Coherent noise attenuation in the radial trace domain

Geophysics ◽  
2003 ◽  
Vol 68 (4) ◽  
pp. 1408-1416 ◽  
Author(s):  
David C. Henley
Keyword(s):  
Seismic Data ◽  
Noisy Data ◽  
Data Mapping ◽  
Noise Attenuation ◽  
Practical Application ◽  
Coherent Noise ◽  
Data Set ◽  
Persistent Problem ◽  
Mapping Algorithm ◽  
Better Than

Coherent noise is a persistent problem in seismic imaging, and a number of techniques have been developed to attenuate it. The radial trace (RT) transform, a simple seismic data mapping algorithm, can be used as the basis for a particularly flexible and effective method for attenuating coherent noise on both prestack and poststack seismic data. Described here are the principles and some practical application details for attenuating coherent noise in the RT domain. A comparison between frequency–wavenumber (f–k) and RT domain filtering on a synthetic model is presented, and some of the differences and advantages of RT methods are identified. Next, RT coherent noise attenuation is demonstrated using a set of good‐quality field data; it is then applied to a very noisy data set. The results obtained with this last set prove to be as good as, or better than, those produced using f–k filtering.

Ground-roll attenuation using generative adversarial networks

Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. WA255-WA267 ◽  
Author(s):  
Yijun Yuan ◽  
Xu Si ◽  
Yue Zheng
Keyword(s):  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Training Data ◽  
Generative Adversarial Networks ◽  
Coherent Noise ◽  
Traditional Methods ◽  
Generative Adversarial Network ◽  
Data Set ◽  
Persistent Problem ◽  
Ground Roll

Ground roll is a persistent problem in land seismic data. This type of coherent noise often contaminates seismic signals and severely reduces the signal-to-noise ratio of seismic data. A variety of methods for addressing ground-roll attenuation have been developed. However, existing methods are limited, especially when using real land seismic data. For example, when ground roll and reflections overlap in the time or frequency domains, traditional methods cannot completely separate them and they often distort the signals during the suppression process. We have developed a generative adversarial network (GAN) to attenuate ground roll in seismic data. Unlike traditional methods for ground-roll attenuation dependent on various filters, the GAN method is based on a large training data set that includes pairs of data with and without ground roll. After training the neural network with the training data, the network can identify and filter out any noise in the data. To fulfill this purpose, the proposed method uses a generator and a discriminator. Through network training, the generator learns to create the data that can fool the discriminator, and the discriminator can then distinguish between the data produced by the generator and the training data. As a result of the competition between generators and discriminators, generators produce better images whereas discriminators accurately recognize targets. Tests on synthetic and real land seismic data show that the proposed method effectively reveals reflections masked by the ground roll and obtains better results in the attenuation of ground roll and in the preservation of signals compared to the three other methods.

scholarly journals Convolutional sparse coding for noise attenuation in seismic data

Geophysics ◽  
2021 ◽  
Vol 86 (1) ◽  
pp. V23-V30
Author(s):  
Zhaolun Liu ◽  
Kai Lu
Keyword(s):  
Sparse Coding ◽  
Seismic Data ◽  
Field Data ◽  
Synthetic Data ◽  
Basis Functions ◽  
High Signal ◽  
Noise Attenuation ◽  
Coherent Noise ◽  
Denoising Method ◽  
Data Set

We have developed convolutional sparse coding (CSC) to attenuate noise in seismic data. CSC gives a data-driven set of basis functions whose coefficients form a sparse distribution. The noise attenuation method by CSC can be divided into the training and denoising phases. Seismic data with a relatively high signal-to-noise ratio are chosen for training to get the learned basis functions. Then, we use all (or a subset) of the basis functions to attenuate the random or coherent noise in the seismic data. Numerical experiments on synthetic data show that CSC can learn a set of shifted invariant filters, which can reduce the redundancy of learned filters in the traditional sparse-coding denoising method. CSC achieves good denoising performance when training with the noisy data and better performance when training on a similar but noiseless data set. The numerical results from the field data test indicate that CSC can effectively suppress seismic noise in complex field data. By excluding filters with coherent noise features, our method can further attenuate coherent noise and separate ground roll.

