scholarly journals Nepheline solid solution compositions: stoichiometry revisited, reviewed, clarified and rationalised

2020 ◽  
pp. 1-26 ◽  
Author(s):  
C. Michael B. Henderson
Keyword(s):  
Solid Solution ◽  
Unit Cell ◽  
Alkaline Complex ◽  
High Quality ◽  
Diagnostic Parameters ◽  
Rock Types ◽  
Charge Parameter ◽  
Cation Charge ◽  
Excel File

Abstract Molecular formulae used to recalculate nepheline analyses generally have different numbers of oxygens (e.g. NaAlSiO4 (Ne), KAlSiO4, (Ks), CaAl2Si2O8 (An) and SiO2 (Q)). A 32 oxygen cell has 16 T cations and 8 cavity sites, but ideal nepheline stoichiometry is not necessarily followed. Ca end-member □CaCaAl2Si2O4 (CaNe) and excess silica end-member □SiSi2O4 (Q’) calculation requires inclusion of both vacancy species as cavity cation values. Q’ parameter calculations can involve different assumptions and four parameters are described: Qxs; QSi; Q(Si–Al); and Qcavity; these should have closely similar values for high-quality, stoichiometric analyses. Representative published compositions are recalculated to assess whether authors followed ideal nepheline stoichiometry. Phenocrysts from peralkaline rocks and nephelinites typically exhibit Al deficiencies reflected in negative Δ(Al – cavity cation) parameters (ΔAlcc), negative ‘normative’ corundum (Al2O3, Cn), and anomalously low or negative Qxs parameters; for such rock types Q(Si–Al) provides a better estimate of excess silica contents. A ΔT-site (cation charge) parameter (ΔTcharge), is closely coupled to ΔAlcc and end-member NaAlSiO4 has a ΔAlcc/ΔTcharge ratio of 1.4296; the derivation of this value is controlled by strict stuffed-tridymite, unit-cell constraints. Natural nephelines all contain excess silica with a mean ΔAlcc/ΔTcharge of ~1.134 reflecting their Si/Al ratio being > 1. Nepheline analyses with relatively low Al and Si and high Na (also Ca) contents are common; this might reflect the presence of small amounts (up to ~5%) of cancrinite as an alteration phase or perhaps even in solid solution. The compositions of alteration lamellae of Ca-rich cancrinite in altered nepheline phenocrysts in phonolites from the Marangudzi alkaline complex, Zimbabwe, are used to define diagnostic parameters for recognising such non-stoichiometry. These alteration lamellae formed hydrothermally from Ca-rich and K-poor fluids. An EXCEL file is provided to help researchers to standardise calculation of nepheline end-member molecular proportions.

scholarly journals Rinkite–nacareniobsite-(Ce) solid solution series and hainite from the Ilímaussaq alkaline complex: occurrence and compositional variation

2014 ◽  
Vol 62 ◽  
pp. 1-15
Author(s):  
Jørn G. Rønsbo ◽  
Henning Sørensen ◽  
Encarnacion Roda-Robles ◽  
François Fontan ◽  
Pierre Monchoux
Keyword(s):  
Solid Solution ◽  
Electron Microprobe ◽  
Compositional Variation ◽  
Solid Solution Series ◽  
Alkaline Complex ◽  
Full Extension ◽  
X Ray ◽  
Solution Series ◽  
Compositional Variations ◽  
A Minor

