scholarly journals Preliminary operational aspects of microwave-powered airship drone

2019 ◽  
Vol 11 ◽  
pp. 175682931986136 ◽  
Author(s):  
Kyo D Song ◽  
Jaehwan Kim ◽  
Jung W Kim ◽  
Yeonjoon Park ◽  
Jay J Ely ◽  
...  

This paper reports the development of an experimental airship drone powered by microwave as a precursor toward a large-scale airship drone for cargo transportation in mind under the collaboration with U.S. Federal Highway Administration and universities. Research work on a 2.2-m long airship drone powered by X-band microwave has provided sufficient data for the design and analysis for the operation of airship drone. A block of 16 rectenna array sheets of X-band was placed on each side of the airship drone (total 32 sheets) to collect and convert microwave power into direct current power for running the electrical propulsion system. The demonstration of the airship drone operation, powered only by microwave, was successfully performed inside the High Intensity Radiation Facility chamber located at NASA Langley Research Center. The data show the feasibility of practical use of microwave power for a transportation airship drone.

2019 ◽  
Author(s):  
Chem Int

This research work presents a facile and green route for synthesis silver sulfide (Ag2SNPs) nanoparticles from silver nitrate (AgNO3) and sodium sulfide nonahydrate (Na2S.9H2O) in the presence of rosemary leaves aqueous extract at ambient temperature (27 oC). Structural and morphological properties of Ag2SNPs nanoparticles were analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface Plasmon resonance for Ag2SNPs was obtained around 355 nm. Ag2SNPs was spherical in shape with an effective diameter size of 14 nm. Our novel approach represents a promising and effective method to large scale synthesis of eco-friendly antibacterial activity silver sulfide nanoparticles.


1990 ◽  
Vol 22 (3-4) ◽  
pp. 291-298
Author(s):  
Frits A. Fastenau ◽  
Jaap H. J. M. van der Graaf ◽  
Gerard Martijnse

More than 95 % of the total housing stock in the Netherlands is connected to central sewerage systems and in most cases the wastewater is treated biologically. As connection to central sewerage systems has reached its economic limits, interest in on-site treatment of the domestic wastewater of the remaining premises is increasing. A large scale research programme into on-site wastewater treatment up to population equivalents of 200 persons has therefore been initiated by the Dutch Ministry of Housing, Physical Planning and Environment. Intensive field-research work did establish that the technological features of most on-site biological treatment systems were satisfactory. A large scale implementation of these systems is however obstructed in different extents by problems of an organisational, financial and/or juridical nature and management difficulties. At present research is carried out to identify these bottlenecks and to analyse possible solutions. Some preliminary results are given which involve the following ‘bottlenecks':-legislation: absence of co-ordination and absence of a definition of ‘surface water';-absence of subsidies;-ownership: divisions in task-setting of Municipalities and Waterboards; divisions involved with cost-sharing;-inspection; operational control and maintenance; organisation of management;-discharge permits;-pollution levy;-sludge disposal. Final decisions and practical elaboration of policies towards on-site treatment will have to be formulated in a broad discussion with all the authorities and interest groups involved.


2020 ◽  
Vol 27 ◽  
Author(s):  
Zaheer Ullah Khan ◽  
Dechang Pi

Background: S-sulfenylation (S-sulphenylation, or sulfenic acid) proteins, are special kinds of post-translation modification, which plays an important role in various physiological and pathological processes such as cytokine signaling, transcriptional regulation, and apoptosis. Despite these aforementioned significances, and by complementing existing wet methods, several computational models have been developed for sulfenylation cysteine sites prediction. However, the performance of these models was not satisfactory due to inefficient feature schemes, severe imbalance issues, and lack of an intelligent learning engine. Objective: In this study, our motivation is to establish a strong and novel computational predictor for discrimination of sulfenylation and non-sulfenylation sites. Methods: In this study, we report an innovative bioinformatics feature encoding tool, named DeepSSPred, in which, resulting encoded features is obtained via n-segmented hybrid feature, and then the resampling technique called synthetic minority oversampling was employed to cope with the severe imbalance issue between SC-sites (minority class) and non-SC sites (majority class). State of the art 2DConvolutional Neural Network was employed over rigorous 10-fold jackknife cross-validation technique for model validation and authentication. Results: Following the proposed framework, with a strong discrete presentation of feature space, machine learning engine, and unbiased presentation of the underline training data yielded into an excellent model that outperforms with all existing established studies. The proposed approach is 6% higher in terms of MCC from the first best. On an independent dataset, the existing first best study failed to provide sufficient details. The model obtained an increase of 7.5% in accuracy, 1.22% in Sn, 12.91% in Sp and 13.12% in MCC on the training data and12.13% of ACC, 27.25% in Sn, 2.25% in Sp, and 30.37% in MCC on an independent dataset in comparison with 2nd best method. These empirical analyses show the superlative performance of the proposed model over both training and Independent dataset in comparison with existing literature studies. Conclusion : In this research, we have developed a novel sequence-based automated predictor for SC-sites, called DeepSSPred. The empirical simulations outcomes with a training dataset and independent validation dataset have revealed the efficacy of the proposed theoretical model. The good performance of DeepSSPred is due to several reasons, such as novel discriminative feature encoding schemes, SMOTE technique, and careful construction of the prediction model through the tuned 2D-CNN classifier. We believe that our research work will provide a potential insight into a further prediction of S-sulfenylation characteristics and functionalities. Thus, we hope that our developed predictor will significantly helpful for large scale discrimination of unknown SC-sites in particular and designing new pharmaceutical drugs in general.


