The influence of out‐of‐plane surface properties on unmigrated time sections

Geophysics ◽  
1983 ◽  
Vol 48 (2) ◽  
pp. 125-132 ◽  
Author(s):  
Jack K. Cohen ◽  
Norman Bleistein
Keyword(s):  
Seismic Data ◽  
High Frequency ◽  
Plane Surface ◽  
Specular Reflection ◽  
Scattered Wave ◽  
Principal Curves ◽  
Reflection Point ◽  
Numerical Examples ◽  
Out Of Plane ◽  
Seismic Sections

Both analytic and numerical means are used to demonstrate amplitude and phase behavior of reflections from three‐dimensionally curved interfaces. In particular, the high‐frequency geometrical optics approximation for the backward scattered wave field demonstrates that the phase of a reflection from a syncline is determined by the (in general, different) positions of focal regions for the two principal curves at the specular reflection point. Thus the amplitudes and phases of events observed on seismic sections are influenced as much by the shape of the reflector “out‐of‐the‐plane” as by the shape in the plane of the section. Results of the numerical examples suggest possible pitfalls in traditional interpretation of two‐dimensional seismic data.

scholarly journals Tutorial: Spectral bandwidth extension — Invention versus harmonic extrapolation

Geophysics ◽  
2017 ◽  
Vol 82 (4) ◽  
pp. W1-W16 ◽  
Author(s):  
Chen Liang ◽  
John Castagna ◽  
Ricardo Zavala Torres
Keyword(s):  
Seismic Data ◽  
High Frequency ◽  
Low Frequency ◽  
Original Data ◽  
Spectral Bandwidth ◽  
Bandwidth Extension ◽  
Seismic Resolution ◽  
Earth Structures ◽  
Seismic Sections ◽  
Phase Acceleration

Various postprocessing methods can be applied to seismic data to extend the spectral bandwidth and potentially increase the seismic resolution. Frequency invention techniques, including phase acceleration and loop reconvolution, produce spectrally broadened seismic sections but arbitrarily create high frequencies without a physical basis. Tests in extending the bandwidth of low-frequency synthetics using these methods indicate that the invented frequencies do not tie high-frequency synthetics generated from the same reflectivity series. Furthermore, synthetic wedge models indicate that the invented high-frequency seismic traces do not improve thin-layer resolution. Frequency invention outputs may serve as useful attributes, but they should not be used for quantitative work and do not improve actual resolution. On the other hand, under appropriate circumstances, layer frequency responses can be extrapolated to frequencies outside the band of the original data using spectral periodicities determined from within the original seismic bandwidth. This can be accomplished by harmonic extrapolation. For blocky earth structures, synthetic tests show that such spectral extrapolation can readily double the bandwidth, even in the presence of noise. Wedge models illustrate the resulting resolution improvement. Synthetic tests suggest that the more complicated the earth structure, the less valid the bandwidth extension that harmonic extrapolation can achieve. Tests of the frequency invention methods and harmonic extrapolation on field seismic data demonstrate that (1) the frequency invention methods modify the original seismic band such that the original data cannot be recovered by simple band-pass filtering, whereas harmonic extrapolation can be filtered back to the original band with good fidelity and (2) harmonic extrapolation exhibits acceptable ties between real and synthetic seismic data outside the original seismic band, whereas frequency invention methods have unfavorable well ties in the cases studied.

scholarly journals A New Method to Extract CSP Gather of Topography for Scattered Wave Imaging

2017 ◽  
Vol 2017 ◽  
pp. 1-7
Author(s):  
Zhao Pan ◽  
Zhang Mei-gen
Keyword(s):  
Conventional Method ◽  
Seismic Data ◽  
Scattered Wave ◽  
Earth Surface ◽  
Numerical Examples ◽  
The Earth ◽  
Imaging Result ◽  
Wave Imaging ◽  
The Common ◽  
Rugged Surface

