Smectitic clays enriched with ferric ions for the rapid removal of anionic dyes in aqueous media

Clay Minerals ◽  
2020 ◽  
Vol 55 (1) ◽  
pp. 12-23 ◽  
Author(s):  
Itamar A. Rodrigues ◽  
Juan C. Villalba ◽  
Maria J. Santos ◽  
Fábio L. Melquiades ◽  
Fauze J. Anaissi
Keyword(s):  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Ferric Ions ◽  
Anionic Dyes ◽  
Brilliant Blue Fcf ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Rapid Removal ◽  
Time Required

AbstractSodium smectite clays were enriched with ferric ions (Argel-Fe and Volclay-Fe) to convert the surface charge of the clays from negative to positive and to use the clays in the discolouration of a synthetic effluent composed of seven anionic dyes (mixed from tartrazine, Brilliant Blue FCF and amaranth). The iron content increased from 5.99% to 11.02% for Argel-Fe and from 5.39% to 10.54% for Volclay-Fe. The efficiency of the discolouration of the anion dye mixture was evaluated by measuring the absorbance of the mixture at 562 nm, where the band with the greatest intensity was found. The contact time required for the system to reach equilibrium was ~5 min for both adsorbents. The kinetic adsorption data supported a pseudo-second-order kinetic model. The experimental data support the dual-site Langmuir–Freundlich isotherm model. The maximum adsorption capacities were 88.68 mg g–1 for Argel-Fe and 392.21 mg g–1 for Volclay-Fe. The enrichment of clays with Fe(III) added functionality to the clays and generated adsorbents with rapid adsorption abilities and high discolouration capacities.

scholarly journals Removal of Pb(II) by Pellicle-Like Biofilm-Producing Methylobacterium hispanicum EM2 Strain from Aqueous Media

Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2081 ◽  
Author(s):  
Sun-Wook Jeong ◽  
Hyo Kim ◽  
Jung Yang ◽  
Yong Choi
Keyword(s):  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Infrared Analysis ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Drinking Water Contamination ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

As concerns are increasing about drinking water contamination with heavy metals, we investigated the possible use of a pellicle (floating biofilm)-like biofilm-producing microorganism as a biosorbent for the treatment of Pb(II) in aqueous solutions. The bacterial pellicle-producing Methylobacterium hispanicum EM2 strain (EM2) was newly isolated from mine tailing soil, and we investigated its use as a biosorbent for treating a Pb(II)-contaminated aqueous solution. The EM2 strain was strongly resistant to Pb(II) up to a concentration of 800 mg/L, and achieved remarkable adsorption performance (adsorption rate and maximum adsorption capacity of 96% ± 3.2% and 79.84 mg/g, respectively) under optimal conditions (pH, biomass content, contact time, and initial Pb(II) concentration of 7.1 g/L, 60 min, and 10 mg/L, respectively). The adsorption of Pb(II) was characterized by scanning electron microscopy-energy dispersive x-ray spectroscopy and Fourier-transform infrared analysis. The equilibrium data matched the Freundlich isotherm model well, indicating the occurrence of multilayer adsorption of Pb(II) onto the heterogeneous surface of the EM2 strain, which was also consistent with the pseudo-second-order kinetic model (R2 = 0.98). The high Pb(II) removal efficiency was also confirmed by conducting an adsorption experiment using Pb(II)-contaminated industrial wastewater.

scholarly journals Sawdust for the Removal of Heavy Metals from Water: A Review

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4318
Author(s):  
Elie Meez ◽  
Abbas Rahdar ◽  
George Z. Kyzas
Keyword(s):  
Heavy Metals ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Suitable Material ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
And Control ◽  
Environmental Agencies

The threat of the accumulation of heavy metals in wastewater is increasing, due to their abilities to inflict damage to human health, especially in the past decade. The world’s environmental agencies are trying to issue several regulations that allow the management and control of random disposals of heavy metals. Scientific studies have heavily focused on finding suitable materials and techniques for the purification of wastewaters, but most solutions have been rejected due to cost-related issues. Several potential materials for this objective have been found and have been compared to determine the most suitable material for the purification process. Sawdust, among all the materials investigated, shows high potential and very promising results. Sawdust has been shown to have a good structure suitable for water purification processes. Parameters affecting the adsorption mechanism of heavy metals into sawdust have been studied and it has been shown that pH, contact time and several other parameters could play a major role in improving the adsorption process. The adsorption was found to follow the Langmuir or Freundlich isotherm and a pseudo second-order kinetic model, meaning that the type of adsorption was a chemisorption. Sawdust has major advantages to be considered and is one of the most promising materials to solve the wastewater problem.

