Quartic moveout coefficient: 3D description and application to tilted TI media

Geophysics ◽  
2003 ◽  
Vol 68 (5) ◽  
pp. 1600-1610 ◽  
Author(s):  
Andres Pech ◽  
Ilya Tsvankin ◽  
Vladimir Grechka
Keyword(s):  
Heterogeneous Media ◽  
Symmetry Axis ◽  
High Sensitivity ◽  
Transversely Isotropic ◽  
Seismic Inversion ◽  
P Wave ◽  
Individual Values ◽  
Weak Anisotropy ◽  
Essential Information ◽  
Ti Media

Nonhyperbolic (long‐spread) moveout provides essential information for a number of seismic inversion/processing applications, particularly for parameter estimation in anisotropic media. Here, we present an analytic expression for the quartic moveout coefficient A4 that controls the magnitude of nonhyperbolic moveout of pure (nonconverted) modes. Our result takes into account reflection‐point dispersal on irregular interfaces and is valid for arbitrarily anisotropic, heterogeneous media. All quantities needed to compute A4 can be evaluated during the tracing of the zero‐offset ray, so long‐spread moveout can be modeled without time‐consuming multioffset, multiazimuth ray tracing. The general equation for the quartic coefficient is then used to study azimuthally varying nonhyperbolic moveout of P‐waves in a dipping transversely isotropic (TI) layer with an arbitrary tilt ν of the symmetry axis. Assuming that the symmetry axis is confined to the dip plane, we employed the weak‐anisotropy approximation to analyze the dependence of A4 on the anisotropic parameters. The linearized expression for A4 is proportional to the anellipticity coefficient η ≈ ε − δ and does not depend on the individual values of the Thomsen parameters. Typically, the magnitude of nonhyperbolic moveout in tilted TI media above a dipping reflector is highest near the reflector strike, whereas deviations from hyperbolic moveout on the dip line are substantial only for mild dips. The azimuthal variation of the quartic coefficient is governed by the tilt ν and reflector dip φ and has a much more complicated character than the NMO–velocity ellipse. For example, if the symmetry axis is vertical (VTI media, ν = 0) and the dip φ < 30°, A4 goes to zero on two lines with different azimuths where it changes sign. If the symmetry axis is orthogonal to the reflector (this model is typical for thrust‐and‐fold belts), the strike‐line quartic coefficient is defined by the well‐known expression for a horizontal VTI layer (i.e., it is independent of dip), while the dip‐line A4 is proportional to cos4 φ and rapidly decreases with dip. The high sensitivity of the quartic moveout coefficient to the parameter η and the tilt of the symmetry axis can be exploited in the inversion of wide‐azimuth, long‐spread P‐wave data for the parameters of TI media.

Reflection moveout approximations for P-waves in a moderately anisotropic homogeneous tilted transverse isotropy layer

Geophysics ◽  
2017 ◽  
Vol 82 (5) ◽  
pp. C175-C185 ◽  
Author(s):  
Ivan Pšenčík ◽  
Véronique Farra
Keyword(s):  
Transverse Isotropy ◽  
Transversely Isotropic ◽  
P Wave ◽  
Weak Anisotropy ◽  
P Waves ◽  
3D Space ◽  
Axis Of Symmetry ◽  
Relative Errors ◽  
Symmetry Tests ◽  
Ti Media

We have developed approximate nonhyperbolic P-wave moveout formulas applicable to weakly or moderately anisotropic media of arbitrary anisotropy symmetry and orientation. Instead of the commonly used Taylor expansion of the square of the reflection traveltime in terms of the square of the offset, we expand the square of the reflection traveltime in terms of weak-anisotropy (WA) parameters. No acoustic approximation is used. We specify the formulas designed for anisotropy of arbitrary symmetry for the transversely isotropic (TI) media with the axis of symmetry oriented arbitrarily in the 3D space. Resulting formulas depend on three P-wave WA parameters specifying the TI symmetry and two angles specifying the orientation of the axis of symmetry. Tests of the accuracy of the more accurate of the approximate formulas indicate that maximum relative errors do not exceed 0.3% or 2.5% for weak or moderate P-wave anisotropy, respectively.