The seismic method is one of the major geophysical tools to study the structure of the earth. The extraction of the common scatter point (CSP) gather is a critical step to accomplish the seismic imaging with a scattered wave. Conventionally, the CSP gather is obtained with the assumption that the earth surface is horizontal. However, errors are introduced to the final imaging result if the seismic traces obtained at the rugged surface are processed using the conventional method. Hence, we propose the method of the extraction of the CSP gather for the seismic data collected at the rugged surface. The proposed method is validated by two numerical examples and expected to reduce the effect of the topography on the scattered wave imaging.

scholarly journals Pitfalls and limitations in seismic attribute interpretation of tectonic features

2015 ◽  
Vol 3 (1) ◽  
pp. SB5-SB15 ◽  
Author(s):  
Kurt J. Marfurt ◽  
Tiago M. Alves
Keyword(s):  
Seismic Data ◽  
Seismic Attributes ◽  
Seismic Attribute ◽  
3D Data ◽  
Amplitude Data ◽  
Seismic Sections ◽  
Push Down ◽  
Data Coherence ◽  
Level Of Experience ◽  
Tectonic Features

Seismic attributes are routinely used to accelerate and quantify the interpretation of tectonic features in 3D seismic data. Coherence (or variance) cubes delineate the edges of megablocks and faulted strata, curvature delineates folds and flexures, while spectral components delineate lateral changes in thickness and lithology. Seismic attributes are at their best in extracting subtle and easy to overlook features on high-quality seismic data. However, seismic attributes can also exacerbate otherwise subtle effects such as acquisition footprint and velocity pull-up/push-down, as well as small processing and velocity errors in seismic imaging. As a result, the chance that an interpreter will suffer a pitfall is inversely proportional to his or her experience. Interpreters with a history of making conventional maps from vertical seismic sections will have previously encountered problems associated with acquisition, processing, and imaging. Because they know that attributes are a direct measure of the seismic amplitude data, they are not surprised that such attributes “accurately” represent these familiar errors. Less experienced interpreters may encounter these errors for the first time. Regardless of their level of experience, all interpreters are faced with increasingly larger seismic data volumes in which seismic attributes become valuable tools that aid in mapping and communicating geologic features of interest to their colleagues. In terms of attributes, structural pitfalls fall into two general categories: false structures due to seismic noise and processing errors including velocity pull-up/push-down due to lateral variations in the overburden and errors made in attribute computation by not accounting for structural dip. We evaluate these errors using 3D data volumes and find areas where present-day attributes do not provide the images we want.

On the Processing of Non-Rectangularly Sampled Multi-Dimensional Geophysical Data

1991 ◽  
Vol 02 (01) ◽  
pp. 223-226
Author(s):  
VIRGIL BARDAN
Keyword(s):  
Seismic Data ◽  
Geophysical Data ◽  
Seismic Sections

In this paper the processing of triangularly sampled 2-D seismic data is illustrated by examples of synthetic and field seismic sections.

Potentially Large Subsurface Gas Hydrate Bodies in the Mexican Ridges, Southwestern Gulf of Mexico

2021 ◽  
pp. 1-29
Author(s):  
Papia Nandi ◽  
Patrick Fulton ◽  
James Dale
Keyword(s):  
Gulf Of Mexico ◽  
Gas Hydrate ◽  
Seismic Data ◽  
Poor Quality ◽  
Reflection Point ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
High Impedance ◽  
Acoustic Velocities ◽  
Seismic Images

