Westhazel General Petroleums Pool: Case history of a salt‐dissolution trap in west‐central Saskatchewan, Canada

Geophysics ◽  
1993 ◽  
Vol 58 (6) ◽  
pp. 889-897 ◽  
Author(s):  
Neil L. Anderson ◽  
Dale A. Cederwall

The Westhazel General Petroleums (GP) Pool of west‐central Saskatchewan, Canada, produces from the GP member of the Lower Cretaceous Mannville Group. This reservoir is structurally closed across the updip, eastern dissolutional edge of the underlying Middle Devonian rock salt of the Leofnard Member, Prairie Formation. The leaching of these salts occurred in post‐Mannville time in the Westhazel area and caused the regional southwest dip of the General Petroleums member to be locally reversed. The Westhazel GP Pool, from a geophysical perspective, is characteristic of many of the shallow Lower Cretaceous pools situated along the dissolutional edge of the Prairie salt. The thin, 10 m reservoir facies at Westhazel does not exhibit a diagnostic signature on either seismic or gravity data. Rather, it is the updip edge of the salt across which the reservoir is closed that can be mapped using geophysical techniques. On seismic data, the dissolutional edge of the Prairie salt is characterized by: (1) a subtle decrease in the amplitude and lateral coherency of the underlying Winnipegosis event; (2) a gradual thinning of key encompassing Paleozoic intervals; (3) dip reversal along the Beaverhill Lake (Late Devonian) event; (4) dip reversal along the Mannville (Lower Cretaceous) event; and (5) time‐structural “push down” of Lower Cretaceous and underlying reflections in areas of recent salt dissolution. On the gravity profile, the edge of the salt is manifested as a 1.5 mGal anomaly. The interpretation of both geophysical data sets is consistent with available geologic control.

2020 ◽  
Vol 221 (3) ◽  
pp. 1542-1554 ◽  
Author(s):  
B C Root

SUMMARY Current seismic tomography models show a complex environment underneath the crust, corroborated by high-precision satellite gravity observations. Both data sets are used to independently explore the density structure of the upper mantle. However, combining these two data sets proves to be challenging. The gravity-data has an inherent insensitivity in the radial direction and seismic tomography has a heterogeneous data acquisition, resulting in smoothed tomography models with de-correlation between different models for the mid-to-small wavelength features. Therefore, this study aims to assess and quantify the effect of regularization on a seismic tomography model by exploiting the high lateral sensitivity of gravity data. Seismic tomography models, SL2013sv, SAVANI, SMEAN2 and S40RTS are compared to a gravity-based density model of the upper mantle. In order to obtain similar density solutions compared to the seismic-derived models, the gravity-based model needs to be smoothed with a Gaussian filter. Different smoothening characteristics are observed for the variety of seismic tomography models, relating to the regularization approach in the inversions. Various S40RTS models with similar seismic data but different regularization settings show that the smoothening effect is stronger with increasing regularization. The type of regularization has a dominant effect on the final tomography solution. To reduce the effect of regularization on the tomography models, an enhancement procedure is proposed. This enhancement should be performed within the spectral domain of the actual resolution of the seismic tomography model. The enhanced seismic tomography models show improved spatial correlation with each other and with the gravity-based model. The variation of the density anomalies have similar peak-to-peak magnitudes and clear correlation to geological structures. The resolvement of the spectral misalignment between tomographic models and gravity-based solutions is the first step in the improvement of multidata inversion studies of the upper mantle and benefit from the advantages in both data sets.


1994 ◽  
Vol 34 (1) ◽  
pp. 529 ◽  
Author(s):  
G.W. O'Brien ◽  
C.V. Reeves ◽  
P.R. Milligan ◽  
M.P. Morse ◽  
E.M. Alexander ◽  
...  

The integration of high resolution, image-processed aeromagnetic data with regional geological, magnetic, gravity and seismic data-sets has provided new insights into the structural architecture, rifting history, and petroleum potential of the western onshore and offshore Otway Basin, south-eastern Australia.Three principal structural directions are evident from the magnetic data: NS, NE-ENE and NW-WNW. The structural fabric and regional geological data suggest that the rifting history of the basin may have taken place in two distinct stages, rather than within a simple rift-to-drift framework. The initial stage, from 150 to ~120 Ma, took place within a stress regime dominated by NW-SE extensional transport, similar to that of the basins within the Great Australian Bight to the west. ENE-striking extensional rift segments, such as the Crayfish Platform-Robe Trough and the Torquay Sub-Basin, developed during this period, contemporaneous with the deposition of thick sediments of the Early Cretaceous (Tithonian-Hauterivian) Crayfish Subgroup. In other parts of the basin, NW-striking rift segments, such as the Penola, and perhaps Ardonachie, Troughs onshore, developed within a strongly trans-tensional (left-lateral strike-slip) environment. At ~120 Ma, the regional stress field changed, and the Crayfish Subgroup-aged rift segments were reactivated, with uplift and block faulting extending through to perhaps 117 Ma. Rifting then recommenced at about 117 Ma (contemporaneous with the deposition of the Barremian-Albian Eumeralla Formation), though the extensional transport direction was now oriented NNE-SSW, almost perpendicular to that of the earlier Crayfish Subgroup rift stage. This later rift episode ultimately led to continental breakup at ~96 Ma and produced the 'traditional' normal fault orientations (NW-SE to WNW-ESE) throughout the Otway Basin.


