TELLURIC SOUNDING—A MAGNETOTELLURIC METHOD WITHOUT MAGNETIC MEASUREMENTS

Geophysics ◽  
1966 ◽  
Vol 31 (1) ◽  
pp. 185-191 ◽  
Author(s):  
S. H. Yungul
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
Magnetic Measurements ◽  
Sedimentary Basins ◽  
Base Station ◽  
Primary Objective ◽  
Field Station ◽  
Field Operation ◽  
Resistivity Log ◽  
The Magnetic Field

The basic theory and objectives of telluric sounding (TS) are about the same as those of the well‐known method of magnetotelluric sounding (MTS) (Cagniard, 1953). Both methods make use of the natural electromagnetic phenomena known as geomagnetic micropulsations to obtain crude “resistivity logs” from the surface down to great depths, without drilling, if the subsurface has mild structures, low dips, and lateral continuity in the electrical resistivity. Let the x-y plane of the Cartesian coordinates represent the surface of the earth. With MTS, the field operation consists of simultaneously recording the time variations of an arbitrary x component of the electric field, [Formula: see text], called a tellurogram, and that of the y component of the magnetic field, [Formula: see text], called a magnetogram, both at the same point where the downward information is desired. The main difficulty is in the measurement of the magnetic field variations with sufficient accuracy. The measurement of the electric field variations is very simple and expeditious. TS bypasses this difficulty, because it does not require the measurement of the magnetic field. With TS, the field operation requires two electric field recording units. One of these units remains at a “base station” where the subsurface is known from a well log, while the second unit is placed at a “field station” where one wishes to explore the subsurface. Thus, for each sounding, one obtains two simultaneous tellurograms. These are Fourier analyzed. The ratios of the electric field amplitudes as a function of frequency, combined with the resistivity log at the base station, furnish the MTS‐type data at the field station that are interpreted in the usual manner to yield a crude resistivity log at the field station. The primary objective of TS is the exploration of sedimentary basins. It may be preferable to MTS in certain cases and vice versa; it is not meant to replace MTS. The theoretical basis and the procedures of TS are discussed in this paper.

CALCULATING THE PARAMETERS USED IN TELLURIC CURRENT PROSPECTING

Geophysics ◽  
1963 ◽  
Vol 28 (3) ◽  
pp. 482-485 ◽  
Author(s):  
Li Y‐Shu
Keyword(s):  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Electrical Conductance ◽  
Sedimentary Basins ◽  
Base Station ◽  
Current Data ◽  
Field Station ◽  
Fixed Base ◽  
Station Location

In telluric current prospecting, the amplitudes of variations of the telluric‐electric field are measured simultaneously at a fixed base station and a roving field station. In sedimentary basins, variations in electrical conductance through the sedimentary column may be studied by comparing the amplitude of electric field variations at the roving station with the amplitude of the same electric field variations at the base station. The parameter ordinarily used in interpreting telluric current data is μ, the ratio of electric field intensity at a roving station location to the electric field intensity at the base station. Under favorable conditions, the ratio μ is directly proportional to the total longitudinal conductance of the rock layers above insulating basement rock.

PEMANFAATAN RADIASI ENERGI TEGANGAN 150 KV UNTUK LAMPU LED PENERANGAN JALAN

Jurnal Teknik ◽  
2018 ◽  
Vol 7 (1) ◽  
Author(s):  
Mauludi Manfaluthy
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
High Voltage ◽  
Low Frequency ◽  
Energy Utilization ◽  
World Health ◽  
Electromagnetic Signals ◽  
Health Organization ◽  
The Magnetic Field ◽  
Low Frequency Waves

WHO (World Health Organization) concludes that not much effect is caused by electric field up to 20 kV / m in humans. WHO standard also mentions that humans will not be affected by the magnetic field under  100 micro tesla and that the electric field will affect the human body with a maximum standard of 5,000 volts per meter. In this study did not discuss about the effect of high voltage radiation SUTT (High Voltage Air Channel) with human health. The research will focus on energy utilization of SUTT radiation. The combination of electric field and magnetic field on SUTT (70-150KV) can generate electromagnetic (EM) and radiation waves, which are expected to be converted to turn on street lights around the location of high voltage areas or into other forms. The design of this prototype works like an antenna in general that captures electromagnetic signals and converts them into AC waves. With a capacitor that can store the potential energy of AC and Schottky diode waves created specifically for low frequency waves, make the current into one direction (DC). From the research results obtained the current generated from the radiation is very small even though the voltage is big enough.Keywords : Radiance Energy, Joule Thief, and  LED Module.

