Mandibular Position in Class III Malocclusion

1988 ◽  
Vol 15 (4) ◽  
pp. 241-245 ◽  
Author(s):  
W. J. S. Kerr ◽  
T. R. TenHave

Lateral skull radiographs of 66 subjects with Class III malocclusion, characterized by lingual occlusion of the upper incisors and a degree of overbite, taken before and after treatment were compared with a Control Group of similar mean age and interval between films. Vertical, Horizontal and Oblique measurements were made to establish the part played by overclosure and anterior displacement of the mandible in the aetiology of Class III malocclusion. The results suggest that both may play a part but that the former is of more general significance than the latter.

2019 ◽  
Vol 31 (4) ◽  
pp. 883-888
Author(s):  
Sofija Carceva Shalja ◽  
Sandra Atanasova

Developing Class III Malocclusion in most of the cases affects dentofacial appearance. The goal of this study is to investigate the changes in the facial appearances in treated patients withFace mask orthopedic treatment and untreated Class III patients. The sample consisted 49 patients (boys and girls),with average age of 9 years, who had a Class III Malocclusion with an anterior crossbite and a component of maxillary deficiency. 28 of them were treated with protraction Face mask- Delair mask (petit tipe), and the other 21 were presenting the control group consisted of untreated Class III Patients.In treated group pretreatment and posttreatment cephalometric radiographs from 28 patients(15 males and 13 females) were analyzed and compared with the results of cephalometric analyzes in untreated group(observation period of 1 year). Results from these study showed forward displacement of maxilla(SNA p<0.05),increasing of maxillary length(Co-A p<0.05)correction of maxillary-mandibular relationship(ANB p<0.05) in treated group while in untreated groupvalues for the parameters in the upper jaw and inter jaw relationship before and after the observation period of 1 yearshowed no statistically significant changes pointing to the negative impact of incorrect skeletal terms in Class III growing patients.Based on our findings we can concluded that in Class III patients there is a big motivation for orthodontic treatment because their dentofacial appearance deviates from sociocultural norms.Therefore, an important objective of accepting maxillary protraction treatment in Class III malocclusion is providing nonsurgical alternative in the treatment and improving the physico-social wellbeing and appearance of the patients, especially during their teenage years.


2017 ◽  
Vol 18 (5) ◽  
pp. 410-414
Author(s):  
Mohamed I Hashem ◽  
Zeeshan H Ahmad ◽  
Sukumaran Anil ◽  
Khalid J Alanazi

ABSTRACT Introduction Chin cup (CC) therapy has been used as the traditional appliance for treating class III malocclusion during mixed dentition period. The aim of this study was to investigate the effect of CC on the improvement of skeletal and dentoalveolar skeletal changes in class III patients during mixed dentition stage. Materials and methods A total of 30 patients (7–9 years old) with skeletal class III malocclusion were selected based on clinical and cephalometric examination. Out of 30 patients, 20 underwent CC therapy. All orthodontic records and measurements were taken before and after treatment. Similar records were collected from the control group. The lateral cephalometric films were traced before and after treatment and analyzed. Results There was a significant improvement in maxillary and the mandibular skeletal measurements after CC therapy. Improvement of ANB angle and an increase in Wits appraisal have been detected in the treated group according to intermaxillary skeletal variables. Conclusion The study concluded that the CC therapy is effective for correcting skeletal class III malocclusion along with positive changes in the dentoskeletal variables during the mixed dentition stage. How to cite this article Al-Khalifa HN, Hashem MI, Alanazi KJ, Anil S. Orthopedic Effect of Chin Cup during Mixed Dentition Stage. J Contemp Dent Pract 2017;18(5):410-414.


2008 ◽  
Vol 87 (9) ◽  
pp. 856-860 ◽  
Author(s):  
W.H. Ruan ◽  
J.N. Winger ◽  
J.C. Yu ◽  
J.L. Borke

The etiology of class III malocclusion remains unknown. The present study investigates the relationship between craniofacial morphology and premaxillary suture fusion to test the hypothesis that class III malocclusion may be related to premaxillary suture fusion. Cyanoacrylate was applied to immobilize the left premaxillary suture in the experimental group. Sham surgeries in rats were used for controls. Dental impressions and radiographs were taken before and after surgery for comparison of craniofacial differences between groups. Overall cranial base lengths, craniofacial widths, and craniofacial angulations related to the anterior base showed significant differences between groups. At the end of the experiment, the growth of the snout in the experimental group was inhibited and deviated to the treated side, while no obvious change was seen in the control group. The results show that induced premaxillary suture fusion can affect craniofacial morphology and indicate that premature premaxillary suture fusion may result in class III malocclusion.