A procedure for optimally removing localized coherent noise

Geophysics ◽  
1995 ◽  
Vol 60 (1) ◽  
pp. 191-203 ◽  
Author(s):  
A. Frank Linville ◽  
Robert A. Meek
Keyword(s):  
Seismic Data ◽  
Seismic Profile ◽  
Noise Attenuation ◽  
Signal Distortion ◽  
Coherent Noise ◽  
Vertical Seismic Profile ◽  
Seismic Records ◽  
Signal Distortions ◽  
Notch Filtering ◽  
Phase Differences

Primary reflections in seismic records are often obscured by coherent noise making processing and interpretation difficult. Trapped water modes, surface waves, scattered waves, air waves, and tube waves to name a few, must be removed early in the processing sequence to optimize subsequent processing and imaging. We have developed a noise canceling algorithm that effectively removes many of the commonly encountered noise trains in seismic data. All currently available techniques for coherent noise attenuation suffer from limitations that introduce unacceptable signal distortions and artifacts. Also, most of those techniques impose the dual stringent requirements of equal and fine spatial sampling in the field acquisition of seismic data. Our technique takes advantage of characteristics usually found in coherent noise such as being localized in time, highly aliased, nondispersive (or only mildly so), and exhibit a variety of moveout patterns across the seismic records. When coherent noise is localized in time, a window much like a surgical mute is drawn around the noise. The algorithm derives an estimate of the noise in the window, automatically correcting for amplitude and phase differences, and adaptively subtracts this noise from the window of data. This signal estimate is then placed back in the record. In a model and a land data example, the algorithm removes noise more effectively with less signal distortion than does f-k filtering or velocity notch filtering. Downgoing energy in a vertical seismic profile (VSP) with irregular receiver spacing is also removed.

Noise suppression in 2D and 3D seismic data with data-driven sifting algorithms

Geophysics ◽  
2019 ◽  
Vol 85 (1) ◽  
pp. V1-V10
Author(s):  
Julián L. Gómez ◽  
Danilo R. Velis ◽  
Juan I. Sabbione
Keyword(s):  
Seismic Data ◽  
Noise Suppression ◽  
Department Of Energy ◽  
Time Slice ◽  
3D Seismic ◽  
Coherent Noise ◽  
Data Set ◽  
Amplitude Data ◽  
3D Volume ◽  
2D And 3D

We have developed an empirical-mode decomposition (EMD) algorithm for effective suppression of random and coherent noise in 2D and 3D seismic amplitude data. Unlike other EMD-based methods for seismic data processing, our approach does not involve the time direction in the computation of the signal envelopes needed for the iterative sifting process. Instead, we apply the sifting algorithm spatially in the inline-crossline plane. At each time slice, we calculate the upper and lower signal envelopes by means of a filter whose length is adapted dynamically at each sifting iteration according to the spatial distribution of the extrema. The denoising of a 3D volume is achieved by removing the most oscillating modes of each time slice from the noisy data. We determine the performance of the algorithm by using three public-domain poststack field data sets: one 2D line of the well-known Alaska 2D data set, available from the US Geological Survey; a subset of the Penobscot 3D volume acquired offshore by the Nova Scotia Department of Energy, Canada; and a subset of the Stratton 3D land data from South Texas, available from the Bureau of Economic Geology at the University of Texas at Austin. The results indicate that random and coherent noise, such as footprint signatures, can be mitigated satisfactorily, enhancing the reflectors with negligible signal leakage in most cases. Our method, called empirical-mode filtering (EMF), yields improved results compared to other 2D and 3D techniques, such as [Formula: see text] EMD filter, [Formula: see text] deconvolution, and [Formula: see text]-[Formula: see text]-[Formula: see text] adaptive prediction filtering. EMF exploits the flexibility of EMD on seismic data and is presented as an efficient and easy-to-apply alternative for denoising seismic data with mild to moderate structural complexity.

Predictive removal of scattered noise

Geophysics ◽  
2006 ◽  
Vol 71 (2) ◽  
pp. V41-V49 ◽  
Author(s):  
Gérard C. Herman ◽  
Colin Perkins
Keyword(s):  
Mathematical Model ◽  
Wave Propagation ◽  
Surface Wave ◽  
Seismic Data ◽  
Coherent Noise ◽  
Data Set ◽  
Near Surface ◽  
Unique Data ◽  
Surface Wave Propagation ◽  
Petroleum Development

Land seismic data can be severely contaminated with coherent noise. We discuss a deterministic technique to predict and remove scattered coherent noise from land seismic data based on a mathematical model of near-surface wave propagation. We test the method on a unique data set recorded by Petroleum Development of Oman in the Qarn Alam area (with shots and receivers on the same grid), and we conclude that it effectively reduces scattered noise without smearing reflection energy.