Investigating flexible textile-based coils for wireless charging wearable electronics

2019 ◽  
Vol 50 (3) ◽  
pp. 333-345 ◽  
Author(s):  
Danmei Sun ◽  
Meixuan Chen ◽  
Symon Podilchak ◽  
Apostolos Georgiadis ◽  
Qassim S Abdullahi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electrical Conductivity ◽  
Electromagnetic Field ◽  
Electric Field ◽  
Dimensional Stability ◽  
Screen Printing ◽  
Wearable Electronics ◽  
Wireless Charging ◽  
The Magnetic Field ◽  
Screen Printed

Smart and interactive textiles have been attracted great attention in recent years. This research explored three different techniques and processes in developing textile-based conductive coils that are able to embed in a garment layer. Coils made through embroidery and screen printing have good dimensional stability, although the resistance of screen printed coil is too high due to the low conductivity of the print ink. Laser cut coil provided the best electrical conductivity; however, the disadvantage of this method is that it is very difficult to keep the completed coil to the predetermined shape and dimension. The tested results show that an electromagnetic field has been generated between the textile-based conductive coil and an external coil that is directly powered by electricity. The magnetic field and electric field worked simultaneously to complete the wireless charging process.

Gas-ionizing shocks in a magnetic field

1967 ◽  
Vol 1 (1) ◽  
pp. 37-54 ◽  
Author(s):  
M. D. Cowley
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
Wave Speed ◽  
Normal Velocity ◽  
Electrically Conducting ◽  
Shock Stability ◽  
The Face ◽  
Arbitrary Velocity ◽  
Flow Plane ◽  
The Magnetic Field

Ionizing shocks for plane flows with the magnetic field lying in the flow plane are considered. The gas is assumed to be electrically conducting downstream, but non-conducting upstream. Shocks whose downstream state has a normal velocity component less than the slow magneto-acoustic-wave speed and whose upstream state is supersonic are found to be non-evolutionary in the face of plane magneto-acoustic disturbances, unless the upstream electric field in a frame of reference where the gas is at rest is arbitrary. Velocity conditions are also determined for shock stability with the electric field not arbitrary.Shock structures are found for the case of large ohmic diffusion, the initial temperature rise and ionization of the gas being caused by a thin transition having the properties of an ordinary gasdynamic shock. For the case where shocks are evolutionary when the upstream electric field is arbitrary, the shock structure requirements only restrict the electric field by limiting the range of possible values. When shocks are evolutionary with the electric field not arbitrary, they can only have a structure for a particular value of the electric field. Limits to the current carried by ionizing shocks and the effects of precursor ionization are discussed qualitatively.

scholarly journals Mapping of steady-state electric fields and convective drifts in geomagnetic fields – Part 1: Elementary models

2016 ◽  
Vol 34 (1) ◽  
pp. 55-65 ◽  
Author(s):  
A. D. M. Walker ◽  
G. J. Sofko
Keyword(s):  
Magnetic Field ◽  
Steady State ◽  
Electric Field ◽  
Electric Fields ◽  
Magnetic Field Line ◽  
Geomagnetic Field ◽  
Geomagnetic Field Models ◽  
Spatial Derivatives ◽  
Field Lines ◽  
The Magnetic Field

Abstract. When studying magnetospheric convection, it is often necessary to map the steady-state electric field, measured at some point on a magnetic field line, to a magnetically conjugate point in the other hemisphere, or the equatorial plane, or at the position of a satellite. Such mapping is relatively easy in a dipole field although the appropriate formulae are not easily accessible. They are derived and reviewed here with some examples. It is not possible to derive such formulae in more realistic geomagnetic field models. A new method is described in this paper for accurate mapping of electric fields along field lines, which can be used for any field model in which the magnetic field and its spatial derivatives can be computed. From the spatial derivatives of the magnetic field three first order differential equations are derived for the components of the normalized element of separation of two closely spaced field lines. These can be integrated along with the magnetic field tracing equations and Faraday's law used to obtain the electric field as a function of distance measured along the magnetic field line. The method is tested in a simple model consisting of a dipole field plus a magnetotail model. The method is shown to be accurate, convenient, and suitable for use with more realistic geomagnetic field models.

scholarly journals Spacecraft and interplanetary contributions to the magnetic environment on-board LISA Pathfinder

2020 ◽  
Vol 494 (2) ◽  
pp. 3014-3027
Author(s):  
M Armano ◽  
H Audley ◽  
J Baird ◽  
P Binetruy ◽  
M Born ◽  
...  
Keyword(s):  
Magnetic Field ◽  
New Technologies ◽  
Magnetic Measurements ◽  
Magnetic Measurement ◽  
Low Frequency ◽  
Lisa Pathfinder ◽  
Frequency Regime ◽  
The Magnetic Field ◽  
Instrument Sensitivity ◽  
Stationary Component

