scholarly journals Seismic processing in the inverse data space

Geophysics ◽  
2006 ◽  
Vol 71 (4) ◽  
pp. A29-A33 ◽  
Author(s):  
A. J. Berkhout
Keyword(s):  
Seismic Data ◽  
Dominant Role ◽  
Temporal Frequency ◽  
Data Matrix ◽  
Seismic Survey ◽  
Seismic Processing ◽  
Data Space ◽  
Matrix Formula ◽  
Multiple Elimination ◽  
Zero Time

Until now, seismic processing has been carried out by applying inverse filters in the forward data space. Because the acquired data of a seismic survey is always discrete, seismic measurements in the forward data space can be arranged conveniently in a data matrix [Formula: see text]. Each column in the data matrix represents one shot record. If we represent seismic data in the temporal frequency domain, then each matrix element consists of a complex-valued number. Considering the dominant role of multiple scattering in seismic data, it is proposed to replace data matrix [Formula: see text] by its inverse [Formula: see text] before starting seismic processing. Making use of the feedback model for seismic data, multiple scattered energy is mapped onto the zero time axis of the inverse data space. The practical consequence of this remarkable property may be significant: multiple elimination in the inverse data space simplifies to removing data at zero time only. Moving to the inverse data space may cause a fundamental change in the way we preprocess and image seismic data.

scholarly journals Image-space surface-related multiple prediction

Geophysics ◽  
2007 ◽  
Vol 72 (2) ◽  
pp. S113-S122 ◽  
Author(s):  
Brad Artman ◽  
Gabriel Alvarez ◽  
Ken Matson
Keyword(s):  
Seismic Data ◽  
Velocity Model ◽  
Image Space ◽  
Depth Level ◽  
Image Domain ◽  
Data Space ◽  
The Earth ◽  
Multiple Prediction ◽  
The Cost ◽  
Multiple Elimination

A very important aspect of removing multiples from seismic data is accurate prediction of their kinematics. We cast the multiple prediction problem as an operation in the image space parallel to the conventional surface-related multiple-prediction methodology. Though developed in the image domain, the technique shares the data-driven strengths of data-domain surface-related multiple elimination (SRME) by being independent of the earth (velocity) model. Also, the data are used to predict the multiples exactly so that a Radon transform need not be designed to separate the two types of events. The cost of the prediction is approximately the same as that of data-space methods, though it can be computed during the course of migration. The additional cost is not significant compared to that incurred by shot-profile migration, though split-spread gathers must be used. Image-space multiple predictions are generated by autoconvolving the traces in each shot-gather at every depth level during the course of a shot-profile migration. The prediction in the image domain is equivalent to that produced by migrating the data-space convolutional prediction. Adaptive subtraction of the prediction from the image is required. Subtraction in the image domain, however, provides the advantages of focused energy in a smaller domain since extrapolation removes some of the imperfections of the input data.

APPLICATION OF THE EMPIRICAL MODE DECOMPOSITION METHOD TO GROUND-ROLL NOISE ATTENUATION IN SEISMIC DATA

2013 ◽  
Vol 31 (4) ◽  
pp. 619 ◽  
Author(s):  
Luiz Eduardo Soares Ferreira ◽  
Milton José Porsani ◽  
Michelângelo G. Da Silva ◽  
Giovani Lopes Vasconcelos
Keyword(s):  
Empirical Mode Decomposition ◽  
Seismic Data ◽  
Low Frequency ◽  
High Amplitude ◽  
Seismic Line ◽  
Seismic Processing ◽  
Mode Decomposition ◽  
Ground Roll ◽  
Fortran 90 ◽  
Emd Method

