Vertical seismic profiling depth migration of a salt dome flank

Geophysics ◽  
1986 ◽  
Vol 51 (5) ◽  
pp. 1087-1109 ◽  
Author(s):  
N. D. Whitmore ◽  
Larry R. Lines
Keyword(s):  
Data Processing ◽  
Survey Design ◽  
Velocity Model ◽  
Salt Dome ◽  
Velocity Estimation ◽  
Seismic Profiles ◽  
Depth Migration ◽  
Vertical Seismic Profiles ◽  
Interval Velocity ◽  
Vsp Data

Vertical seismic profiles (VSPs) can supply information about both velocity and subsurface interface locations. Properly designed VSPs can be used to map steeply dipping interfaces such as salt dome flanks. Mapping subsurface interfaces with VSP data requires careful survey design, appropriate data processing, interval velocity estimation, and reflector mapping. The first of these four ingredients is satisfied, in most cases, by preacquisition modeling. The second is accomplished by careful data processing. Initial velocity estimates are provided by seismic tomography. Velocity‐model refinement is accomplished by a combination of iterative modeling and iterative least‐squares inversion. Finally, the resultant interval velocities are used in depth migration of the processed VSP. These four ingredients have been combined to map a salt dome flank.

Applying the Horizon Based Tomography Method to Update Interval Velocity Model, Identify The Structure of Pre-Stack Depth Migration 3D and Estimate The Hydrocarbon Reserve In SBI Field of North West Java Basin

2014 ◽  
Vol 69 (6) ◽  
Author(s):  
Sudra Irawan ◽  
Sismanto Sismanto ◽  
Adang Sukmatiawan
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Velocity Model ◽  
Research Area ◽  
Seismic Data Processing ◽  
West Java ◽  
North West ◽  
Depth Migration ◽  
Interval Velocity ◽  
Tomography Method

Seismic data processing is one of the three stages in the seismic method that has an important role in the exploration of oil and gas. Without good data processing, it is impossible to get seismic image cross section for good interpretation. A research using seismic data processing was done to update the velocity model by horizon based tomography method in SBI Field, North West Java Basin. This method reduces error of seismic wave travel time through the analyzed horizon because the existence velocity of high lateral variation in research area. There are three parameters used to determine the accuracy of the resulting interval velocity model, namely, flat depth gathers, semblance residual moveout that coincides with the axis zero residual moveout, and the correspondence between image depth (horizon) with wells marker  (well seismic tie). Pre Stack Depth Migration (PSDM) form interval velocity model and updating using horizon-based tomography method gives better imaging of under-surfaced structure results than PSDM before using tomography. There are three faults found in the research area, two normal faults have southwest-northeast strike and the other has northwest-southeast strike. The thickness of reservoir in SBI field, North West Java Basin, is predicted between 71 to 175 meters and the hydrocarbon (oil) reserve is predicted about  with 22.6% porosity and 70.7% water saturation. 

Integrated prestack depth migration of vertical seismic profile and surface seismic data from the Rocky Mountain Foothills of southern Alberta, Canada

Geophysics ◽  
2003 ◽  
Vol 68 (6) ◽  
pp. 1782-1791 ◽  
Author(s):  
M. Graziella Kirtland Grech ◽  
Don C. Lawton ◽  
Scott Cheadle
Keyword(s):  
Seismic Data ◽  
Rocky Mountain ◽  
Velocity Model ◽  
Seismic Profile ◽  
Vertical Seismic Profile ◽  
Prestack Depth Migration ◽  
Data Set ◽  
Depth Migration ◽  
Southern Alberta ◽  
Vsp Data

