Crosshole conductivity tomography using an electrical field ratio method

2000 ◽  
Author(s):  
Cao Junxing
Keyword(s):  
Ratio Method ◽  
Electrical Field ◽  
Conductivity Tomography

X-Ray Analysis of Frozen Hydrated Sections:The Unconventional Approach

1982 ◽  
Vol 40 ◽  
pp. 754-757
Author(s):  
R. Beeuwkes ◽  
A. Saubermann ◽  
P. Echlin ◽  
S. Churchill
Keyword(s):  
Ratio Method ◽  
Frozen Sections ◽  
Technical Problems ◽  
Sample Handling ◽  
X Ray ◽  
Common Group ◽  
Ideal Method ◽  
Classic Paper ◽  
Physical Principles ◽  
The Ideal

Fifteen years ago, Hall described clearly the advantages of the thin section approach to biological x-ray microanalysis, and described clearly the ratio method for quantitive analysis in such preparations. In this now classic paper, he also made it clear that the ideal method of sample preparation would involve only freezing and sectioning at low temperature. Subsequently, Hall and his coworkers, as well as others, have applied themselves to the task of direct x-ray microanalysis of frozen sections. To achieve this goal, different methodological approachs have been developed as different groups sought solutions to a common group of technical problems. This report describes some of these problems and indicates the specific approaches and procedures developed by our group in order to overcome them. We acknowledge that the techniques evolved by our group are quite different from earlier approaches to cryomicrotomy and sample handling, hence the title of our paper. However, such departures from tradition have been based upon our attempt to apply basic physical principles to the processes involved. We feel we have demonstrated that such a break with tradition has valuable consequences.

Principles of Low-Vacuum SEM

1992 ◽  
Vol 50 (2) ◽  
pp. 1304-1305
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
New Technologies ◽  
High Vacuum ◽  
Optical Microscope ◽  
Specimen Surface ◽  
Electrical Field ◽  
Gaseous Environment ◽  
New Information ◽  
Gas Molecules ◽  
New Interactions ◽  
Gas Pressures

Only recently it became possible to expand scanning electron microscopy to low vacuum and atmospheric pressure through the introduction of several new technologies. In principle, only the specimen is provided with a controlled gaseous environment while the optical microscope column is kept at high vacuum. In the specimen chamber, the gas can generate new interactions with i) the probe electrons, ii) the specimen surface, and iii) the specimen-specific signal electrons. The results of these interactions yield new information about specimen surfaces not accessible to conventional high vacuum SEM. Several microscope types are available differing from each other by the maximum available gas pressure and the types of signals which can be used for investigation of specimen properties.Electrical non-conductors can be easily imaged despite charge accumulations at and beneath their surface. At high gas pressures between 10-2 and 2 torr, gas molecules are ionized in the electrical field between the specimen surface and the surrounding microscope parts through signal electrons and, to a certain extent, probe electrons. The gas provides a stable ion flux for a surface charge equalization if sufficient gas ions are provided.

An ultrastructural analysis of the sympathetic innervation of the rabbit ear artery and middle cerebral artery and their branches

1992 ◽  
Vol 50 (1) ◽  
pp. 934-935
Author(s):  
John T. Dodge ◽  
John A. Bevan
Keyword(s):  
Middle Cerebral Artery ◽  
Cerebral Artery ◽  
Sympathetic Innervation ◽  
Electrical Field Stimulation ◽  
Rabbit Ear Artery ◽  
Electrical Field ◽  
Functional Differences ◽  
Ear Artery ◽  
Rabbit Ear ◽  
Vascular Beds

Unlike many peripheral vascular beds, the sympathetic nervous system exerts little control on cerebral blood flow. The contractile response of isolated rabbit middle cerebral artery (MCA) segments to electrical field stimulation of its intramural nerves is less than in a similar-sized artery from the ear. This study was undertaken to characterize and compare the perivascular neuromuscular relationships and innervation density of similar-sized arteries varying in diameter from these two different regional arterial beds to see if there were structural correlates for these functional differences.

Predicting Fetal Chromosome Anomalies in the First Trimester Using Pregnancy Associated Plasma Protein-A: A Comparison of Statistical Methods

1993 ◽  
Vol 32 (02) ◽  
pp. 175-179 ◽  
Author(s):  
B. Brambati ◽  
T. Chard ◽  
J. G. Grudzinskas ◽  
M. C. M. Macintosh
Keyword(s):  
Logistic Regression ◽  
General Population ◽  
Likelihood Ratio ◽  
False Positive ◽  
False Positive Rate ◽  
Ratio Method ◽  
Detection Rates ◽  
Gaussian Distributions ◽  
Positive Rate ◽  
Likelihood Ratio Method

Abstract:The analysis of the clinical efficiency of a biochemical parameter in the prediction of chromosome anomalies is described, using a database of 475 cases including 30 abnormalities. A comparison was made of two different approaches to the statistical analysis: the use of Gaussian frequency distributions and likelihood ratios, and logistic regression. Both methods computed that for a 5% false-positive rate approximately 60% of anomalies are detected on the basis of maternal age and serum PAPP-A. The logistic regression analysis is appropriate where the outcome variable (chromosome anomaly) is binary and the detection rates refer to the original data only. The likelihood ratio method is used to predict the outcome in the general population. The latter method depends on the data or some transformation of the data fitting a known frequency distribution (Gaussian in this case). The precision of the predicted detection rates is limited by the small sample of abnormals (30 cases). Varying the means and standard deviations (to the limits of their 95% confidence intervals) of the fitted log Gaussian distributions resulted in a detection rate varying between 42% and 79% for a 5% false-positive rate. Thus, although the likelihood ratio method is potentially the better method in determining the usefulness of a test in the general population, larger numbers of abnormal cases are required to stabilise the means and standard deviations of the fitted log Gaussian distributions.