Analytic study of the geometrical spreading of P-waves in a layered transversely isotropic medium with a vertical symmetry axis

Geophysics ◽  
2000 ◽  
Vol 65 (4) ◽  
pp. 1305-1315 ◽  
Author(s):  
Hongbo Zhou ◽  
George A. McMechan
Keyword(s):  
Isotropic Medium ◽  
Symmetry Axis ◽  
Transverse Isotropy ◽  
Analytical Formula ◽  
Transversely Isotropic ◽  
P Wave ◽  
Geometrical Spreading ◽  
Transversely Isotropic Medium ◽  
Weak Anisotropy ◽  
Special Cases

An analytical formula for geometrical spreading is derived for a horizontally layered transversely isotropic medium with a vertical symmetry axis (VTI). With this expression, geometrical spreading can be determined using only the anisotropy parameters in the first layer, the traveltime derivatives, and the source‐receiver offset. Explicit, numerically feasible expressions for geometrical spreading are obtained for special cases of transverse isotropy (weak anisotropy and elliptic anisotropy). Geometrical spreading can be calculated for transversly isotropic (TI) media by using picked traveltimes of primary nonhyperbolic P-wave reflections without having to know the actual parameters in the deeper subsurface; no ray tracing is needed. Synthetic examples verify the algorithm and show that it is numerically feasible for calculation of geometrical spreading. For media with a few (4–5) layers, relative errors in the computed geometrical spreading remain less than 0.5% for offset/depth ratios less than 1.0. Errors that change with offset are attributed to inaccuracy in the expression used for nonhyberbolic moveout. Geometrical spreading is most sensitive to errors in NMO velocity, followed by errors in zero‐offset reflection time, followed by errors in anisotropy of the surface layer. New relations between group and phase velocities and between group and phase angles are shown in appendices.

scholarly journals Velocity analysis for transversely isotropic media

Geophysics ◽  
1995 ◽  
Vol 60 (5) ◽  
pp. 1550-1566 ◽  
Author(s):  
Tariq Alkhalifah ◽  
Ilya Tsvankin
Keyword(s):  
Transversely Isotropic ◽  
Anisotropic Media ◽  
P Wave ◽  
Velocity Analysis ◽  
Analytic Equation ◽  
Weak Anisotropy ◽  
Time Processing ◽  
Time Migration ◽  
Ti Media ◽  
Ray Parameter

The main difficulty in extending seismic processing to anisotropic media is the recovery of anisotropic velocity fields from surface reflection data. We suggest carrying out velocity analysis for transversely isotropic (TI) media by inverting the dependence of P‐wave moveout velocities on the ray parameter. The inversion technique is based on the exact analytic equation for the normal‐moveout (NMO) velocity for dipping reflectors in anisotropic media. We show that P‐wave NMO velocity for dipping reflectors in homogeneous TI media with a vertical symmetry axis depends just on the zero‐dip value [Formula: see text] and a new effective parameter η that reduces to the difference between Thomsen parameters ε and δ in the limit of weak anisotropy. Our inversion procedure makes it possible to obtain η and reconstruct the NMO velocity as a function of ray parameter using moveout velocities for two different dips. Moreover, [Formula: see text] and η determine not only the NMO velocity, but also long‐spread (nonhyperbolic) P‐wave moveout for horizontal reflectors and the time‐migration impulse response. This means that inversion of dip‐moveout information allows one to perform all time‐processing steps in TI media using only surface P‐wave data. For elliptical anisotropy (ε = δ), isotropic time‐processing methods remain entirely valid. We show the performance of our velocity‐analysis method not only on synthetic, but also on field data from offshore Africa. Accurate time‐to‐depth conversion, however, requires that the vertical velocity [Formula: see text] be resolved independently. Unfortunately, it cannot be done using P‐wave surface moveout data alone, no matter how many dips are available. In some cases [Formula: see text] is known (e.g., from check shots or well logs); then the anisotropy parameters ε and δ can be found by inverting two P‐wave NMO velocities corresponding to a horizontal and a dipping reflector. If no well information is available, all three parameters ([Formula: see text], ε, and δ) can be obtained by combining our inversion results with shear‐wave information, such as the P‐SV or SV‐SV wave NMO velocities for a horizontal reflector. Generalization of the single‐layer NMO equation to layered anisotropic media with a dipping reflector provides a basis for extending anisotropic velocity analysis to vertically inhomogeneous media. We demonstrate how the influence of a stratified anisotropic overburden on moveout velocity can be stripped through a Dix‐type differentiation procedure.

