Prestack inversion of seismic data with plane layer point source by wavefield downward continuation

1990 ◽  
Author(s):  
Tianxi Wang
Geophysics ◽  
1985 ◽  
Vol 50 (1) ◽  
pp. 77-89 ◽  
Author(s):  
Alastair D. McAulay

Prestack inversion with point‐source plane‐layer modeling has many advantages over poststack or normal incidence inversion. For example, it permits the determination of absolute compressional and shear velocities, density variations, and the accurate accounting of interbed and surface multiples. I neglect shear effects in this paper by assuming that they are adequately suppressed by velocity filtering. In the forward modeling step, a spherical wave expansion into plane waves is used to account for the point source. The plane‐wave reflection response for a set of plane layers is extended to the nonnormal incidence case. I use a Hankel transform to account for cylindrical symmetry. Generalized linear inversion is used because the fast recursive approaches available for normal incidence inversion are no longer applicable. I provide the derivation for the required derivative matrix, and I take into account the band‐limited nature of the data in frequency, time, and space. I demonstrate that moveout of events on realistic simulated prestack data enables the determination of absolute compressional velocity in the velocity‐depth profile, even though the data are band‐limited in frequency. I assume that preprocessing has adequately removed the shear and surface effects and that density is constant. Low frequencies in the velocity profile may be obtained more accurately than with velocity analysis used for stacking, because interbed multiples and other modeling phenomena are accounted for in the computation. Autoregressive modeling procedures that predict into the low frequencies of the velocity profile are also less accurate and cannot generate absolute velocity. I suggest future research leading to cost‐effective inversion of real data.


Geophysics ◽  
2015 ◽  
Vol 80 (2) ◽  
pp. WA61-WA67 ◽  
Author(s):  
Zhaoyun Zong ◽  
Xingyao Yin ◽  
Guochen Wu ◽  
Zhiping Wu

Elastic inverse-scattering theory has been extended for fluid discrimination using the time-lapse seismic data. The fluid factor, shear modulus, and density are used to parameterize the reference medium and the monitoring medium, and the fluid factor works as the hydrocarbon indicator. The baseline medium is, in the conception of elastic scattering theory, the reference medium, and the monitoring medium is corresponding to the perturbed medium. The difference in the earth properties between the monitoring medium and the baseline medium is taken as the variation in the properties between the reference medium and perturbed medium. The baseline and monitoring data correspond to the background wavefields and measured full fields, respectively. And the variation between the baseline data and monitoring data is taken as the scattered wavefields. Under the above hypothesis, we derived a linearized and qualitative approximation of the reflectivity variation in terms of the changes of fluid factor, shear modulus, and density with the perturbation theory. Incorporating the effect of the wavelet into the reflectivity approximation as the forward solver, we determined a practical prestack inversion approach in a Bayesian scheme to estimate the fluid factor, shear modulus, and density changes directly with the time-lapse seismic data. We evaluated the examples revealing that the proposed approach rendered the estimation of the fluid factor, shear modulus, and density changes stably, even with moderate noise.


Geophysics ◽  
1990 ◽  
Vol 55 (3) ◽  
pp. 378-379 ◽  
Author(s):  
Douglas W. McCowan

Mithal and Vera give the impression that the correct cylindrically symmetric slant stack (e.g., Chapman, 1981; Harding, 1985; Brysk and McCowan, 1986a) needed to represent point‐source radiation in vertically stratified media is both expensive and unnecessary in ordinary data analysis.


Geophysics ◽  
1991 ◽  
Vol 56 (9) ◽  
pp. 1482-1485 ◽  
Author(s):  
Robert Sun ◽  
George A. McMechan

The concept of downward continuation of a seismic wavefield recorded on the earth’s surface to remove near‐surface effects has previously been applied by a number of authors including Schultz and Sherwood (1980), Berryhill (1979, 1984), and McMechan and Chen (1990). Recently, McMechan and Sun (1991) demonstrated, using synthetic elastic data, that downward continuation of an elastic (two‐component) seismic wavefield separates various seismic waves, based on their depth of propagation. This was used to simultaneously remove direct waves and ground roll. The direct compressional and shear waves and the ground roll get left behind in the near surface during downward continuation; subsequent upward continuation reconstructs the surface‐recorded wavefield without the waves propagating in the shallow layers.


2013 ◽  
Vol 1 (2) ◽  
pp. SB97-SB108 ◽  
Author(s):  
Benjamin L. Dowdell ◽  
J. Tim Kwiatkowski ◽  
Kurt J. Marfurt

With the advent of horizontal drilling and hydraulic fracturing in the Midcontinent, USA, fields once thought to be exhausted are now experiencing renewed exploitation. However, traditional Midcontinent seismic analysis techniques no longer provide satisfactory reservoir characterization for these unconventional plays; new seismic analysis methods are needed to properly characterize these radically innovative play concepts. Time processing and filtering is applied to a raw 3D seismic data set from Osage County, Oklahoma, paying careful attention to velocity analysis, residual statics, and coherent noise filtering. The use of a robust prestack structure-oriented filter and spectral whitening greatly enhances the results. After prestack time migrating the data using a Kirchhoff algorithm, new velocities are picked. A final normal moveout correction is applied using the new velocities, followed by a final prestack structure-oriented filter and spectral whitening. Simultaneous prestack inversion uses the reprocessed and time-migrated seismic data as input, along with a well from within the bounds of the survey. With offsets out to 3048 m and a target depth of approximately 880 m, we can invert for density in addition to P- and S-impedance. Prestack inversion attributes are sensitive to lithology and porosity while surface seismic attributes such as coherence and curvature are sensitive to lateral changes in waveform and structure. We use these attributes in conjunction with interpreted horizontal image logs to identify zones of high porosity and high fracture density.


2010 ◽  
Vol 29 (10) ◽  
pp. 1220-1226 ◽  
Author(s):  
Gorka Garcia Leiceaga ◽  
Josimar Silva ◽  
Fredy Artola ◽  
Evelin Marquez ◽  
Joclean Vanzeler

Sign in / Sign up

Export Citation Format

Share Document