As rising ocean temperatures can destabilize gas hydrate, identifying and characterizing large shallow hydrate bodies is increasingly important in order to understand their hazard potential. In the southwestern Gulf of Mexico, reanalysis of 3D seismic reflection data reveals evidence for the presence of six potentially large gas hydrate bodies located at shallow depths below the seafloor. We originally interpreted these bodies as salt, as they share common visual characteristics on seismic data with shallow allochthonous salt bodies, including high-impedance boundaries and homogenous interiors with very little acoustic reflectivity. However, when seismic images are constructed using acoustic velocities associated with salt, the resulting images were of poor quality containing excessive moveout in common reflection point (CRP) offset image gathers. Further investigation reveals that using lower-valued acoustic velocities results in higher quality images with little or no moveout. We believe that these lower acoustic values are representative of gas hydrate and not of salt. Directly underneath these bodies lies a zone of poor reflectivity, which is both typical and expected under hydrate. Observations of gas in a nearby well, other indicators of hydrate in the vicinity, and regional geologic context, all support the interpretation that these large bodies are composed of hydrate. The total equivalent volume of gas within these bodies is estimated to potentially be as large as 1.5 gigatons or 10.5 TCF, considering uncertainty for estimates of porosity and saturation, comparable to the entire proven natural gas reserves of Trinidad and Tobago in 2019.

Using Logging and Seismic Data to Identify Boundaries Between Different OWC Units in a Deepwater Carbonate Reservoirs

2021 ◽  
Author(s):  
Kangxu Ren ◽  
Junfeng Zhao ◽  
Jian Zhao ◽  
Xilong Sun
Keyword(s):  
Seismic Data ◽  
Carbonate Rocks ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Sedimentary Process ◽  
Core Samples ◽  
Tight Carbonate ◽  
Porosity And Permeability ◽  
Seismic Sections ◽  
Parameters Inversion

Abstract At least three very different oil-water contacts (OWC) encountered in the deepwater, huge anticline, pre-salt carbonate reservoirs of X oilfield, Santos Basin, Brazil. The boundaries identification between different OWC units was very important to help calculating the reserves in place, which was the core factor for the development campaign. Based on analysis of wells pressure interference testing data, and interpretation of tight intervals in boreholes, predicating the pre-salt distribution of igneous rocks, intrusion baked aureoles, the silicification and the high GR carbonate rocks, the viewpoint of boundaries developed between different OWC sub-units in the lower parts of this complex carbonate reservoirs had been better understood. Core samples, logging curves, including conventional logging and other special types such as NMR, UBI and ECS, as well as the multi-parameters inversion seismic data, were adopted to confirm the tight intervals in boreholes and to predicate the possible divided boundaries between wells. In the X oilfield, hundreds of meters pre-salt carbonate reservoir had been confirmed to be laterally connected, i.e., the connected intervals including almost the whole Barra Velha Formation and/or the main parts of the Itapema Formation. However, in the middle and/or the lower sections of pre-salt target layers, the situation changed because there developed many complicated tight bodies, which were formed by intrusive diabase dykes and/or sills and the tight carbonate rocks. Many pre-salt inner-layers diabases in X oilfield had very low porosity and permeability. The tight carbonate rocks mostly developed either during early sedimentary process or by latter intrusion metamorphism and/or silicification. Tight bodies were firstly identified in drilled wells with the help of core samples and logging curves. Then, the continuous boundary were discerned on inversion seismic sections marked by wells. This paper showed the idea of coupling the different OWC units in a deepwater pre-salt carbonate play with complicated tight bodies. With the marking of wells, spatial distributions of tight layers were successfully discerned and predicated on inversion seismic sections.

Leading-order seismic imaging using curvelets

Geophysics ◽  
2007 ◽  
Vol 72 (6) ◽  
pp. S231-S248 ◽  
Author(s):  
Huub Douma ◽  
Maarten V. de Hoop
Keyword(s):  
Seismic Data ◽  
Order Approximation ◽  
Angular Frequency ◽  
Leading Order ◽  
Numerical Examples ◽  
Depth Migration ◽  
Map Migration ◽  
Kirchhoff Depth Migration ◽  
Homogeneous Media ◽  
Spatial Support

