomaly from semi-infinite vertical cylindrical source is described. The technique is based on the tilt angle and derivatives ratio. In this approach the depth estimates are proportional to the computed tilt angles and their distances from the cross section center of the anomaly cause on the surface. This new method is termed the tilt-distance-depth (TDD). The method is demonstrated using synthetic gravity data, with and without random noise, and real gravity data from Iran. The results are also compared with the solutions from Euler deconvolution technique and inverse modelling using Modelvision software.

scholarly journals Estimation of Depth to Bouguer Anomaly Sources Using Euler Deconvolution Techniques

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Gideon Oluyinka Layade ◽  
Hazeez Edunjobi ◽  
Victor Makinde ◽  
Babatunde Bada
Keyword(s):  
Bouguer Anomaly ◽  
Depth Estimation ◽  
Hydrocarbon Exploration ◽  
Survey Method ◽  
Depth Range ◽  
Euler Deconvolution ◽  
Structural Index ◽  
Geological Information ◽  
Geophysical Measurement ◽  
Deconvolution Techniques

Abstract The geophysical measurement of variations in gravitational field of the Earth for a particular location is carried out through a gravity survey method. These variations termed anomalies can help investigate the subsurface of interest. An investigation was carried out using the airborne satellite-based (EGM08) gravity dataset to reveal the geological information inherent in a location. Qualitative analysis of the gravity dataset by filtering techniques of two-dimensional fast Fourier transform (FFT2D) shows that the area is made up of basement and sedimentary Formations. Further enhancements on the residual anomaly after separation show the sedimentary intrusion into the study area and zones of possible rock minerals of high and low density contrasts. Quantitative interpretations of the study area by 3-D Euler deconvolution depth estimation technique described the depth and locations of gravity bodies that yielded the gravity field. The result of the depth to basement approach was found to be in the depth range of 930 m to 2,686 m (for Structural Index, SI = 0). The research location is a probable area for economic mineral deposits and hydrocarbon exploration.

scholarly journals Gravity Analysis for Subsurface Characterization and Depth Estimation of Muda River Basin, Kedah, Peninsular Malaysia

2021 ◽  
Vol 11 (14) ◽  
pp. 6363
Author(s):  
Muhammad Noor Amin Zakariah ◽  
Norsyafina Roslan ◽  
Norasiah Sulaiman ◽  
Sean Cheong Heng Lee ◽  
Umar Hamzah ◽  
...  
Keyword(s):  
River Basin ◽  
Rock Type ◽  
Gravity Data ◽  
Power Spectral Analysis ◽  
Depth Estimation ◽  
Structural Features ◽  
Peninsular Malaysia ◽  
Gravity Survey ◽  
Basement Rock ◽  
Geophysical Techniques

Gravity survey is one of the passive geophysical techniques commonly used to delineate geological formations, especially in determining basement rock and the overlying deposit. Geologically, the study area is made up of thick quaternary alluvium deposited on top of the older basement rock. The Muda River basin constitutes, approximately, of more than 300 m of thick quaternary alluvium overlying the unknown basement rock type. Previous studies, including drilling and geo-electrical resistivity surveys, were conducted in the area but none of them managed to conclusively determine the basement rock type and depth precisely. Hence, a regional gravity survey was conducted to determine the thickness of the quaternary sediments prior to assessing the sustainability of the Muda River basin. Gravity readings were made at 347 gravity stations spaced at 3–5 km intervals using Scintrex CG-3 covering an area and a perimeter of 9000 km2 and 730 km, respectively. The gravity data were then conventionally reduced for drift, free air, latitude, Bouguer, and terrain corrections. These data were then consequently analyzed to generate Bouguer, regional and total horizontal derivative (THD) anomaly maps for qualitative and quantitative interpretations. The Bouguer gravity anomaly map shows low gravity values in the north-eastern part of the study area interpreted as representing the Main Range granitic body, while relatively higher gravity values observed in the south-western part are interpreted as representing sedimentary rocks of Semanggol and Mahang formations. Patterns observed in the THD anomaly and Euler deconvolution maps closely resembled the presence of structural features such as fault lineaments dominantly trending along NW-SE and NE-SW like the trends of topographic lineaments in the study area. Based on power spectral analysis of the gravity data, the average depth of shallow body, representing alluvium, and deep body, representing underlying rock formations, are 0.5 km and 1.2 km, respectively. The thickness of Quaternary sediment and the depth of sedimentary formation can be more precisely estimated by other geophysical techniques such as the seismic reflection survey.