We have developed an anisotropic prestack depth migration code that can migrate either vertical seismic profile (VSP) or surface seismic data. We use this migration code in a new method for integrated VSP and surface seismic depth imaging. Instead of splicing the VSP image into the section derived from surface seismic data, we use the same migration algorithm and a single velocity model to migrate both data sets to a common output grid. We then scale and sum the two images to yield one integrated depth‐migrated section. After testing this method on synthetic surface seismic and VSP data, we applied it to field data from a 2D surface seismic line and a multioffset VSP from the Rocky Mountain Foothills of southern Alberta, Canada. Our results show that the resulting integrated image exhibits significant improvement over that obtained from (a) the migration of either data set alone or (b) the conventional splicing approach. The integrated image uses the broader frequency bandwidth of the VSP data to provide higher vertical resolution than the migration of the surface seismic data. The integrated image also shows enhanced structural detail, since no part of the surface seismic section is eliminated, and good event continuity through the use of a single migration–velocity model, obtained by an integrated interpretation of borehole and surface seismic data. This enhanced migrated image enabled us to perform a more robust interpretation with good well ties.

scholarly journals Seismic velocity estimation: A deep recurrent neural-network approach

Geophysics ◽  
2019 ◽  
Vol 85 (1) ◽  
pp. U21-U29
Author(s):  
Gabriel Fabien-Ouellet ◽  
Rahul Sarkar
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Recurrent Neural Networks ◽  
Model Building ◽  
Seismic Velocity ◽  
Velocity Model ◽  
Velocity Estimation ◽  
Interval Velocity ◽  
Velocity Model Building ◽  
3D Velocity Model

Applying deep learning to 3D velocity model building remains a challenge due to the sheer volume of data required to train large-scale artificial neural networks. Moreover, little is known about what types of network architectures are appropriate for such a complex task. To ease the development of a deep-learning approach for seismic velocity estimation, we have evaluated a simplified surrogate problem — the estimation of the root-mean-square (rms) and interval velocity in time from common-midpoint gathers — for 1D layered velocity models. We have developed a deep neural network, whose design was inspired by the information flow found in semblance analysis. The network replaces semblance estimation by a representation built with a deep convolutional neural network, and then it performs velocity estimation automatically with recurrent neural networks. The network is trained with synthetic data to identify primary reflection events, rms velocity, and interval velocity. For a synthetic test set containing 1D layered models, we find that rms and interval velocity are accurately estimated, with an error of less than [Formula: see text] for the rms velocity. We apply the neural network to a real 2D marine survey and obtain accurate rms velocity predictions leading to a coherent stacked section, in addition to an estimation of the interval velocity that reproduces the main structures in the stacked section. Our results provide strong evidence that neural networks can estimate velocity from seismic data and that good performance can be achieved on real data even if the training is based on synthetics. The findings for the 1D problem suggest that deep convolutional encoders and recurrent neural networks are promising components of more complex networks that can perform 2D and 3D velocity model building.

Redatuming through a salt canopy and target-oriented salt-flank imaging

Geophysics ◽  
2008 ◽  
Vol 73 (3) ◽  
pp. S63-S71 ◽  
Author(s):  
Rongrong Lu ◽  
Mark Willis ◽  
Xander Campman ◽  
Jonathan Ajo-Franklin ◽  
M. Nafi Toksöz
Keyword(s):  
Velocity Gradient ◽  
Model Building ◽  
Velocity Structure ◽  
Velocity Model ◽  
Seismic Profile ◽  
Velocity Estimation ◽  
Reverse Time ◽  
Estimation Model ◽  
Depth Migration ◽  
Prestack Migration

We describe a new shortcut strategy for imaging the sediments and salt edge around a salt flank through an overburden salt canopy. We tested its performance and capabilities on 2D synthetic acoustic seismic data from a Gulf of Mexico style model. We first redatumed surface shots, using seismic interferometry, from a walkaway vertical seismic profile survey as if the source and receiver pairs had been located in the borehole at the positions of the receivers. This process creates effective downhole shot gathers by completely moving surface shots through the salt canopy, without any knowledge of overburden velocity structure. After redatuming, we can apply multiple passes of prestack migration from the reference datum of the bore-hole. In our example, first-pass migration, using only a simple vertical velocity gradient model, reveals the outline of the salt edge. A second pass of reverse-time, prestack depth migration using full two-way wave equation was performed with an updated velocity model that consisted of the velocity gradient and salt dome. The second-pass migration brings out dipping sediments abutting the salt flank because these reflectors were illuminated by energy that bounced off the salt flank, forming prismatic reflections. In this target-oriented strategy, the computationally fast redatuming process eliminates the need for the traditional complex process of velocity estimation, model building, and iterative depth migration to remove effects of the salt canopy and surrounding overburden. This might allow this strategy to be used in the field in near real time.