ABSTRACT LISA Pathfinder (LPF) has been a space-based mission designed to test new technologies that will be required for a gravitational wave observatory in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime (mHz and below), the measurement band of interest for a space-based observatory. The magnetic field can couple to the magnetic susceptibility and remanent magnetic moment from the test masses and disturb them from their geodesic movement. LPF carried on-board a dedicated magnetic measurement subsystem with noise levels of 10 $\rm nT \ Hz^{-1/2}$ from 1 Hz down to 1 mHz. In this paper we report on the magnetic measurements throughout LPF operations. We characterize the magnetic environment within the spacecraft, study the time evolution of the magnetic field and its stability down to 20 μHz, where we measure values around 200 $\rm nT \ Hz^{-1/2}$, and identify two different frequency regimes, one related to the interplanetary magnetic field and the other to the magnetic field originating inside the spacecraft. Finally, we characterize the non-stationary component of the fluctuations of the magnetic field below the mHz and relate them to the dynamics of the solar wind.

scholarly journals Non-magnetic generating electricity

2021 ◽  
Author(s):  
Shuai Yang
Keyword(s):  
Magnetic Field ◽  
Magnetic Flux ◽  
Electric Field ◽  
Induced Current ◽  
Current Generation ◽  
Scientific Cognition ◽  
The Past ◽  
Directional Movement ◽  
Voltage Generation ◽  
The Magnetic Field

Abstract In the past scientific cognition, changes in the magnetic field produce electric field, so when there is current and voltage generation, need to have a change in magnetic flux, However, in the process of studying the nature of magnetization, we found that the microscopic formation of a magnetic field is the directional movement of positive and negative charges, under the guidance of this theory, we use other methods, realize the separation of positive and negative charges, observation of induced current generation, this can be used as another way to generate electricity.

scholarly journals Practice and perspectives of using ultrasensitive magnetometers in biomedical research.

2021 ◽  
Author(s):  
Yu.V. Maslennikov ◽  
◽  
◽  
Keyword(s):  
Magnetic Field ◽  
Biomedical Research ◽  
Magnetic Measurements ◽  
Signal To Noise Ratio ◽  
Frequency Range ◽  
Optically Pumped ◽  
Technical Solutions ◽  
Further Development ◽  
The Magnetic Field

There are a large number of sensors for measuring the magnetic field of biological objects. They are characterized by the type of the measured physical parameter (magnetic field strength, magnetic flux, etc.), the level of intrinsic sensitivity, and the frequency range of the recorded signals. The long-term practice of studying biomagnetic signals shows that only SQUID-based magnetometers and optically pumped magnetometers have sensitivity levels sufficient for recording biomagnetic signals with the required signal-to-noise ratio. This chapter reflects the main directions of using such magnetometers and methods of magnetic measurements in biomedical research, gives examples of existing technical solutions, and shows possible ways of their further development.

scholarly journals Precision Analysis and Design of Rotating Coil Magnetic Measurements System

2020 ◽  
Vol 10 (23) ◽  
pp. 8454
Author(s):  
Soontorn Odngam ◽  
Chaiyut Preecha ◽  
Prapaiwan Sanwong ◽  
Woramet Thongtan ◽  
Jiraphon Srisertpol
Keyword(s):  
Magnetic Field ◽  
Control System ◽  
Magnetic Measurements ◽  
Speed Control ◽  
Measuring Instruments ◽  
Dipole Magnet ◽  
Analysis And Design ◽  
Speed Control System ◽  
The Impact ◽  
The Magnetic Field

This research presents the design and construction of measuring instruments for a dipole magnetic field using a rotating coil technique. This technique is a closed-loop speed-control system where a Proportional-Integral (PI) controller works together with the intensity measurement of the magnetic field through the rotating coil. It was used to analyze the impact on the accuracy of the electromagnetic at speed ranges of 60, 90, and 120 rpm. The error estimation in the measurement of the normal dipole and skew dipole magnet caused by the steady-state error of the speed control system and the rotational search coil in whirling motion are demonstrated. Rotating unbalance, shaft coupling, and misalignment from its setup disturbed the performance of the speed control system as a nonlinear system.

Fast magnetic field penetration into low resistivity plasma

2017 ◽  
Vol 83 (1) ◽  
Author(s):  
Amnon Fruchtman
Keyword(s):  
Magnetic Field ◽  
Energy Dissipation ◽  
Electric Field ◽  
Density Gradient ◽  
Magnetic Energy ◽  
Measured Velocity ◽  
Magnetic Field Penetration ◽  
The Magnetic Field ◽  
Uniform Plasma ◽  
Field Penetration

Penetration of a magnetic field into plasma that is faster than resistive diffusion can be induced by the Hall electric field in a non-uniform plasma. This mechanism explained successfully the measured velocity of the magnetic field penetration into pulsed plasmas. Major related issues have not yet been resolved. Such is the theoretically predicted, but so far not verified experimentally, high magnetic energy dissipation, as well as the correlation between the directions of the density gradient and of the field penetration.

Sign in / Sign up

Export Citation Format

Share Document