Curvelets are plausible candidates for simultaneous compression of seismic data, their images, and the imaging operator itself. We show that with curvelets, the leading-order approximation (in angular frequency, horizontal wavenumber, and migrated location) to common-offset (CO) Kirchhoff depth migration becomes a simple transformation of coordinates of curvelets in the data, combined with amplitude scaling. This transformation is calculated using map migration, which employs the local slopes from the curvelet decomposition of the data. Because the data can be compressed using curvelets, the transformation needs to be calculated for relatively few curvelets only. Numerical examples for homogeneous media show that using the leading-order approximation only provides a good approximation to CO migration for moderate propagation times. As the traveltime increases and rays diverge beyond the spatial support of a curvelet; however, the leading-order approximation is no longer accurate enough. This shows the need for correction beyond leading order, even for homogeneous media.

scholarly journals Seismic Data Interpretation and Identification of Hydrocarbon-Bearing Zones of Rajian Area, Pakistan

Minerals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 891
Author(s):  
Naveed Ahmad ◽  
Sikandar Khan ◽  
Eisha Fatima Noor ◽  
Zhihui Zou ◽  
Abdullatif Al-Shuhail
Keyword(s):  
Seismic Data ◽  
Foreland Basin ◽  
Data Interpretation ◽  
Indus Basin ◽  
Subsurface Structure ◽  
Vertical Wells ◽  
Salt Range ◽  
Seismic Sections ◽  
The Given ◽  
Triangular Zone

The present study interprets the subsurface structure of the Rajian area using seismic sections and the identification of hydrocarbon-bearing zones using petrophysical analysis. The Rajian area lies within the Upper Indus Basin in the southeast (SE) of the Salt Range Potwar Foreland Basin. The marked horizons are identified using formation tops from two vertical wells. Seismic interpretation of the given 2D seismic data reveals that the study area has undergone severe distortion illustrated by thrusts and back thrusts, forming a triangular zone within the subsurface. The final trend of those structures is northwest–southeast (NW–SE), indicating that the area is part of the compressional regime. The zones interpreted by the study of hydrocarbon potential include Sakessar limestone and Khewra sandstone. Due to the unavailability of a petrophysics log within the desired investigation depths, lithology cross-plots were used for the identification of two potential hydrocarbon-bearing zones in one well at depths of 3740–3835 m (zone 1) and 4015–4100 m (zone 2). The results show that zone 2 is almost devoid of hydrocarbons, while zone 1 has an average hydrocarbon saturation of about 11%.

scholarly journals Unlocking surface octahedral tilt in two-dimensional Ruddlesden-Popper perovskites

2022 ◽  
Vol 13 (1) ◽  
Author(s):  
Yan Shao ◽  
Wei Gao ◽  
Hejin Yan ◽  
Runlai Li ◽  
Ibrahim Abdelwahab ◽  
...  
Keyword(s):  
Density Functional ◽  
Carrier Transport ◽  
Plane Surface ◽  
Structural Phase ◽  
Density Functional Theory Calculations ◽  
Spin Splitting ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Out Of Plane ◽  
Inversion Asymmetry

AbstractMolecularly soft organic-inorganic hybrid perovskites are susceptible to dynamic instabilities of the lattice called octahedral tilt, which directly impacts their carrier transport and exciton-phonon coupling. Although the structural phase transitions associated with octahedral tilt has been extensively studied in 3D hybrid halide perovskites, its impact in hybrid 2D perovskites is not well understood. Here, we used scanning tunneling microscopy (STM) to directly visualize surface octahedral tilt in freshly exfoliated 2D Ruddlesden-Popper perovskites (RPPs) across the homologous series, whereby the steric hindrance imposed by long organic cations is unlocked by exfoliation. The experimentally determined octahedral tilts from n = 1 to n = 4 RPPs from STM images are found to agree very well with out-of-plane surface octahedral tilts predicted by density functional theory calculations. The surface-enhanced octahedral tilt is correlated to excitonic redshift observed in photoluminescence (PL), and it enhances inversion asymmetry normal to the direction of quantum well and promotes Rashba spin splitting for n > 1.

Sign in / Sign up

Export Citation Format

Share Document