Velocity estimation by beam stack

Geophysics ◽  
1992 ◽  
Vol 57 (8) ◽  
pp. 1034-1047 ◽  
Author(s):  
Biondo Biondi
Keyword(s):  
Estimation Method ◽  
Velocity Model ◽  
Velocity Estimation ◽  
Gradient Algorithm ◽  
Stratified Medium ◽  
Detailed Knowledge ◽  
Low Velocity ◽  
Velocity Anomaly ◽  
Interval Velocity ◽  
Lateral Variations

Imaging seismic data requires detailed knowledge of the propagation velocity of compressional waves in the subsurface. In conventional seismic processing, the interval velocity model is usually derived from stacking velocities. Stacking velocities are determined by measuring the coherency of the reflections along hyperbolic moveout trajectories in offset. This conventional method becomes inaccurate in geologically complex areas because the conversion of stacking velocities to interval velocities assumes a horizontally stratified medium and mild lateral variations in velocity. The tomographic velocity estimation proposed in this paper can be applied when there are dipping reflectors and strong lateral variations. The method is based on the measurements of moveouts by beam stacks. A beam stack measures local coherency of reflections along hyperbolic trajectories. Because it is a local operator, the beam stack can provide information on nonhyperbolic moveouts in the data. This information is more reliable than traveltimes of reflections picked directly from the data because many seismic traces are used for computing beam stacks. To estimate interval velocity, I iteratively search for the velocity model that best predicts the events in beam‐stacked data. My estimation method does not require a preliminary picking of the data because it directly maximizes the beam‐stack’s energy at the traveltimes and surface locations predicted by ray tracing. The advantage of this formulation is that detection of the events in the beam‐stacked data can be guided by the imposition of smoothness constraints on the velocity model. The optimization problem of maximizing beam‐stack energy is solved by a gradient algorithm. To compute the derivatives of the objective function with respect to the velocity model, I derive a linear operator that relates perturbations in velocity to the observed changes in the beam‐stack kinematics. The method has been successfully applied to a marine survey for estimating a low‐velocity anomaly. The estimated velocity function correctly predicts the nonhyperbolic moveouts in the data caused by the velocity anomaly.

Wave-equation migration velocity analysis by focusing diffractions and reflections

Geophysics ◽  
2005 ◽  
Vol 70 (3) ◽  
pp. U19-U27 ◽  
Author(s):  
Paul C. Sava ◽  
Biondo Biondi ◽  
John Etgen
Keyword(s):  
Wave Equation ◽  
Migration Velocity ◽  
Velocity Estimation ◽  
Velocity Analysis ◽  
Depth Migration ◽  
Interval Velocity ◽  
Migration Velocity Analysis ◽  
Inversion Procedure ◽  
Velocity Information ◽  
Zero Offset

We propose a method for estimating interval velocity using the kinematic information in defocused diffractions and reflections. We extract velocity information from defocused migrated events by analyzing their residual focusing in physical space (depth and midpoint) using prestack residual migration. The results of this residual-focusing analysis are fed to a linearized inversion procedure that produces interval velocity updates. Our inversion procedure uses a wavefield-continuation operator linking perturbations of interval velocities to perturbations of migrated images, based on the principles of wave-equation migration velocity analysis introduced in recent years. We measure the accuracy of the migration velocity using a diffraction-focusing criterion instead of the criterion of flatness of migrated common-image gathers that is commonly used in migration velocity analysis. This new criterion enables us to extract velocity information from events that would be challenging to use with conventional velocity analysis methods; thus, our method is a powerful complement to those conventional techniques. We demonstrate the effectiveness of the proposed methodology using two examples. In the first example, we estimate interval velocity above a rugose salt top interface by using only the information contained in defocused diffracted and reflected events present in zero-offset data. By comparing the results of full prestack depth migration before and after the velocity updating, we confirm that our analysis of the diffracted events improves the velocity model. In the second example, we estimate the migration velocity function for a 2D, zero-offset, ground-penetrating radar data set. Depth migration after the velocity estimation improves the continuity of reflectors while focusing the diffracted energy.