ABSTRACT. Seismic processing aims to provide an adequate image of the subsurface geology. During seismic processing, the filtering of signals considered noise is of utmost importance. Among these signals is the surface rolling noise, better known as ground-roll. Ground-roll occurs mainly in land seismic data, masking reflections, and this roll has the following main features: high amplitude, low frequency and low speed. The attenuation of this noise is generally performed through so-called conventional methods using 1-D or 2-D frequency filters in the fk domain. This study uses the empirical mode decomposition (EMD) method for ground-roll attenuation. The EMD method was implemented in the programming language FORTRAN 90 and applied in the time and frequency domains. The application of this method to the processing of land seismic line 204-RL-247 in Tacutu Basin resulted in stacked seismic sections that were of similar or sometimes better quality compared with those obtained using the fk and high-pass filtering methods.Keywords: seismic processing, empirical mode decomposition, seismic data filtering, ground-roll. RESUMO. O processamento sísmico tem como principal objetivo fornecer uma imagem adequada da geologia da subsuperfície. Nas etapas do processamento sísmico a filtragem de sinais considerados como ruídos é de fundamental importância. Dentre esses ruídos encontramos o ruído de rolamento superficial, mais conhecido como ground-roll . O ground-roll ocorre principalmente em dados sísmicos terrestres, mascarando as reflexões e possui como principais características: alta amplitude, baixa frequência e baixa velocidade. A atenuação desse ruído é geralmente realizada através de métodos de filtragem ditos convencionais, que utilizam filtros de frequência 1D ou filtro 2D no domínio fk. Este trabalho utiliza o método de Decomposição em Modos Empíricos (DME) para a atenuação do ground-roll. O método DME foi implementado em linguagem de programação FORTRAN 90, e foi aplicado no domínio do tempo e da frequência. Sua aplicação no processamento da linha sísmica terrestre 204-RL-247 da Bacia do Tacutu gerou como resultados, seções sísmicas empilhadas de qualidade semelhante e por vezes melhor, quando comparadas as obtidas com os métodos de filtragem fk e passa-alta.Palavras-chave: processamento sísmico, decomposição em modos empíricos, filtragem dados sísmicos, atenuação do ground-roll.

LONG-PERIOD SURFACE-RELATED MULTIPLE SUPPRESSION IN 2D MARINE SEISMIC DATA USING PREDICTIVE DECONVOLUTION AND COMBINATION OF SURFACE-RELATED MULTIPLE ELIMINATION AND PARABOLIC RADON FILTERING

2021 ◽  
Author(s):  
Pimpawee Sittipan ◽  
Pisanu Wongpornchai
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Petroleum Reservoirs ◽  
The United States ◽  
Multiple Reflections ◽  
Long Period ◽  
Predictive Deconvolution ◽  
Short Period ◽  
Marine Seismic ◽  
Multiple Elimination

Some of the important petroleum reservoirs accumulate beneath the seas and oceans. Marine seismic reflection method is the most efficient method and is widely used in the petroleum industry to map and interpret the potential of petroleum reservoirs. Multiple reflections are a particular problem in marine seismic reflection investigation, as they often obscure the target reflectors in seismic profiles. Multiple reflections can be categorized by considering the shallowest interface on which the bounces take place into two types: internal multiples and surface-related multiples. Besides, the multiples can be categorized on the interfaces where the bounces take place, a difference between long-period and short-period multiples can be considered. The long-period surface-related multiples on 2D marine seismic data of the East Coast of the United States-Southern Atlantic Margin were focused on this research. The seismic profile demonstrates the effectiveness of the results from predictive deconvolution and the combination of surface-related multiple eliminations (SRME) and parabolic Radon filtering. First, predictive deconvolution applied on conventional processing is the method of multiple suppression. The other, SRME is a model-based and data-driven surface-related multiple elimination method which does not need any assumptions. And the last, parabolic Radon filtering is a moveout-based method for residual multiple reflections based on velocity discrimination between primary and multiple reflections, thus velocity model and normal-moveout correction are required for this method. The predictive deconvolution is ineffective for long-period surface-related multiple removals. However, the combination of SRME and parabolic Radon filtering can attenuate almost long-period surface-related multiple reflections and provide a high-quality seismic images of marine seismic data.