In the Ilímaussaq alkaline complex, minerals from the rinkite–nacareniobsite-(Ce) solid solution series have been found in pulaskite pegmatite, sodalite foyaite, naujaite and naujaite pegmatite from the roof sequence, and in marginal pegmatite, kakortokite and lujavrite from the floor sequence. The electron microprobe analyses embrace almost the full extension of the solid solution series and confirm its continuity. The solid solution series shows similar compositional variations in the roof and floor sequences: Rinkite members of the series are found in the less evolved rocks in the two sequences, whereas nacareniobsite-Ce members occur in the most evolved rocks and pegmatites in the two sequences. The REE (+Y) content varies from 0.83 atoms per formula unit (apfu) in rinkite from pulaskite pegmatite to 1.31 apfu in nacareniobsite-(Ce) from naujaite pegmatite. The main substitution mechanisms in the solid solution series investigated in this work are 2Ca2+ = Na+ + REE3+ and Ti4+ + Ca2+ = Nb5+ + Na+. The increased contents of Nb5+ and REE3+ are only to a minor degree compensated through the F1– = O2– substitution. The chondrite normalised REE patterns of the minerals develop in a similar way in the two sequences, showing relative La-enrichment and Y-depletion from the less to the most evolved rocks. Hainite has not previously been found in the Ilímaussaq complex. It was here identified in a pulaskite pegmatite sample by a combination of X-ray diffraction giving the unit cell dimensions a = 9.5923(7) Å, b = 7.3505(5) Å, c = 5.7023(4) Å, α = 89.958(2)°, β = 100.260(1)°, γ = 101.100(2)°, and X-ray powder pattern and electron microprobe data giving the empirical formula (Ca1.62 Zr0.16Y 0.22) (Na0.87Ca1.11) (Ca 1.65 REE0.35)Na(Ti0.81Nb0.09Fe0.08 Zr0.02)(Si2O7)2O0.99F2.96. Based on published and the present data it is documented that minerals from the hainite-götzenite solid solution series show a compositional variation between the ideal end members (Y,REE,Zr)Na2Ca4Ti(Si2O7)2OF3 and NaCa6Ti(Si2O7)2OF3.

The solid solution TbNiIn1−x Ga x

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Myroslava Horiacha ◽  
Galyna Nychyporuk ◽  
Rainer Pöttgen ◽  
Vasyl Zaremba
Keyword(s):  
Solid Solution ◽  
Unit Cell ◽  
Type Structure ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Structure Space ◽  
Arc Melting

Abstract Phase formation in the solid solution TbNiIn1−x Ga x at 873 K was investigated in the full concentration range by means of powder X-ray diffraction and EDX analysis. The samples were synthesized by arc-melting of the pure metals with subsequent annealing at 873 K for one month. The influence of the substitution of indium by gallium on the type of structure and solubility was studied. The solubility ranges have been determined and changes of the unit cell parameters were calculated on the basis of powder X-ray diffraction data: TbNiIn1–0.4Ga0–0.6 (ZrNiAl-type structure, space group P 6 ‾ 2 m $P‾{6}2m$ , a = 0.74461(8)–0.72711(17) and c = 0.37976(5)–0.37469(8) nm); TbNiIn0.2–0Ga0.8–1.0 (TiNiSi-type structure, space group Pnma, а = 0.68950(11)–0.68830(12), b = 0.43053(9)–0.42974(6), с = 0.74186(10)–0.73486(13) nm). The crystal structures of TbNiGa (TiNiSi type, Pnma, a = 0.69140(5), b = 0.43047(7), c = 0.73553(8) nm, wR2=0.0414, 525 F 2 values, 21 variables), TbNiIn0.83(1)Ga0.17(1) (ZrNiAl type, P 6 ‾ 2 m $P‾{6}2m$ , a = 0.74043(6), c = 0.37789(3) nm, wR2 = 0.0293, 322 F 2 values, 16 variables) and TbNiIn0.12(2)Ga0.88(2) (TiNiSi type, Pnma, a = 0.69124(6), b = 0.43134(9), c = 0.74232(11) nm, wR2 = 0.0495, 516 F 2 values, 21 variables) have been determined. The characteristics of the solid solutions and the variations of the unit cell parameters are briefly discussed.

Crystal chemistry of lamprophyllite-group minerals from the Murun alkaline complex (Russia) and pegmatites of Rocky Boy and Gordon Butte (USA): single crystal X-ray diffraction and Raman spectroscopy study

2021 ◽  
Vol 77 (2) ◽  
Author(s):  
Sergey M. Aksenov ◽  
Anastasia D. Ryanskaya ◽  
Yuliya V. Shchapova ◽  
Nikita V. Chukanov ◽  
Nikolay V. Vladykin ◽  
...  
Keyword(s):  
Solid Solution ◽  
Single Crystal ◽  
Raman Spectra ◽  
Crystal Chemistry ◽  
Solid Solution Series ◽  
X Ray Diffraction ◽  
Alkaline Complex ◽  
Oh Groups ◽  
X Ray ◽  
Solution Series