Twelve years of vertical birefringence in nine‐component VSP data

Geophysics ◽  
2001 ◽  
Vol 66 (2) ◽  
pp. 582-597 ◽  
Author(s):  
Donald F. Winterstein ◽  
Gopa S. De ◽  
Mark A. Meadows
Keyword(s):  
Seismic Data ◽  
Azimuthal Anisotropy ◽  
Vertical Shear ◽  
S Wave ◽  
Seismic Profiles ◽  
Surface Reflection ◽  
Vertical Seismic Profiles ◽  
Reflection Seismic ◽  
San Andreas ◽  
Vsp Data

Since 1986, when industry scientists first publicly showed data supporting the presence of azimuthal anisotropy in sedimentary rock, we have studied vertical shear‐wave (S-wave) birefringence in 23 different wells in western North America. The data were from nine‐component vertical seismic profiles (VSPs) supplemented in recent years with data from wireline crossed‐dipole logs. This paper summarizes our results, including birefringence results in tabular form for 54 depth intervals in 19 of those 23 wells. In the Appendix we present our conclusions about how to record VSP data optimally for study of vertical birefringence. We arrived at four principal conclusions about vertical S-wave birefringence. First, birefringence was common but not universal. Second, birefringence ranged from 0–21%, but values larger than 4% occurred only in shallow formations (<1200 m) within 40 km of California’s San Andreas fault. Third, at large scales birefringence tended to be blocky. That is, both the birefringence magnitude and the S-wave polarization azimuth were often consistent over depth intervals of several tens to hundreds of meters but then changed abruptly, sometimes by large amounts. Birefringence in some instances diminished with depth and in others increased with depth, but in almost every case a layer near the surface was more birefringent than the layer immediately below it. Fourth, observed birefringence patterns generally do not encourage use of multicomponent surface reflection seismic data for finding fractured hydrocarbon reservoirs, but they do encourage use of crossed‐dipole logs to examine them. That is, most reservoirs were birefringent, but none we studied showed increased birefringence confined to the reservoir.

Measurements of attenuation from vertical seismic profiles by iterative modeling

Geophysics ◽  
1985 ◽  
Vol 50 (6) ◽  
pp. 931-949 ◽  
Author(s):  
Michel Dietrich ◽  
Michel Bouchon
Keyword(s):  
Velocity Dispersion ◽  
Synthetic Data ◽  
Layered Media ◽  
Spectral Ratio ◽  
Ratio Method ◽  
Seismic Profiles ◽  
Vertical Seismic Profiles ◽  
Anelastic Attenuation ◽  
Vsp Data ◽  
Intrinsic Dissipation

We present a numerical simulation of vertical seismic profiles (VSP) using the discrete horizontal wavenumber representation of seismic wave fields. The theoretical seismograms are computed in the acoustic case for flat layered media, and they include the effects of absorption and velocity dispersion. A study using the synthetic seismograms was conducted to investigate the accuracy and resolution of attenuation measurements from VSP data. It is shown that in finely layered media estimates of the anelastic attenuation obtained by use of the reduced spectral ratio method are usually inaccurate when the attenuation is measured over a small vertical extent. An iterative method is presented which improves the resolution of the measurements of intrinsic dissipation. This method allows determination for synthetic data of the quality factor over depth intervals of about one wavelength of the dominant seismic frequency.

Sign in / Sign up

Export Citation Format

Share Document