Anisotropic parameters and P‐wave velocity for orthorhombic media

Geophysics ◽  
1997 ◽  
Vol 62 (4) ◽  
pp. 1292-1309 ◽  
Author(s):  
Ilya Tsvankin
Keyword(s):  
Fractured Reservoirs ◽  
Transversely Isotropic ◽  
Azimuthal Velocity ◽  
Analytic Solutions ◽  
Seismic Inversion ◽  
P Wave ◽  
Weak Anisotropy ◽  
P Waves ◽  
Velocity Anisotropy ◽  
Wide Range

Although orthorhombic (or orthotropic) symmetry is believed to be common for fractured reservoirs, the difficulties in dealing with nine independent elastic constants have precluded this model from being used in seismology. A notation introduced in this work is designed to help make seismic inversion and processing for orthorhombic media more practical by simplifying the description of a wide range of seismic signatures. Taking advantage of the fact that the Christoffel equation has the same form in the symmetry planes of orthorhombic and transversely isotropic (TI) media, we can replace the stiffness coefficients by two vertical (P and S) velocities and seven dimensionless parameters that represent an extension of Thomsen's anisotropy coefficients to orthorhombic models. By design, this notation provides a uniform description of anisotropic media with both orthorhombic and TI symmetry. The dimensionless anisotropic parameters introduced here preserve all attractive features of Thomsen notation in treating wave propagation and performing 2-D processing in the symmetry planes of orthorhombic media. The new notation has proved useful in describing seismic signatures outside the symmetry planes as well, especially for P‐waves. Linearization of P‐wave phase velocity in the anisotropic coefficients leads to a concise weak‐anisotropy approximation that provides good accuracy even for models with pronounced polar and azimuthal velocity variations. This approximation can be used efficiently to build analytic solutions for various seismic signatures. One of the most important advantages of the new notation is the reduction in the number of parameters responsible for P‐wave velocities and traveltimes. All kinematic signatures of P‐waves in orthorhombic media depend on just the vertical velocity [Formula: see text] and five anisotropic parameters, with [Formula: see text] serving as a scaling coefficient in homogeneous media. This conclusion, which holds even for orthorhombic models with strong velocity anisotropy, provides an analytic basis for application of P‐wave traveltime inversion and data processing algorithms in orthorhombic media.

Shear waves in acoustic anisotropic media

Geophysics ◽  
2004 ◽  
Vol 69 (2) ◽  
pp. 576-582 ◽  
Author(s):  
Vladimir Grechka ◽  
Linbin Zhang ◽  
James W. Rector
Keyword(s):  
Symmetry Axis ◽  
Shear Waves ◽  
Transversely Isotropic ◽  
P Wave ◽  
Waveform Modeling ◽  
Anisotropic Models ◽  
Full Waveform ◽  
Phase And Group Velocities ◽  
Ti Media ◽  
Wave Phenomena

Acoustic transversely isotropic (TI) media are defined by artificially setting the shear‐wave velocity in the direction of symmetry axis, VS0, to zero. Contrary to conventional wisdom that equating VS0 = 0 eliminates shear waves, we demonstrate their presence and examine their properties. Specifically, we show that SV‐waves generally have finite nonzero phase and group velocities in acoustic TI media. In fact, these waves have been observed in full waveform modeling, but apparently they were not understood and labeled as numerical artifacts. Acoustic TI media are characterized by extreme, in some sense infinite strength of anisotropy. It makes the following unusual wave phenomena possible: (1) there are propagation directions, where the SV‐ray is orthogonal to the corresponding wavefront normal, (2) the SV‐wave whose ray propagates along the symmetry axis is polarized parallel to the P‐wave propagating in the same direction, (3) P‐wave singularities, that is, directions where P‐ and SV‐wave phase velocities coincide might exist in acoustic TI media. We also briefly discuss some aspects of wave propagation in low‐symmetry acoustic anisotropic models. Extreme anisotropy in those media creates bizarre phase‐ and group‐velocity surfaces that might bring intellectual delight to an anisotropic guru.