1989 ◽  
Vol 20 (2) ◽  
pp. 25 ◽  
Author(s):  
P.M. Smith ◽  
M. Whitehead

The presence of a large anomalous structure in the northern part of Permit AC/P2 in the Timor Sea has been recognised ever since seismic data were first acquired in the area. Historically, however, sparse seismic coverage has always prevented a detailed and unambiguous interpretation of the complicated structure. In order to overcome this problem, some 2000 km of 3D seismic data were acquired over the feature. In conjunction with this seismic survey, detailed gravity and magnetic data sets were also recorded over the structure.Interpretation of the new seismic data indicated the presence of a piercement structure which is associated with a small negative Bouguer gravity anomaly and a magnetic intensity anomaly resulting from a positive susceptibility contrast. Modelling of the magnetic data indicated that an acidic or intermediate intrusive body was the most likely cause of the piercement structure. The presence of an acidic intrusive body was consistent with the gravity data which indicated that no large density contrast existed between the material of the piercement structure and the surrounding sediments.The combined interpretation of these three data sets was tested by a well, Paqualin-1, drilled on the flank of the piercement structure. The well encountered a thick evaporite sequence with associated thin bands of magnetitie and intermediate igneous rocks. It was logged with a three component downhole magnetic probe and forward magentic modelling work incorporating the results of the magnetic log gave good agreement with the observed aeromagnetic profiles.


2021 ◽  
Author(s):  
Audrey L. Varga ◽  
Matthew R. Chandler ◽  
Worth B. Cotton ◽  
Erik A. Jackson ◽  
Ross J. Markwort ◽  
...  

Abstract Exploration in the Guyana-Suriname Basin has been a decades-long endeavor, including technical challenges and a lengthy history of drilling with no offshore success prior to the Liza discovery. The 1929 New Nickerie well was the first onshore well in Suriname, and was followed by 30 years of dry holes before the heavy-oil Tambaredjo field was discovered in the 1960s. In the 1990s, nearly 40 years after the Tambaredjo discovery, ExxonMobil utilized the 1970s-vintage, poor-to moderate-quality, 2D seismic and gravity data available to create a series of hand-drawn, level-of-maturity (LOM) source and environments-of-deposition (EOD) maps over the basin to move their exploration efforts forward. This work established the genetic fundamentals necessary for understanding the hydrocarbon system and led to negotiation for and capture of the Stabroek Block in 1999. The Liza-1 success in 2015 spurred extensive activity in the Basin by ExxonMobil and the Stabroek Block co-venturers, Hess Guyana Exploration Limited and CNOOC Petroleum Guyana Limited (Austin et al. 2021). The collection of extensive state-of-the art seismic data has been leveraged to enable successful exploration of multiple play types across the Guyana-Suriname Basin. Further data collection, including over 2 km of conventional core and additional seismic data acquisition and processing, has enabled ExxonMobil to adopt interpretation techniques that are applied across the entire basin to characterize and understand the subsurface better. From initial hand-drawn maps to the use of advanced technology today, ExxonMobil's work in the Guyana-Suriname Basin has relied on integration of geologic and geophysical understanding as well as the ability to leverage new technology to continue a successful exploration program with 8 billion barrels discovered to date.


2021 ◽  
Vol 95 (2) ◽  
Author(s):  
Mirjam Bilker-Koivula ◽  
Jaakko Mäkinen ◽  
Hannu Ruotsalainen ◽  
Jyri Näränen ◽  
Timo Saari

AbstractPostglacial rebound in Fennoscandia causes striking trends in gravity measurements of the area. We present time series of absolute gravity data collected between 1976 and 2019 on 12 stations in Finland with different types of instruments. First, we determine the trends at each station and analyse the effect of the instrument types. We estimate, for example, an offset of 6.8 μgal for the JILAg-5 instrument with respect to the FG5-type instruments. Applying the offsets in the trend analysis strengthens the trends being in good agreement with the NKG2016LU_gdot model of gravity change. Trends of seven stations were found robust and were used to analyse the stabilization of the trends in time and to determine the relationship between gravity change rates and land uplift rates as measured with global navigation satellite systems (GNSS) as well as from the NKG2016LU_abs land uplift model. Trends calculated from combined and offset-corrected measurements of JILAg-5- and FG5-type instruments stabilized in 15 to 20 years and at some stations even faster. The trends of FG5-type instrument data alone stabilized generally within 10 years. The ratio between gravity change rates and vertical rates from different data sets yields values between − 0.206 ± 0.017 and − 0.227 ± 0.024 µGal/mm and axis intercept values between 0.248 ± 0.089 and 0.335 ± 0.136 µGal/yr. These values are larger than previous estimates for Fennoscandia.