scholarly journals Simultaneous removal of cationic and anionic dyes from aqueous solution by double functional groups modified bagasse

2020 ◽  
Vol 82 (10) ◽  
pp. 2159-2167
Author(s):  
Ru-yi Zhou ◽  
Jun-xia Yu ◽  
Ru-an Chi
Keyword(s):  
Aqueous Solution ◽  
Functional Groups ◽  
Order Kinetic ◽  
Anionic Dyes ◽  
Adsorption Capacities ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Amine Groups ◽  
Modified Adsorbents ◽  
Zeta Potential Analysis

Abstract Double functional groups modified bagasse (DFMBs), a series of new zwitterionic groups of carboxyl and amine modified adsorbents, were prepared through grafting tetraethylenepentamine (TEPA) onto the pyromellitic dianhydride (PMDA) modified bagasse using the DCC/DMAP method. DFMBs' ability to simultaneously remove basic magenta (BM, cationic dye) and Congo red (CR, anionic dye) from aqueous solution in single and binary dye systems was investigated. FTIR spectra and Zeta potential analysis results showed that PMDA and TEPA were successfully grafted onto the surface of bagasse, and the ratio of the amount of carboxyl groups and amine groups was controlled by the addition of a dosage of TEPA. Adsorption results showed that adsorption capacities of DFMBs for BM decreased while that for CR increased with the increase of the amount of TEPA in both single and binary dye systems, and BM or CR was absorbed on the modified biosorbents was mainly through electrostatic attraction and hydrogen bond. The adsorption for BM and CR could reach equilibrium within 300 min, both processes were fitted well by the pseudo-second-order kinetic model. The cationic and anionic dyes removal experiment in the binary system showed that DMFBs could be chosen as adsorbents to treat wastewater containing different ratios of cationic and anionic dyes.

scholarly journals The Removal of Uranium and Thorium from Their Aqueous Solutions by 8-Hydroxyquinoline Immobilized Bentonite

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 626 ◽  
Author(s):  
Salah ◽  
Gaber ◽  
Kandil
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of uranium and thorium from their aqueous solutions by using 8-hydroxyquinoline modified Na-bentonite (HQ-bentonite) was investigated by the batch technique. Na-bentonite and HQ-bentonite were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) spectroscopy. Factors that influence the sorption of uranium and thorium onto HQ-bentonite such as solution pH, contact time, initial metal ions concentration, HQ-bentonite mass, and temperature were tested. Sorption experiments were expressed by Freundlich and Langmuir isotherms and the sorption results demonstrated that the sorption of uranium and thorium onto HQ-bentonite correlated better with the Langmuir isotherm than the Freundlich isotherm. Kinetics studies showed that the sorption followed the pseudo-second-order kinetic model. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the sorption of uranium and thorium onto HQ-bentonite was endothermic, feasible, spontaneous, and physical in nature. The maximum adsorption capacities of HQ-bentonite were calculated from the Langmuir isotherm at 303 K and were found to be 63.90 and 65.44 for U(VI) and Th(IV) metal ions, respectively.

scholarly journals The Presence of Cu Facilitates Adsorption of Tetracycline (TC) onto Water Hyacinth Roots