Specific features of the crystal chemistry of lamprophyllite-group minerals (LGMs) are discussed using the available literature data and the results of the single-crystal X-ray diffraction and a Raman spectroscopic studies of several samples taken from the Murun alkaline complex (Russia), and Rocky Boy and Gordon Butte pegmatites (USA) presented here. The studied samples are unique in their chemical features and the distribution of cations over structural sites. In particular, the sample from the Gordon Butte pegmatite is a member of the barytolamprophyllite–emmerichite solid solution series, whereas the samples from the Murun alkaline complex and from the Rocky Boy pegmatite are intermediate members of the solid solution series formed by lamprophyllite and a hypothetical Sr analogue of emmerichite. The predominance of O2− over OH− and F− at the X site is a specific feature of sample Cha-192 from the Murun alkaline complex. New data on the Raman spectra of LGMs obtained in this work show that the wavenumbers of the O—H stretching vibrations depend on the occupancies of the M2 and M3 sites coordinating with (OH)− groups. Cations other than Na+ and Ti4+ (mainly, Mg and Fe3+) can play a significant role in the coordination of the X site occupied by (OH)−. Data on polarized Raman spectra of an oriented sample indicate that the OH groups having different local coordinations have similar orientations with respect to the crystal. The calculated measures of similarity (Δ) for lamprophyllite and ericssonite are identical (0.157 and 0.077 for the 2M- and 2O-polytypes, respectively), which indicates that these minerals are crystal-chemically isotypic and probably should be considered within the same mineral group by analogy to the other mineralogical groups which combine isotypic minerals.

Reduced Unit Cell Determination From Unindexed EBSD Patterns

2000 ◽  
Vol 6 (S2) ◽  
pp. 946-947 ◽  
Author(s):  
J. R. Michael ◽  
R. P. Goehner
Keyword(s):  
Electron Microscope ◽  
Electron Backscatter Diffraction ◽  
Unit Cell ◽  
Phase Identification ◽  
High Quality ◽  
Charge Coupled Device ◽  
Transmission Electron ◽  
Single Pattern ◽  
Backscatter Diffraction

Electron backscatter diffraction (EBSD) is a technique that can provide identification of unknown crystalline phases while exploiting the excellent imaging capabilities of the scanning electron microscope (SEM). Phase identification using EBSD has now progressed to the point that it is commercially available. Phase identification in the SEM requires high quality EBSD patterns that can only be collected using either film or charge coupled device (CCD)-based cameras. High quality EBSD patterns obtained in this manner show many diffraction features that are useful in the determination of the unit cell of the sample.’ This paper will discuss the features in the EBSD patterns and the procedure used to determine the reduced unit cell of the sample.One of the major advantages of EBSD over electron diffraction in the transmission electron microscope is the remarkable field of view that is routinely attained. The large angular view of the diffraction pattern permits many zone axes and their associated symmetries to be viewed in a single pattern or at most a few patterns.

High quality LED lamps using color-tunable Ce3+-activated yellow-green oxyfluoride solid-solution and Eu3+-doped red borate phosphors

2015 ◽  
Vol 3 (31) ◽  
pp. 8132-8141 ◽  
Author(s):  
W. B. Dai ◽  
S. Ye ◽  
E. L. Li ◽  
P. Z. Zhuo ◽  
Q. Y. Zhang
Keyword(s):  
Solid Solution ◽  
White Light ◽  
High Quality ◽  
Warm White Light ◽  
Color Tunable

Warm white light has been demonstrated using color-tunable Ce3+-activated yellow-green oxyfluoride solid-solution and Eu3+-doped red borate phosphors.

High Quality Powder Diffraction Data from an Impure Specimen: Triphylite, Li(Fe,Mn)PO4

1989 ◽  
Vol 4 (1) ◽  
pp. 26-28 ◽  
Author(s):  
Frank N. Blanchard ◽  
Pablo P. Saligan
Keyword(s):  
Single Crystal ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Unit Cell ◽  
Powder Diffraction Data ◽  
High Quality

AbstractHigh quality powder diffraction data were obtained from a specimen containing inseparable impurities, by using single crystal precession photographs to explore all possible reflections for the mineral being studied. In this manner it is acceptable to ignore weak reflections that do not index on the unit cell and that are not observed on the single crystal photographs. Triphylite is given as an example.

