Velocity anisotropy of shales and depth estimation in the North Sea basin

Geophysics ◽  
1984 ◽  
Vol 49 (9) ◽  
pp. 1411-1419 ◽  
Author(s):  
N. C. Banik
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
Depth Estimation ◽  
Data Sets ◽  
Well Log ◽  
Simple Method ◽  
Velocity Anisotropy ◽  
Interval Velocity ◽  
The North ◽  
The North Sea

It is known that in the North Sea basin the depths to major reflectors as determined from surface seismic data are often larger than the well‐log depths. From a study of data sets which tie 21 wells, I found a strong correlation between the occurrence of the depth error and the presence of shales in the subsurface. Assuming that the error is caused by elliptical velocity anisotropy in shales, I measured the anisotropy from a comparison of the well‐log sonic data and the interval velocity profile obtained from the surface seismic data and also from a comparison of the seismic depth and the well‐log depth. It was found that the two methods of measurements agree with each other and also agree qualitatively with the previous laboratory measurements of anisotropy in shale samples. The results strongly suggest that the depth anomaly in the North Sea basin is caused by the velocity anisotropy of shales. A simple method to correct the seismic depth is given.

Imaging the sea surface using a dual-sensor towed streamer

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. V111-V118 ◽  
Author(s):  
Okwudili Orji ◽  
Walter Söllner ◽  
Leiv Jacob Gelius
Keyword(s):  
Seismic Data ◽  
Time Window ◽  
Finite Difference Methods ◽  
Surface Profile ◽  
Sea Surface ◽  
Data Sets ◽  
The North ◽  
Dual Sensor ◽  
The North Sea ◽  
Time Invariant

Sea-surface profile and reflection coefficient estimates are vital input parameters to various seismic data processing applications. The common assumption of a flat sea surface when processing seismic data can lead to misinterpretations and mislocations of events. A new method of imaging the sea surface from decomposed wavefields has been developed. Wavefield separation is applied to the data acquired by a towed dual-sensor streamer containing collocated pressure and vertical particle velocity sensors to obtain upgoing and downgoing wavefields of the related sensors. Time-gated upgoing and downgoing wavefields corresponding to a given sensor are then extrapolated to the sea surface where an imaging condition is applied so that the time-invariant shape of the sea surface can be recovered. By sliding the data time-window, the temporal changes of the sea surface can be correspondingly estimated. Ray tracing and finite-difference methods were used to generate different controlled data sets used in this feasibility study to demonstrate the imaging principle and to test the image accuracy. The method was also tested on a first field data example of a marginal weather line from the North Sea.

Quaternary evolution of the northern North Sea

2020 ◽  
Author(s):  
Christine Batchelor ◽  
Dag Ottesen ◽  
Benjamin Bellwald ◽  
Sverre Planke ◽  
Helge Løseth ◽  
...  
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
3D Seismic ◽  
Quaternary Sediments ◽  
The North ◽  
The North Sea ◽  
Data Coverage ◽  
Northern North Sea ◽  
2D And 3D ◽  
3D Seismic Data

<p>The North Sea has arguably the most extensive geophysical data coverage of any glacier-influenced sedimentary regime on Earth, enabling detailed investigation of the thick (up to 1 km) sequence of Quaternary sediments that is preserved within the North Sea Basin. At the start of the Quaternary, the bathymetry of the northern North Sea was dominated by a deep depression that provided accommodation for sediment input from the Norwegian mainland and the East Shetland Platform. Here we use an extensive database of 2D and 3D seismic data to investigate the geological development of the northern North Sea through the Quaternary.</p><p>Three main sedimentary processes were dominant within the northern North Sea during the early Quaternary: 1) the delivery and associated basinward transfer of glacier-derived sediments from an ice mass centred over mainland Norway; 2) the delivery of fluvio-deltaic sediments from the East Shetland Platform; and 3) contourite deposition and the reworking of sediments by contour currents. The infilling of the North Sea Basin during the early Quaternary increased the width and reduced the water depth of the continental shelf, facilitating the initiation of the Norwegian Channel Ice Stream.</p>

Extensive, Gas-charged Quaternary Sand Accumulations of the Northern North Sea and North Sea Fan

2020 ◽  
Author(s):  
Benjamin Bellwald ◽  
Sverre Planke ◽  
Sunil Vadakkepuliyambatta ◽  
Stefan Buenz ◽  
Christine Batchelor ◽  
...  
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
Data Sets ◽  
3D Seismic ◽  
Fine Grained ◽  
The North ◽  
Northern North Sea ◽  
Well Data ◽  
Sea Fan ◽  
3D Seismic Data