In Vivo Effect of Suloctidil as an Antiplatelet Agent

1979 ◽  
Vol 41 (03) ◽  
pp. 465-474 ◽  
Author(s):  
Marcia R Stelzer ◽  
Thomas S Burns ◽  
Robert N Saunders
Keyword(s):  
Ex Vivo ◽  
Antiplatelet Agent ◽  
Ratio Method ◽  
Platelet Aggregate ◽  
Permanent Effect ◽  
Platelet Aggregates ◽  
5 Ht Uptake ◽  
High Doses

SummaryThe relationship between the effects of suloctidil in vivo as an antiplatelet agent and in vitro as a modifier of platelet serotonin (5-HT) parameters was investigated. Suloctidil was found to be effective in reducing platelet aggregates formation in the retired breeder rat as determined using the platelet aggregate ratio method (PAR) with an ED50 of 16.1 mg/kg 24 hours post administration. In contrast to the hypothesis that 5-HT depletion is involved in the anti-aggregatory mechanism of suloctidil, no correlation was found between platelet 5- HT content and this antiplatelet activity. Reduction of platelet 5-HT content required multiple injections of high doses (100 mg/kg/day) of suloctidil. Suloctidil administration for 8 days at 100 mg/kg/day, which lowered platelet 5-HT content by 50%, resulted in no permanent effect on ex vivo platelet 5-HT uptake or thrombin-induced release, nor alteration in the plasma 5-HT level. However, these platelets exhibited a short-lived, significant increase in percent leakage of 5-HT after 30 minutes of incubation. Therefore, suloctidil treatment at high doses may with time result in platelet 5-HT depletion, however this effect is probably not related to the primary anti-aggregatory activity of the drug.

Electrical Anisotropy of Thin Metal Films Growing on Dielectric Substrates

2002 ◽  
Vol 7 (2) ◽  
pp. 45-52
Author(s):  
L. Jakučionis ◽  
V. Kleiza
Keyword(s):  
Magnetic Field ◽  
Thin Films ◽  
Uniaxial Anisotropy ◽  
Metal Films ◽  
Thin Layers ◽  
Electrical Anisotropy ◽  
Electrical Field ◽  
Dielectric Substrates ◽  
Unequal Probability ◽  
Conductive Thin Films

Electrical properties of conductive thin films, that are produced by vacuum evaporation on the dielectric substrates, and which properties depend on their thickness, usually are anisotropic i.e. they have uniaxial anisotropy. If the condensate grow on dielectric substrates on which plane electrical field E is created the transverse voltage U⊥ appears on the boundary of the film in the direction perpendicular to E. Transverse voltage U⊥ depends on the angle γ between the applied magnetic field H and axis of light magnetisation. When electric field E is applied to continuous or grid layers, U⊥ and resistance R of layers are changed by changing γ. It means that value of U⊥ is the measure of anisotropy magnitude. Increasing voltage U0 , which is created by E, U⊥ increases to certain magnitude and later decreases. The anisotropy of continuous thin layers is excited by inequality of conductivity tensor components σ0 ≠ σ⊥. The reason of anisotropy is explained by the model which shows that properties of grain boundaries are defined by unequal probability of transient of charge carrier.

Analysis of the Bias Dependent Spectral Response of a-SiC:H p-i-n Photodiode

2002 ◽  
Vol 715 ◽  
Author(s):  
P. Louro ◽  
A. Fantoni ◽  
Yu. Vygranenko ◽  
M. Fernandes ◽  
M. Vieira
Keyword(s):  
Bias Voltage ◽  
Voltage Dependence ◽  
Spectral Response ◽  
Surface Recombination ◽  
Electrical Field ◽  
Field Reversal ◽  
Current Voltage ◽  
Voltage Dependent ◽  
And Inversion ◽  
Device Operation

AbstractThe bias voltage dependent spectral response (with and without steady state bias light) and the current voltage dependence has been simulated and compared to experimentally obtained values. Results show that in the heterostructures the bias voltage influences differently the field and the diffusion part of the photocurrent. The interchange between primary and secondary photocurrent (i. e. between generator and load device operation) is explained by the interaction of the field and the diffusion components of the photocurrent. A field reversal that depends on the light bias conditions (wavelength and intensity) explains the photocurrent reversal. The field reversal leads to the collapse of the diode regime (primary photocurrent) launches surface recombination at the p-i and i-n interfaces which is responsible for a double-injection regime (secondary photocurrent). Considerations about conduction band offsets, electrical field profiles and inversion layers will be taken into account to explain the optical and voltage bias dependence of the spectral response.

Development of an AC Electrical Field Tribochemical Polishing Technique to Promote High-Efficiency Polishing for Glass Substrates

2012 ◽  
Vol 78 (4) ◽  
pp. 316-320
Author(s):  
Hiroshi IKEDA ◽  
Yoichi AKAGAMI ◽  
Michio UNEDA ◽  
Osamu OHNISHI ◽  
Syuhei KUROKAWA ◽  
...  
Keyword(s):  
High Efficiency ◽  
Electrical Field ◽  
Glass Substrates
Sign in / Sign up

Export Citation Format

Share Document