2021 ◽  
Author(s):  
Adam Cygal ◽  
Michał Stefaniuk ◽  
Anna Kret

AbstractThis article presents the results of an integrated interpretation of measurements made using Audio-Magnetotellurics and Seismic Reflection geophysical methods. The obtained results were used to build an integrated geophysical model of shallow subsurface cover consisting of Cenozoic deposits, which then formed the basis for a detailed lithological and tectonic interpretation of deeper Mesozoic sediments. Such shallow covers, consisting mainly of glacial Pleistocene deposits, are typical for central and northern Poland. This investigation concentrated on delineating the accurate geometry of Obrzycko Cenozoic graben structure filled with loose deposits, as it was of great importance to the acquisition, processing and interpretation of seismic data that was to reveal the tectonic structure of the Cretaceous and Jurassic sediments which underly the study area. Previously, some problems with estimation of seismic static corrections over similar grabens filled with more recent, low-velocity deposits were encountered. Therefore, a novel approach to estimating the exact thickness of such shallow cover consisting of low-velocity deposits was applied in the presented investigation. The study shows that some alternative geophysical data sets (such as magnetotellurics) can be used to significantly improve the imaging of geological structure in areas where seismic data are very distorted or too noisy to be used alone


2021 ◽  
Vol 11 (14) ◽  
pp. 6363
Author(s):  
Muhammad Noor Amin Zakariah ◽  
Norsyafina Roslan ◽  
Norasiah Sulaiman ◽  
Sean Cheong Heng Lee ◽  
Umar Hamzah ◽  
...  

Gravity survey is one of the passive geophysical techniques commonly used to delineate geological formations, especially in determining basement rock and the overlying deposit. Geologically, the study area is made up of thick quaternary alluvium deposited on top of the older basement rock. The Muda River basin constitutes, approximately, of more than 300 m of thick quaternary alluvium overlying the unknown basement rock type. Previous studies, including drilling and geo-electrical resistivity surveys, were conducted in the area but none of them managed to conclusively determine the basement rock type and depth precisely. Hence, a regional gravity survey was conducted to determine the thickness of the quaternary sediments prior to assessing the sustainability of the Muda River basin. Gravity readings were made at 347 gravity stations spaced at 3–5 km intervals using Scintrex CG-3 covering an area and a perimeter of 9000 km2 and 730 km, respectively. The gravity data were then conventionally reduced for drift, free air, latitude, Bouguer, and terrain corrections. These data were then consequently analyzed to generate Bouguer, regional and total horizontal derivative (THD) anomaly maps for qualitative and quantitative interpretations. The Bouguer gravity anomaly map shows low gravity values in the north-eastern part of the study area interpreted as representing the Main Range granitic body, while relatively higher gravity values observed in the south-western part are interpreted as representing sedimentary rocks of Semanggol and Mahang formations. Patterns observed in the THD anomaly and Euler deconvolution maps closely resembled the presence of structural features such as fault lineaments dominantly trending along NW-SE and NE-SW like the trends of topographic lineaments in the study area. Based on power spectral analysis of the gravity data, the average depth of shallow body, representing alluvium, and deep body, representing underlying rock formations, are 0.5 km and 1.2 km, respectively. The thickness of Quaternary sediment and the depth of sedimentary formation can be more precisely estimated by other geophysical techniques such as the seismic reflection survey.


2020 ◽  
Vol 94 (9) ◽  
Author(s):  
Lars E. Sjöberg

Abstract As the KTH method for geoid determination by combining Stokes integration of gravity data in a spherical cap around the computation point and a series of spherical harmonics suffers from a bias due to truncation of the data sets, this method is based on minimizing the global mean square error (MSE) of the estimator. However, if the harmonic series is increased to a sufficiently high degree, the truncation error can be considered as negligible, and the optimization based on the local variance of the geoid estimator makes fair sense. Such unbiased types of estimators, derived in this article, have the advantage to the MSE solutions not to rely on the imperfectly known gravity signal degree variances, but only the local error covariance matrices of the observables come to play. Obviously, the geoid solution defined by the local least variance is generally superior to the solution based on the global MSE. It is also shown, at least theoretically, that the unbiased geoid solutions based on the KTH method and remove–compute–restore technique with modification of Stokes formula are the same.


Sign in / Sign up

Export Citation Format

Share Document