Seismic solutions utilizing existing in-mine infrastructure for mineral exploration: A case study from Maseve platinum mine, South Africa

2022 ◽  
Vol 41 (1) ◽  
pp. 54-61
Author(s):  
Moyagabo K. Rapetsoa ◽  
Musa S. D. Manzi ◽  
Mpofana Sihoyiya ◽  
Michael Westgate ◽  
Phumlani Kubeka ◽  
...  
Keyword(s):  
South Africa ◽  
Seismic Data ◽  
Mineral Exploration ◽  
Ground Surface ◽  
Seismic Survey ◽  
Noisy Environment ◽  
Borehole Data ◽  
Passive Seismic ◽  
Below Ground

We demonstrate the application of seismic methods using in-mine infrastructure such as exploration tunnels to image platinum deposits and geologic structures using different acquisition configurations. In 2020, seismic experiments were conducted underground at the Maseve platinum mine in the Bushveld Complex of South Africa. These seismic experiments were part of the Advanced Orebody Knowledge project titled “Developing technologies that will be used to obtain information ahead of the mine face.” In these experiments, we recorded active and passive seismic data using surface nodal arrays and an in-mine seismic land streamer. We focus on analyzing only the in-mine active seismic portion of the survey. The tunnel seismic survey consisted of seven 2D profiles in exploration tunnels, located approximately 550 m below ground surface and a few meters above known platinum deposits. A careful data-processing approach was adopted to enhance high-quality reflections and suppress infrastructure-generated noise. Despite challenges presented by the in-mine noisy environment, we successfully imaged the platinum deposits with the aid of borehole data and geologic models. The results open opportunities to adapt surface-based geophysical instruments to address challenging in-mine environments for mineral exploration.

Automatic blind deconvolution with Toeplitz-structured sparse total least squares

Geophysics ◽  
2018 ◽  
Vol 83 (6) ◽  
pp. V345-V357 ◽  
Author(s):  
Nasser Kazemi
Keyword(s):  
Least Squares ◽  
Cross Validation ◽  
Blind Deconvolution ◽  
Real Data ◽  
Total Least Squares ◽  
Data Matrix ◽  
Seismic Survey ◽  
Structural Constraints ◽  
Generalized Cross Validation ◽  
Free Data

Given the noise-corrupted seismic recordings, blind deconvolution simultaneously solves for the reflectivity series and the wavelet. Blind deconvolution can be formulated as a fully perturbed linear regression model and solved by the total least-squares (TLS) algorithm. However, this algorithm performs poorly when the data matrix is a structured matrix and ill-conditioned. In blind deconvolution, the data matrix has a Toeplitz structure and is ill-conditioned. Accordingly, we develop a fully automatic single-channel blind-deconvolution algorithm to improve the performance of the TLS method. The proposed algorithm, called Toeplitz-structured sparse TLS, has no assumptions about the phase of the wavelet. However, it assumes that the reflectivity series is sparse. In addition, to reduce the model space and the number of unknowns, the algorithm benefits from the structural constraints on the data matrix. Our algorithm is an alternating minimization method and uses a generalized cross validation function to define the optimum regularization parameter automatically. Because the generalized cross validation function does not require any prior information about the noise level of the data, our approach is suitable for real-world applications. We validate the proposed technique using synthetic examples. In noise-free data, we achieve a near-optimal recovery of the wavelet and the reflectivity series. For noise-corrupted data with a moderate signal-to-noise ratio (S/N), we found that the algorithm successfully accounts for the noise in its model, resulting in a satisfactory performance. However, the results deteriorate as the S/N and the sparsity level of the data are decreased. We also successfully apply the algorithm to real data. The real-data examples come from 2D and 3D data sets of the Teapot Dome seismic survey.

scholarly journals Time-Lapse Seismic Monitoring of Onshore Reservoirs in Niger Delta, Field ‘K’ as a Case Study

2017 ◽  
Vol 1 (1) ◽  
pp. 23-27 ◽  
Author(s):  
A. Ogbamikhumi ◽  
T. Tralagba ◽  
E. E. Osagiede
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Niger Delta ◽  
Rock Physics ◽  
Time Lapse ◽  
Seismic Survey ◽  
Impedance Change ◽  
Data Set ◽  
Reservoir Fluid ◽  
4D Seismic