1987 ◽  
Vol 14 (4) ◽  
pp. 243-249 ◽  
Author(s):  
W. J. S. Kerr ◽  
T. R. Ten Have

The changes in soft tissue profile for 66 Angle's Class III malocclusion subjects treated either with the Function Regulator, or Upper Removable Appliances, or the Edgewise Appliance were assessed by comparing cephalometric radiographs taken before and after correction of the anterior occlusion. While the mean soft tissue profile in all groups improved in relation to a Control Group, the F R. III Group demonstrated the most profound change.


Author(s):  
Anjana Atteeri ◽  
Praveen Kumar Neela ◽  
Pavan Kumar Mamillapalli ◽  
Vasu M. Sesham ◽  
Sreekanth Keesara ◽  
...  

Abstract Background Mandibular prognathism (MP) is a craniofacial deformity resulting from the combined effects of environmental and genetic factors. Although various linkage and genome-wide association studies for mandibular prognathism have identified multiple strongly associated regions and genes, the causal genes and variants responsible for the deformity remained ambiguous. Aim This research work was aimed to study the association between polymorphism rs10850110 of the MYO1H gene and skeletal class-III malocclusion in our local population. Materials and Methods Thirty patients with skeletal class III due to mandibular prognathism in the study group and 30 patients with skeletal class I in the control group were selected for this study. These patients were from both sexes and above age 10 years. Based on the cephalometric values, patients were categorized into study and control groups. SNB (angle between sella, nasion and point B at nasion) greater than 82 degrees with an ANB (angle between point A, nasion and point B at nasion) of less than 0 degrees in the study group and ANB (angle between point A, nasion and point B at nasion) of 2 to 4 degrees in the control group were categorized. The polymorphism (rs10850110) of the MYO1H gene was genotyped using polymerase chain reaction and restriction fragment length polymorphism. Associations were tested with SNP exact test using SNPstats software. Results The single-nucleotide polymorphism rs10850110 showed a statistically significant association with mandibular prognathism. The G allele of marker rs10850110 (5′ of myosin1H - MYO1H) was overrepresented when compared with the “A” allele in mandibular prognathism cases (p < 0.0001), and this was very significant. Conclusion These results suggest that the rs10850110 polymorphism of the MYO1H gene is associated with an increased risk for mandibular prognathism.


2021 ◽  
Vol 11 (6) ◽  
pp. 2520
Author(s):  
Andrea Deregibus ◽  
Simone Parrini ◽  
Maria Chiara Domini ◽  
Jacopo Colombini ◽  
Tommaso Castroflorio

Many studies report that maxillofacial growth is influenced by genetic and environmental elements and that incorrect breathing, chewing, sucking, and swallowing are promoting factors of malocclusion. This study aims to evaluate the function and the influence of the tongue positions in patients with Angle class III malocclusion, maxillary hypoplasia, and posterior crossbite. One hundred patients, aged between 6 and 12 years old, were enrolled for the study. In the first group, patients with a diagnosis of class III malocclusion, affected by maxillary hypoplasia, skeletal class III, and posterior dental crossbite were recruited. In the control group, not treated patients with no malocclusion, skeletal class I, and without posterior dental crossbite were selected. Regarding atypical deglutition, no statistical differences were reported between the two groups, and 14% of patients reported ankyloglossia. Statistical differences were found in tongue rest position and during the execution of “hold and pull” and “chuck” exercises. Results obtained in this observational study showed that the clinician (orthodontist or general dentist) should analyze the presence/absence of atypical swallowing, the anatomical and functional aspects, and the tongue behavior in the rest position.