Seismic characterization of a Mississippi Lime resource play in Osage County, Oklahoma, USA

2013 ◽  
Vol 1 (2) ◽  
pp. SB97-SB108 ◽  
Author(s):  
Benjamin L. Dowdell ◽  
J. Tim Kwiatkowski ◽  
Kurt J. Marfurt
Keyword(s):  
Seismic Data ◽  
Seismic Analysis ◽  
High Porosity ◽  
Fracture Density ◽  
Coherent Noise ◽  
High Fracture ◽  
Data Set ◽  
Horizontal Drilling ◽  
Prestack Inversion ◽  
Osage County

With the advent of horizontal drilling and hydraulic fracturing in the Midcontinent, USA, fields once thought to be exhausted are now experiencing renewed exploitation. However, traditional Midcontinent seismic analysis techniques no longer provide satisfactory reservoir characterization for these unconventional plays; new seismic analysis methods are needed to properly characterize these radically innovative play concepts. Time processing and filtering is applied to a raw 3D seismic data set from Osage County, Oklahoma, paying careful attention to velocity analysis, residual statics, and coherent noise filtering. The use of a robust prestack structure-oriented filter and spectral whitening greatly enhances the results. After prestack time migrating the data using a Kirchhoff algorithm, new velocities are picked. A final normal moveout correction is applied using the new velocities, followed by a final prestack structure-oriented filter and spectral whitening. Simultaneous prestack inversion uses the reprocessed and time-migrated seismic data as input, along with a well from within the bounds of the survey. With offsets out to 3048 m and a target depth of approximately 880 m, we can invert for density in addition to P- and S-impedance. Prestack inversion attributes are sensitive to lithology and porosity while surface seismic attributes such as coherence and curvature are sensitive to lateral changes in waveform and structure. We use these attributes in conjunction with interpreted horizontal image logs to identify zones of high porosity and high fracture density.

scholarly journals Coherent noise suppression by learning and analyzing the morphology of the data

Geophysics ◽  
2017 ◽  
Vol 82 (6) ◽  
pp. V397-V411 ◽  
Author(s):  
Pierre Turquais ◽  
Endrias G. Asgedom ◽  
Walter Söllner
Keyword(s):  
Seismic Data ◽  
Noise Suppression ◽  
Morphological Diversity ◽  
Seismic Signal ◽  
Coherent Noise ◽  
Data Set ◽  
Redundant Dictionary ◽  
Manual Search ◽  
Mechanical Noise ◽  
Learned Dictionary

We have developed a method for suppressing coherent noise from seismic data by using the morphological differences between the noise and the signal. This method consists of three steps: First, we applied a dictionary learning method on the data to extract a redundant dictionary in which the morphological diversity of the data is stored. Such a dictionary is a set of unit vectors called atoms that represent elementary patterns that are redundant in the data. Because the dictionary is learned on data contaminated by coherent noise, it is a mix of atoms representing signal patterns and atoms representing noise patterns. In the second step, we separate the noise atoms from the signal atoms using a statistical classification. Hence, the learned dictionary is divided into two subdictionaries: one describing the morphology of the noise and the other one describing the morphology of the signal. Finally, we separate the seismic signal and the coherent noise via morphological component analysis (MCA); it uses sparsity with respect to the two subdictionaries to identify the signal and the noise contributions in the mixture. Hence, the proposed method does not use prior information about the signal and the noise morphologies, but it entirely adapts to the signal and the noise of the data. It does not require a manual search for adequate transforms that may sparsify the signal and the noise, in contrast to existing MCA-based methods. We develop an application of the proposed method for removing the mechanical noise from a marine seismic data set. For mechanical noise that is coherent in space and time, the results show that our method provides better denoising in comparison with the standard FX-Decon, FX-Cadzow, and the curvelet-based denoising methods.

Sign in / Sign up

Export Citation Format

Share Document