Geometrical spreading in a layered transversely isotropic medium with vertical symmetry axis

Geophysics ◽  
2003 ◽  
Vol 68 (6) ◽  
pp. 2082-2091 ◽  
Author(s):  
Bjørn Ursin ◽  
Ketil Hokstad
Keyword(s):  
Ray Tracing ◽  
Seismic Data ◽  
Symmetry Axis ◽  
Transversely Isotropic ◽  
Analytical Approximation ◽  
Geometrical Spreading ◽  
S Wave ◽  
Weak Anisotropy ◽  
P Waves ◽  
Amplitude Versus

Compensation for geometrical spreading is important in prestack Kirchhoff migration and in amplitude versus offset/amplitude versus angle (AVO/AVA) analysis of seismic data. We present equations for the relative geometrical spreading of reflected and transmitted P‐ and S‐wave in horizontally layered transversely isotropic media with vertical symmetry axis (VTI). We show that relatively simple expressions are obtained when the geometrical spreading is expressed in terms of group velocities. In weakly anisotropic media, we obtain simple expressions also in terms of phase velocities. Also, we derive analytical equations for geometrical spreading based on the nonhyperbolic traveltime formula of Tsvankin and Thomsen, such that the geometrical spreading can be expressed in terms of the parameters used in time processing of seismic data. Comparison with numerical ray tracing demonstrates that the weak anisotropy approximation to geometrical spreading is accurate for P‐waves. It is less accurate for SV‐waves, but has qualitatively the correct form. For P waves, the nonhyperbolic equation for geometrical spreading compares favorably with ray‐tracing results for offset‐depth ratios less than five. For SV‐waves, the analytical approximation is accurate only at small offsets, and breaks down at offset‐depth ratios less than unity. The numerical results are in agreement with the range of validity for the nonhyperbolic traveltime equations.

scholarly journals The offset-midpoint traveltime pyramid in 3D transversely isotropic media with a horizontal symmetry axis

Geophysics ◽  
2015 ◽  
Vol 80 (1) ◽  
pp. T51-T62 ◽  
Author(s):  
Qi Hao ◽  
Alexey Stovas ◽  
Tariq Alkhalifah
Keyword(s):  
Symmetry Axis ◽  
Transversely Isotropic ◽  
P Wave ◽  
Analytic Representation ◽  
Velocity Inversion ◽  
Transversely Isotropic Media ◽  
Horizontal Symmetry ◽  
Time Domains ◽  
Isotropic Media ◽  
Hti Media

Analytic representation of the offset-midpoint traveltime equation for anisotropy is very important for prestack Kirchhoff migration and velocity inversion in anisotropic media. For transversely isotropic media with a vertical symmetry axis, the offset-midpoint traveltime resembles the shape of a Cheops’ pyramid. This is also valid for homogeneous 3D transversely isotropic media with a horizontal symmetry axis (HTI). We extended the offset-midpoint traveltime pyramid to the case of homogeneous 3D HTI. Under the assumption of weak anellipticity of HTI media, we derived an analytic representation of the P-wave traveltime equation and used Shanks transformation to improve the accuracy of horizontal and vertical slownesses. The traveltime pyramid was derived in the depth and time domains. Numerical examples confirmed the accuracy of the proposed approximation for the traveltime function in 3D HTI media.

Normal moveout from dipping reflectors in anisotropic media

Geophysics ◽  
1995 ◽  
Vol 60 (1) ◽  
pp. 268-284 ◽  
Author(s):  
Ilya Tsvankin
Keyword(s):  
Symmetry Axis ◽  
Transverse Isotropy ◽  
Transversely Isotropic ◽  
Anisotropic Media ◽  
Weak Anisotropy ◽  
Anisotropic Models ◽  
Transversely Isotropic Media ◽  
Wide Range ◽  
Isotropic Media ◽  
The Difference