2021 ◽  
Vol 10 (34) ◽  
pp. 2954-2959
Author(s):  
Shilpa Venkatesh Pharande

The Alt-RAMEC protocol was introduced by Liou in the year 2005. It allows for sutural mobilisation by opening and closing the RME screw for 7-9 weeks. Maxillary protraction after the use of Alt-Ramec (alternate rapid maxillary expansion and contraction) protocol is an efficient method for early treatment of skeletal Class III malocclusion. This case report shows the results of using a hyrax bonded maxillary expander with the Alt-RAMEC protocol to treat a maxillary hypoplasia Class III malocclusion. A 12-year-old patient with skeletal class III malocclusion with anterior as well as the unilateral posterior crossbite was treated using this protocol. CBCT scans were taken before and after expansion. These CBCT scans were used for assessing and analysing the skeletal changes that have occurred after using the AltRamec protocol. The objective of this case report is to assess skeletal changes after using the Alt-RAMEC protocol.


2016 ◽  
Vol 87 (2) ◽  
pp. 269-278 ◽  
Author(s):  
Chang-Hoon Lee ◽  
Hyun-Hee Park ◽  
Byoung-Moo Seo ◽  
Shin-Jae Lee

ABSTRACT Objective: To examine the current trends in surgical-orthodontic treatment for patients with Class III malocclusion using time-series analysis. Materials and Methods: The records of 2994 consecutive patients who underwent orthognathic surgery from January 1, 2004, through December 31, 2015, at Seoul National University Dental Hospital, Seoul, Korea, were reviewed. Clinical data from each surgical and orthodontic treatment record included patient's sex, age at the time of surgery, malocclusion classification, type of orthognathic surgical procedure, place where the orthodontic treatment was performed, orthodontic treatment modality, and time elapsed for pre- and postoperative orthodontic treatment. Results: Out of the orthognathic surgery patients, 86% had Class III malocclusion. Among them, two-jaw surgeries have become by far the most common orthognathic surgical treatment these days. The age at the time of surgery and the number of new patients had seasonal variations, which demonstrated opposing patterns. There was neither positive nor negative correlation between pre- and postoperative orthodontic treatment time. Elapsed orthodontic treatment time for both before and after Class III orthognathic surgeries has been decreasing over the years. Conclusion: Results of the time series analysis might provide clinicians with some insights into current surgical and orthodontic management.


2018 ◽  
Vol 88 (5) ◽  
pp. 649-664 ◽  
Author(s):  
Luca Lombardo ◽  
Antonella Carlucci ◽  
Bortolo Giuliano Maino ◽  
Anna Colonna ◽  
Emanuele Paoletto ◽  
...  

ABSTRACT This case report describes the use of a miniscrew-assisted rapid palatal expander and aligners to correct bilateral cross-bite and crowding in an adult patient with a Class III skeletal pattern. A digitally designed surgical guide was three-dimensionally printed and used to accurately insert four miniscrews into the palate; these were employed to anchor a novel miniscrew-assisted rapid palatal expander appliance without any dental anchorage. Cone-beam computed tomograms before and after miniscrew-assisted rapid palatal expander treatment demonstrated the orthopedic expansion of the maxilla without dental tipping. The patient was then fitted with aligners to correct crowding and malocclusion. This case report demonstrates the successful treatment of an adult patient with a narrow maxilla and bilateral cross-bite using a nonsurgical, conservative treatment.


1989 ◽  
Vol 16 (3) ◽  
pp. 201-206 ◽  
Author(s):  
Andrew P. Toms

The records of 500 consecutive Saudi Arabian patients referred for orthodontic treatment were examined clinically and cephalometrically for Class III malocclusion. A control group was drawn at random from the same sample. The incidence of Class III was 9·4 per cent, with mandibular prognathism being the commonest presentation of the malocclusion. The upper and lower incisors exhibited a marked degree of dentoalveolar compensation, on dental bases having mean values of SNA—78·77° and SNB—81·17°. The maxillary length was reduced, as were the saddle and maxillary—mandibular plane angles. The gonial angle (ArGoMe), anterior and posterior facial heights, and mandibular lengths (ArGo, ArPo) were all significantly larger than the control group. The cephalometric values of the control group showed the increased tendency to bimaxillary protrusion in the Saudi Arabian sample.


Sign in / Sign up

Export Citation Format

Share Document