scholarly journals New insights on the dynamics of the Sumatra and Mariana complexes inferred from the comparative analysis of gravity data and model predictions

2020 ◽  
Author(s):  
Arcangela Bollino ◽  
Anna Maria Marotta ◽  
Federica Restelli ◽  
Alessandro Regorda ◽  
Roberto Sabadini
Keyword(s):  
Comparative Analysis ◽  
Gravity Field ◽  
Wide Spectrum ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Phase Changes ◽  
Wide Range ◽  
Model Predictions ◽  
Dip Angle ◽  
The Masses

<p>Subduction is responsible for surface displacements and deep mass redistribution. This rearrangement generates density anomalies in a wide spectrum of wavelengths which, in turn, causes important anomalies in the Earth's gravity field that are visible as lineaments parallel to the arc-trench systems. In these areas, when the traditional analysis of the deformation and stress fields is combined with the analysis of the perturbation of the gravity field and its slow time variation, new information on the background environment controlling the tectonic loading phase can be disclosed.</p><p>Here we present the results of a comparative analysis between the geodetically retrieved gravitational anomalies, based on the EIGEN-6C4 model, and those predicted by a 2D thermo-chemical mechanical modeling of the Sumatra and Mariana complexes.</p><p>The 2D model accounts for a wide range of parameters, such as the convergence velocity, the shallow dip angle, the different degrees of coupling between the facing plates. The marker in cell technique is used to compositionally differentiate the system. Phase changes in the crust and in the mantle and mantle hydration are also allowed. To be compliant with the geodetic EIGEN-6C4 gravity data, we define a model normal Earth considering the vertical density distribution at the margins of the model domain, where the masses are not perturbed by the subduction process.</p><p>Model predictions are in good agreement with data, both in terms of wavelengths and magnitude of the gravity anomalies measured in the surroundings of the Sumatra and Marina subductions. Furthermore, our modeling supports that the differences in the style of the gravity anomaly observed in the two areas are attributable to the different environments – ocean-ocean or ocean-continental subduction – that drives a significantly different dynamic in the wedge area.</p>

scholarly journals Accuracy Analysis of Gravity Field Changes from Grace RL06 and RL05 Data Compared to in Situ Gravimetric Measurements in the Context of Choosing Optimal Filtering Type

2020 ◽  
Vol 55 (3) ◽  
pp. 100-117
Author(s):  
Viktor Szabó ◽  
Dorota Marjańska
Keyword(s):  
Gravity Field ◽  
Ocean Circulation ◽  
Gravity Data ◽  
The Other ◽  
Subsurface Water ◽  
Satellite Gravity ◽  
Absolute Gravimetry ◽  
The Earth ◽  
Gravity Measurements ◽  
Gravity Recovery

AbstractGlobal satellite gravity measurements provide unique information regarding gravity field distribution and its variability on the Earth. The main cause of gravity changes is the mass transportation within the Earth, appearing as, e.g. dynamic fluctuations in hydrology, glaciology, oceanology, meteorology and the lithosphere. This phenomenon has become more comprehensible thanks to the dedicated gravimetric missions such as Gravity Recovery and Climate Experiment (GRACE), Challenging Minisatellite Payload (CHAMP) and Gravity Field and Steady-State Ocean Circulation Explorer (GOCE). From among these missions, GRACE seems to be the most dominating source of gravity data, sharing a unique set of observations from over 15 years. The results of this experiment are often of interest to geodesists and geophysicists due to its high compatibility with the other methods of gravity measurements, especially absolute gravimetry. Direct validation of gravity field solutions is crucial as it can provide conclusions concerning forecasts of subsurface water changes. The aim of this work is to present the issue of selection of filtration parameters for monthly gravity field solutions in RL06 and RL05 releases and then to compare them to a time series of absolute gravimetric data conducted in quasi-monthly measurements in Astro-Geodetic Observatory in Józefosław (Poland). The other purpose of this study is to estimate the accuracy of GRACE temporal solutions in comparison with absolute terrestrial gravimetry data and making an attempt to indicate the significance of differences between solutions using various types of filtration (DDK, Gaussian) from selected research centres.

Sign in / Sign up

Export Citation Format

Share Document