2018 ◽  
Vol 15 (9) ◽  
pp. 1982 ◽  
Author(s):  
Xin Lu ◽  
Beibei Tang ◽  
Qi Zhang ◽  
Lizhu Liu ◽  
Ruqin Fan ◽  
...  
Keyword(s):  
Water Hyacinth ◽  
Freundlich Isotherm ◽  
Root Surface ◽  
Interactive Effects ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Batch experiments were conducted to investigate the adsorption characteristics of tetracycline (TC), and the interactive effects of copper (Cu) on the adsorption of TC onto water hyacinth roots. TC removal efficiency by water hyacinth roots was ranging from 58.9% to 84.6%, for virgin TC, 1:1 TC-Cu and 1:2 TC-Cu. The Freundlich isotherm model and the pseudo-second-order kinetic model fitted the adsorption data well. Thermodynamics parameters ΔG0 for TC were more negative in the TC plus Cu than the TC-only treatments, indicating the spontaneity of TC adsorption increased with increasing of Cu concentrations. An elevated temperature was associated with increasing adsorption of TC by water hyacinth roots. The additions of Cu(II) significantly increased TC adsorption onto water hyacinth roots within the pH range 4 to 6, because copper formed a strong metal bridge between root surface and TC molecule, facilitating the adsorption of TC by roots. However, Cu(II) hindered TC adsorption onto water hyacinth roots on the whole at pH range from 6–10, since the stronger electrostatic repulsion and formation of CuOH+ and Cu(OH)2. Therefore, the interaction between Cu(II) and TC under different environmental conditions should be taken into account to understand the environmental behavior, fate, and ecotoxicity of TC.

scholarly journals Construction of Novel Polymerizable Ionic Liquid Microemulsions and the In Situ Synthesis of Poly(Ionic Liquid) Adsorbents

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 454 ◽  
Author(s):  
Aili Wang ◽  
Shuhui Li ◽  
Hou Chen ◽  
Ying Liu ◽  
Xiong Peng
Keyword(s):  
Ionic Liquid ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
In Situ Synthesis ◽  
Scattering Data ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ionic Liquid

This paper reports the successful construction of novel polymerizable ionic liquid microemulsions and the in situ synthesis of poly(ionic liquid) adsorbents for the removal of Zn2+ from aqueous solution. Dynamic light-scattering data were used to confirm the polymerization media and to illustrate the effect of the crosslinker dosage on the droplet size of the microemulsion. FTIR and thermal analysis were employed to confirm the successful preparation of the designed polymers and characterize their thermostability and glass transition-temperature value. The optimization of the adsorption process indicates that the initial concentration of Zn2+, pH, adsorbent dosage and contact time affected the adsorption performance of poly(ionic liquid)s toward Zn2+. Furthermore, our research revealed that the adsorption process can be effectively described by the pseudo second-order kinetic model and the Freundlich isotherm model.

Removal of fluoride from aqueous solution by adsorption onto Kanuma mud

2010 ◽  
Vol 62 (8) ◽  
pp. 1888-1897 ◽  
Author(s):  
Nan Chen ◽  
Zhenya Zhang ◽  
Chuanping Feng ◽  
Miao Li ◽  
Rongzhi Chen ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Fluoride Concentration ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Solution Ph ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Solid Liquid Interface ◽  
Solid Liquid

Kanuma mud, a geomaterial, is used as an adsorbent for the removal of fluoride from water. The influences of contact time, solution pH, adsorbent dosage, initial fluoride concentration and co-existing ions were investigated by batch equilibration studies. The rate of adsorption was rapid with equilibrium being attained after about 2 h, and the maximum removal of fluoride was obtained at pH 5.0–8.0. The Freundlich isotherm model was found to represent the measured adsorption data well. The negative value of the thermodynamic parameter ΔG suggests the adsorption of fluoride by Kanuma mud was spontaneous, the endothermic nature of adsorption was confirmed by the positive ΔH value. The negative ΔS value for adsorbent denoted decreased randomness at the solid/liquid interface. The adsorption process using Kanuma mud followed the pseudo-second-order kinetic model. Fluoride uptake by the Kanuma mud was a complex process and intra-particle diffusion played a major role in the adsorption process. It was found that adsorbed fluoride could be easily desorbed by washing the adsorbent with a solution of pH 12. This indicates the material could be easily recycled.