Field ‘K’ is a mature field in the coastal swamp onshore Niger delta, which has been producing since 1960. As a huge producing field with some potential for further sustainable production, field monitoring is therefore important in the identification of areas of unproduced hydrocarbon. This can be achieved by comparing production data with the corresponding changes in acoustic impedance observed in the maps generated from base survey (initial 3D seismic) and monitor seismic survey (4D seismic) across the field. This will enable the 4D seismic data set to be used for mapping reservoir details such as advancing water front and un-swept zones. The availability of good quality onshore time-lapse seismic data for Field ‘K’ acquired in 1987 and 2002 provided the opportunity to evaluate the effect of changes in reservoir fluid saturations on time-lapse amplitudes. Rock physics modelling and fluid substitution studies on well logs were carried out, and acoustic impedance change in the reservoir was estimated to be in the range of 0.25% to about 8%. Changes in reservoir fluid saturations were confirmed with time-lapse amplitudes within the crest area of the reservoir structure where reservoir porosity is 0.25%. In this paper, we demonstrated the use of repeat Seismic to delineate swept zones and areas hit with water override in a producing onshore reservoir.

Reducing risk and improving production in unconventional plays

2013 ◽  
Vol 1 (2) ◽  
pp. SB3-SB14 ◽  
Author(s):  
Tony Rebec ◽  
Marino Pareja ◽  
Zhiyong Zhao
Keyword(s):  
Seismic Data ◽  
Seismic Processing ◽  
Business Values ◽  
Improve Production ◽  
Reduce Risk ◽  
The Right

Using seismic data to reduce risk and improve production in unconventional plays requires careful preplanning based on the nature of the play, plus acquiring the right seismic, processing the seismic correctly, extracting the optimum information, and then transforming the information into business values. We discuss these criteria and focus on extracting the optimum information.

High-resolution seismic processing technique with broadband,wide-azimuth, and high-density seismic data - A case study of thin-sand reservoir in eastern China

2021 ◽  
pp. 1-45
Author(s):  
Qin Su ◽  
Huahui Zeng ◽  
Yancan Tian ◽  
HaiLiang Li ◽  
Lei Lyu ◽  
...  
Keyword(s):  
Seismic Data ◽  
Oil And Gas ◽  
Single Point ◽  
Eastern China ◽  
High Density ◽  
Songliao Basin ◽  
Seismic Processing ◽  
Oil And Gas Exploration ◽  
Sand Body

Seismic processing and interpretation techniques provide important tools for the oil and gas exploration of the Songliao Basin in eastern China, which is dominated by terrestrial facies. In the Songliao Basin, a large number of thin-sand reservoirs are widely distributed, which are the primary targets of potential oil and gas exploration and exploitation. An important job of the exploration in the Songliao Basin is to accurately describe the distribution of these thin-sand belts and the sand-body shapes. However, the thickness of these thin-sand reservoirs are generally below the resolution of the conventional seismic processing. Most of the reservoirs are thin-interbeds of sand and mudstones with strong vertical and lateral variations. This makes it difficult to accurately predict the vertical and horizontal distribution of the thin-sand bodies using the conventional seismic processing and interpretation methods. Additionally, these lithologic traps are difficult to identify due to the complex controlling factor and distribution characteristics, and strong concealment. These challenges motivate us to improve the seismic data quality to help delineate the thin-sand reservoirs. In this paper, we use the broadband, wide-azimuth, and high-density integrated seismic exploration technique to help delineate the thin-reservoirs. We first use field single-point excitation and single-point receiver acquisition to obtain seismic data with wide frequency-bands, wide-azimuth angles, and high folds, which contain rich geological information. Next, we perform the near-surface Q-compensation, viscoelastic prestack time migration, seismic attributes, and seismic waveform indication inversion on the new acquired seismic data. The 3D case study indicates the benefits of improving the imaging of thin-sand body and the accuracy of inversion and reservoir characterization using the method in this paper.

Sign in / Sign up

Export Citation Format

Share Document