<p>Sediments deposited by marine-based ice sheets are dominantly fine-grained glacial muds, which are commonly known for their sealing properties for migrating fluids. However, the Peon and Aviat hydrocarbon discoveries in the North Sea show that coarse-grained glacial sands can occur over large areas in formerly glaciated continental shelves. In this study, we use conventional and high-resolution 2D and 3D seismic data combined with well information to present new models for large-scale fluid accumulations within the shallow subsurface of the Norwegian Continental Shelf. The data include 48,000 km<sup>2</sup> of high-quality 3D seismic data and 150 km<sup>2</sup> of high-resolution P-Cable 3D seismic data, with a vertical resolution of 2 m and a horizontal resolution of 6 to 10 m in these data sets. We conducted horizon picking, gridding and attribute extractions as well as seismic geomorphological interpretation, and integrated the results obtained from the seismic interpretation with existing well data.</p><p>The thicknesses of the Quaternary deposits vary from hundreds of meters of subglacial till in the Northern North Sea to several kilometers of glacigenic sediments in the North Sea Fan. Gas-charged, sandy accumulations are characterized by phase-reserved reflections with anomalously high amplitudes in the seismic data as well as density and velocity decreases in the well data. Extensive (>10 km<sup>2</sup>) Quaternary sand accumulations within this package include (i) glacial sands in an ice-marginal outwash fan, sealed by stiff glacial tills deposited by repeated glaciations (the Peon discovery in the Northern North Sea), (ii) sandy channel-levee systems sealed by fine-grained mud within sequences of glacigenic debris flows, formed during shelf-edge glaciations, (iii) fine-grained glacimarine sands of contouritic origin sealed by gas hydrates, and (iv) remobilized oozes above large evacuation craters and sealed by megaslides and glacial muds. The development of the Fennoscandian Ice Sheet resulted in a rich variety of depositional environments with frequently changing types and patterns of glacial sedimentation. Extensive new 3D seismic data sets are crucial to correctly interpret glacial processes and to analyze the grain sizes of the related deposits. Furthermore, these data sets allow the identification of localized extensive fluid accumulations within the Quaternary succession and distinguish stratigraphic levels favorable for fluid accumulations from layers acting as fluid barriers.</p>

High-resolution reservoir characterization by an acoustic impedance inversion of a Tertiary deltaic clinoform system in the North Sea

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. O57-O67 ◽  
Author(s):  
Daria Tetyukhina ◽  
Lucas J. van Vliet ◽  
Stefan M. Luthi ◽  
Kees Wapenaar
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
Reservoir Characterization ◽  
Structural Information ◽  
Sampling Rate ◽  
Seismic Inversion ◽  
Acoustic Properties ◽  
The North ◽  
The North Sea ◽  
Well Data

Fluvio-deltaic sedimentary systems are of great interest for explorationists because they can form prolific hydrocarbon plays. However, they are also among the most complex and heterogeneous ones encountered in the subsurface, and potential reservoir units are often close to or below seismic resolution. For seismic inversion, it is therefore important to integrate the seismic data with higher resolution constraints obtained from well logs, whereby not only the acoustic properties are used but also the detailed layering characteristics. We have applied two inversion approaches for poststack, time-migrated seismic data to a clinoform sequence in the North Sea. Both methods are recursive trace-based techniques that use well data as a priori constraints but differ in the way they incorporate structural information. One method uses a discrete layer model from the well that is propagated laterally along the clinoform layers, which are modeled as sigmoids. The second method uses a constant sampling rate from the well data and uses horizontal and vertical regularization parameters for lateral propagation. The first method has a low level of parameterization embedded in a geologic framework and is computationally fast. The second method has a much higher degree of parameterization but is flexible enough to detect deviations in the geologic settings of the reservoir; however, there is no explicit geologic significance and the method is computationally much less efficient. Forward seismic modeling of the two inversion results indicates a good match of both methods with the actual seismic data.

scholarly journals Geophysical imaging of porosity variations in the Danish North Sea chalk

2008 ◽  
Vol 15 ◽  
pp. 17-20 ◽  
Author(s):  
Tanni Abramovitz
Keyword(s):  
North Sea ◽  
Seismic Reflection ◽  
Seismic Inversion ◽  
Rock Properties ◽  
Well Log ◽  
Reservoir Properties ◽  
Seismic Reflection Data ◽  
Log Data ◽  
The North ◽  
The North Sea

More than 80% of the present-day oil and gas production in the Danish part of the North Sea is extracted from fields with chalk reservoirs of late Cretaceous (Maastrichtian) and early Paleocene (Danian) ages (Fig. 1). Seismic reflection and in- version data play a fundamental role in mapping and characterisation of intra-chalk structures and reservoir properties of the Chalk Group in the North Sea. The aim of seismic inversion is to transform seismic reflection data into quantitative rock properties such as acoustic impedance (AI) that provides information on reservoir properties enabling identification of porosity anomalies that may constitute potential reservoir compartments. Petrophysical analyses of well log data have shown a relationship between AI and porosity. Hence, AI variations can be transformed into porosity variations and used to support detailed interpretations of porous chalk units of possible reservoir quality. This paper presents an example of how the chalk team at the Geological Survey of Denmark and Greenland (GEUS) integrates geological, geophysical and petrophysical information, such as core data, well log data, seismic 3-D reflection and AI data, when assessing the hydrocarbon prospectivity of chalk fields.

Sign in / Sign up

Export Citation Format

Share Document