Removal of Rhodamine B from Wastewater by Rectorite and Sepiolite-Kinetic Study and Equilibrium Isotherm Analyses

2011 ◽  
Vol 183-185 ◽  
pp. 362-366 ◽  
Author(s):  
Jun Li ◽  
Ming Zhen Hu
Keyword(s):  
Rhodamine B ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Order Kinetic ◽  
Isotherm Equation ◽  
Adsorption Removal ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Adsorption removal of a cationic dye, rhodamine B (RhB) from water onto rectorite and sepiolite was investigated. The rectorite and sepiolite were characterized by Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). Attempts were made to fit the isothermal data using Langmuir and Freundlich equations. The experimental results have demonstrated that the equilibrium data are fitted well by a Freundlich isotherm equation. Pseudo-first-order and pseudo-second-order models were considered to evaluate the rate parameters. The experimental data were well described by the pseudo-second-order kinetic model. The results indicate that the rectorite exhibited higher adsorption capacity for the removal of RhB than sepiolite and could be employed as a low-cost alternative in wastewater treatment for the removal of cationic dyes.

scholarly journals Removal of antibiotic Ciprofloxacin Hydrochloride from water by Kandira stone: Kinetic models and thermodynamic

2015 ◽  
Vol 17 (3) ◽  
pp. 498-507 ◽  
Keyword(s):  
Freundlich Isotherm ◽  
Entropy Change ◽  
Building Stone ◽  
Order Kinetic ◽  
Sorption Data ◽  
Ciprofloxacin Hydrochloride ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Rate Controlling Step ◽  
Cladding Material

<div> <p>In this study, Kandira stone, extensively used as a cladding material for building stone has been examined for the removal of an antibiotic Ciprofloxacin hydrochloride (CIP) from its aqueous solution. Batch experiments were performed to investigate the adsorption kinetics, equilibrium and thermodynamics between the adsorbent surfaces and CIP. The sorption data follows Freundlich isotherm. A chemical adsorption was dominant. The adsorption behaviour of CIP onto Kandira stone followed the pseudo-second-order kinetic model, indicating that the adsorption process can be expressed with the chemisorption mechanism. The intraparticle diffusion process is a rate-controlling step. The adsorption thermodynamic parameters of the free energy change (∆G<sup>o</sup>), the isosteric enthalpy change (∆H<sup>o</sup>) and the entropy change (∆S<sup>o</sup>) were calculated. The negative ∆H<sup>o</sup> values indicated that sorption of CIP was the exothermic process. The positive value of ∆G<sup>o</sup> indicates non-spontaneous nature of CIP adsorption.&nbsp;</p> </div> <p>&nbsp;</p>

scholarly journals Itaconic acid-modified layered double hydroxide as a ‎novel adsorbent for effective removal of Congo red from aqueous solutions

2021 ◽  
Author(s):  
Mohammad Dinari ◽  
Shirin Shabani
Keyword(s):  
Layered Double Hydroxide ◽  
Itaconic Acid ◽  
Congo Red ◽  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order ◽  
Double Hydroxide

Abstract Herein, we report the synthesis of Cu-Ca-Al/NO3-based layered double hydroxide through co-precipitation methodology. The prepared layered double hydroxide was then modified with itaconic acid. The physicochemical properties of the prepared materials were studied using Fourier transform-infrared spectroscopy, scanning electron microscopy, X-ray diffraction analysis, thermogravimetric analysis, and nitrogen adsorption/desorption technique. The prepared materials were then applied as novel adsorbents for the removal of Congo red as a model of an anionic dye from aqueous media. To reach maximum adsorption, the effect of parameters including sample solution pH, adsorbent amount, contact time, and initial concentration of Congo red on the adsorption process was investigated. Kinetic studies were also conducted to study the mechanism of adsorption. In this regard, the kinetic models of pseudo-first-order, pseudo-second-order, Elovich, and intra-particle diffusion were studied. The results showed that the adsorption of Congo red onto Cu-Ca-Al-LDH and LDH-ITA adsorbents followed the pseudo-second-order kinetic model. To evaluate the equilibrium adsorption data, different isotherms including Langmuir, Freundlich, and Dubinin-Radushkevich were also applied. The data revealed that the Freundlich isotherm provided the best fit with the equilibrium data of both adsorbents. Maximum adsorption capacities of 81 and 84 mg g− 1 were obtained using Cu-Ca-Al-LDH and LDH-ITA adsorbents, respectively.

Sign in / Sign up

Export Citation Format

Share Document