Undisturbed pit sampling of tropical red clay soils

1991 ◽  
Vol 7 (1) ◽  
pp. 485-490
Author(s):  
M. G. Culshaw ◽  
K. J. Northmore ◽  
P. R. N. Hobbs
Keyword(s):  
Technical Note ◽  
Clay Soils ◽  
Triaxial Testing ◽  
Red Clay ◽  
High Quality ◽  
Simple Method ◽  
Open Structure ◽  
Rock Types ◽  
Undisturbed Samples ◽  
Volcanic Deposits

AbstractThe tropical red clay soils, formed by the Quaternary weathering of volcanic deposits (and other rock types) in tropical and subtropical environments, have a very open structure and consequent high voids ratio. These soils are particularly sensitive to disturbance during sampling and subsequent transportation and extrusion of the samples. This technical note describes a simple method for obtaining high quality, undisturbed samples from pits in a way that does not require extrusion or trimming of the sample in the laboratory prior to triaxial testing, and only minimal preparation prior to oedometer testing.

Neutron Powder Diffraction Investigation of Pd2.7Ni0.3P0.94

2004 ◽  
Vol 443-444 ◽  
pp. 353-356
Author(s):  
M. Vennström ◽  
Y. Andersson
Keyword(s):  
Crystal Structure ◽  
Solid Solution ◽  
Powder Diffraction ◽  
Rietveld Method ◽  
Neutron Powder Diffraction ◽  
Unit Cell ◽  
Type Structure ◽  
Unit Cell Parameters ◽  
Cell Parameters ◽  
Method Show

Pd3P, which crystallises in the cementite, Fe3C-type structure, forms a solid solution with nickel. The crystal structure contains two crystallographically different palladium sites (8d and 4c). Refinements of neutron powder diffraction intensities using the Rietveld method show that all nickel atoms occupy the eight-fold position. The unit cell parameters were refined to a=5.7812(4) Å, b=7.4756(6) Å and c=5.1376(4) Å, for Pd2.7Ni0.3P0.94.

The crystal structure of ammoniojarosite, (NH4)Fe3(SO4)W(OH)6 and the crystal chemistry of the ammoniojarosite–hydronium jarosite solid-solution series

2007 ◽  
Vol 71 (4) ◽  
pp. 427-441 ◽  
Author(s):  
L. C. Basciano ◽  
R. C. Peterson
Keyword(s):  
Solid Solution ◽  
Short Wave ◽  
Unit Cell ◽  
Solid Solution Series ◽  
Hydrogen Atoms ◽  
Solution Series ◽  
Hydronium Jarosite ◽  
Cell Dimensions ◽  
Unit Cell Dimensions ◽  
End Members

AbstractThe atomic structure of ammoniojarosite,[(NH4)Fe3(SO4)2(OH)6], a = 7.3177(3) Å, c = 17.534(1) Å, space group Rm, Z = 3, has been solved using single-crystal X-ray diffraction (XRD) to wR 3.64% and R 1.4%. The atomic coordinates of the hydrogen atoms of the NH4 group were located and it was found that the ammonium group has two different orientations with equal probability. Hydronium commonly substitutes into jarosite group mineral structures and samples in the ammoniojarosite–hydronium jarosite solid-solution series were synthesized and analysed using powder XRD and Rietveld refinement. Changes in unit-cell dimensions and bond lengths are noted across the solidsolution series. The end-member ammoniojarosite synthesized in this study has no hydronium substitution in the A site and the unit-cell dimensions determined have a smaller a dimension and larger c dimension than previous studies. Two natural ammoniojarosite samples were analysed and shown to have similar unit-cell dimensions to the synthetic samples. Short-wave infrared and Fourier transform infrared spectra were collected for samples from the NH4–H3O jarosite solid-solution series and the differences between the end-members were significant. Both are useful tools for determining NH4 content in jarosite group minerals.

Sign in / Sign up

Export Citation Format

Share Document