Description of reflection moveout from dipping interfaces is important in developing seismic processing methods for anisotropic media, as well as in the inversion of reflection data. Here, I present a concise analytic expression for normal‐moveout (NMO) velocities valid for a wide range of homogeneous anisotropic models including transverse isotropy with a tilted in‐plane symmetry axis and symmetry planes in orthorhombic media. In transversely isotropic media, NMO velocity for quasi‐P‐waves may deviate substantially from the isotropic cosine‐of‐dip dependence used in conventional constant‐velocity dip‐moveout (DMO) algorithms. However, numerical studies of NMO velocities have revealed no apparent correlation between the conventional measures of anisotropy and errors in the cosine‐of‐dip DMO correction (“DMO errors”). The analytic treatment developed here shows that for transverse isotropy with a vertical symmetry axis, the magnitude of DMO errors is dependent primarily on the difference between Thomsen parameters ε and δ. For the most common case, ε − δ > 0, the cosine‐of‐dip–corrected moveout velocity remains significantly larger than the moveout velocity for a horizontal reflector. DMO errors at a dip of 45 degrees may exceed 20–25 percent, even for weak anisotropy. By comparing analytically derived NMO velocities with moveout velocities calculated on finite spreads, I analyze anisotropy‐induced deviations from hyperbolic moveout for dipping reflectors. For transversely isotropic media with a vertical velocity gradient and typical (positive) values of the difference ε − δ, inhomogeneity tends to reduce (sometimes significantly) the influence of anisotropy on the dip dependence of moveout velocity.

scholarly journals Seismic AVOA Inversion for Weak Anisotropy Parameters and Fracture Density in a Monoclinic Medium

2020 ◽  
Vol 10 (15) ◽  
pp. 5136 ◽  
Author(s):  
Zijian Ge ◽  
Shulin Pan ◽  
Jingye Li
Keyword(s):  
Fractured Rock ◽  
Synthetic Data ◽  
Transversely Isotropic ◽  
P Wave ◽  
Inversion Method ◽  
Fracture Density ◽  
Weak Anisotropy ◽  
Amplitude Versus Offset ◽  
Porosity And Permeability ◽  
Transverse Isotropic

In shale gas development, fracture density is an important lithologic parameter to properly characterize reservoir reconstruction, establish a fracturing scheme, and calculate porosity and permeability. The traditional methods usually assume that the fracture reservoir is one set of aligned vertical fractures, embedded in an isotropic background, and estimate some alternative parameters associated with fracture density. Thus, the low accuracy caused by this simplified model, and the intrinsic errors caused by the indirect substitution, affect the estimation of fracture density. In this paper, the fractured rock of monoclinic symmetry assumes two non-orthogonal vertical fracture sets, embedded in a transversely isotropic background. Firstly, assuming that the fracture radius, width, and orientation are known, a new form of P-wave reflection coefficient, in terms of weak anisotropy (WA) parameters and fracture density, was obtained by substituting the stiffness coefficients of vertical transverse isotropic (VTI) background, normal, and tangential fracture compliances. Then, a linear amplitude versus offset and azimuth (AVOA) inversion method, of WA parameters and fracture density, was constructed by using Bayesian theory. Tests on synthetic data showed that WA parameters, and fracture density, are stably estimated in the case of seismic data containing a moderate noise, which can provide a reliable tool in fracture prediction.

Reflection and transmission responses in a layered transversely isotropic medium with horizontal symmetry axis

Geophysics ◽  
2019 ◽  
Vol 84 (3) ◽  
pp. C143-C157 ◽  
Author(s):  
Song Jin ◽  
Alexey Stovas
Keyword(s):  
Good Accuracy ◽  
Symmetry Axis ◽  
Local Property ◽  
Transversely Isotropic ◽  
Weak Anisotropy ◽  
Reflection And Transmission ◽  
Numerical Tests ◽  
Transversely Isotropic Media ◽  
Horizontal Symmetry ◽  
Isotropic Media

Seismic wave reflection and transmission (R/T) responses characterize the subsurface local property, and the widely spread anisotropy has considerable influences even at small incident angles. We have considered layered transversely isotropic media with horizontal symmetry axes (HTI), and the symmetry axes were not restricted to be aligned. With the assumption of weak contrast across the interface, linear approximations for R/T coefficients normalized by vertical energy flux are derived based on a simple layered HTI model. We also obtain the approximation with the isotropic background medium under an additional weak anisotropy assumption. Numerical tests illustrate the good accuracy of the approximations compared with the exact results.

Sign in / Sign up

Export Citation Format

Share Document