2018 ◽  
Vol 12 (03) ◽  
pp. 1850007 ◽  
Author(s):  
J. P. Narayan ◽  
A. Kumar

The effects of ridge and valley on the characteristics of Rayleigh waves are presented in this paper. The research work carried out has been stimulated by the day by day increase of long-span structures in the hilly areas which are largely affected by the spatial variability in ground motion caused by the high-frequency Rayleigh waves. The Rayleigh wave responses of the considered triangular and elliptical ridge and valley models were computed using a fourth-order accurate staggered-grid viscoelastic P-SV wave finite-difference (FD) program. The simulated results revealed very large amplification of the horizontal component and de-amplification of the vertical component of Rayleigh wave at the top of a triangular ridge and de-amplification of both the components at the base of the triangular valley. The observed amplification of both the components of Rayleigh wave in front of elliptical valley was larger than triangular valley models. A splitting of the Rayleigh wave wavelet was inferred after interaction with ridge and valley. It is concluded that the large-scale topography acts as a natural insulator for the surface waves and the insulating capacity of the valley is more than that of a ridge. This insulation phenomenon is arising due to the reflection, diffraction and splitting of the surface wave while moving across the topography. It is concluded that insulating potential of the topography for the Rayleigh waves largely depends on their shape and shape-ratio.


2016 ◽  
Vol 27 (1) ◽  
pp. 15-21 ◽  
Author(s):  
M Kumaresan

Purpose – The purpose of this paper is to extract the eco-friendly natural dye obtained from the flower of Spathodea campanulata and apply on silk fabric using combination of mordants. The fastness properties of the flower of Spathodea campanulata dyed silk fabric have been studied using different combination (1:3, 1:1 and 3:1) of various mordants, such as myrobolan: nickel sulphate, myrobolan: aluminium sulphate, myrobolan: potassium dichromate, myrobolan: ferrous sulphate and myrobolan: stannous chloride. The wash, rub, light and perspiration fastness of the dyed samples have been evaluated. Design/methodology/approach – For dyeing there are three methods are used. They are Pre mordanting, Simultaneous mordanting and Post mordanting methods. Dyed silk materials are tested by using wash fastness, rub fastness, light and perspiration fastness methods. Findings – It is found that Spathodea campanulata dye can be successfully used for the dyeing of silk to obtain a wide range colours by using various combinations of mordants. With regards to colour fastness, test samples exhibit excellent fastness to washing, rubbing, except for pre-mordanting using myrobolan: potassium dichromate combination; and good to excellent fastness to perspiration in both acidic and alkaline media. Originality/value – Availability of literature related to this work is not available. The study of combination of mordants of this natural dye on silk is a new research work and the large scale preparation is definitely very useful to the society.


Author(s):  
Masato Matsumoto ◽  
Kyle Ruske

<p>Condition ratings of bridge components in the Federal Highway Administration (FHWA)’s Structural Inventory and Appraisal database are determined by bridge inspectors in the field, often by visual confirmation or direct- contact sounding techniques. However, the determination of bridge condition ratings is generally subjective depending on individual inspectors’ knowledge and experience, as well as varying field conditions. There are also limitations to access, unsafe working conditions, and negative impacts of lane closures to account for. This paper describes an alternative method to obtaining informative and diagnostic inspection data for concrete bridge decks: mobile nondestructive bridge deck evaluation technology. The technology uses high- definition infrared and visual imaging to monitor bridge conditions over long-term (or desired) intervals. This combination of instruments benefits from rapid and large-scale data acquisition capabilities. Through its implementation in Japan over the course of two decades, the technology is opening new possibilities in a field with much untapped potential. Findings and lessons learned from our experience in the states of Virginia and Pennsylvania are described as examples of highway-speed mobile nondestructive evaluation in action. To validate the accuracy of delamination detection by the visual and infrared scanning, findings were proofed by physical sounding of the target deck structures.</p>


2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Hua-Wei Zhou ◽  
Xue-Xia Yang ◽  
Sajjad Rahim

Beam capture efficiency (BCE) is one key factor of the overall efficiency for a microwave power transmission (MPT) system, while sparsification of a large-scale transmitting array has a practical significance. If all elements of the transmitting array are excited uniformly, the fabrication, maintenance, and feed network design would be greatly simplified. This paper describes the synthesis method of the sparse uniform-amplitude transmitting array with concentric ring layout using particle swarm optimization (PSO) algorithm while keeping a higher BCE. Based on this method, uniform exciting strategy, reduced number of elements, and a higher BCE are achieved simultaneously for optimal MPT. The numerical results of the sparse uniform-amplitude concentric ring arrays (SUACRAs) optimized by the proposed method are compared with those of the random-located uniform-amplitude array (RLUAA) and the stepped-amplitude array (SAA), both being reported in the literatures for the maximum BCE. Compared to the RLUAA, the SUACRA saves 32% elements with a 1.1% higher BCE. While compared to the SAA, the SUACRA saves 29.1% elements with a bit higher BCE. The proposed SUACRAs have higher BCEs, simple array arrangement and feed network, and could be used as the transmitting array for a large-scale MPT system.


2015 ◽  
Vol 138 (4) ◽  
Author(s):  
Dionysios P. Xenos ◽  
Erling Lunde ◽  
Nina F. Thornhill

This paper presents a framework which integrates maintenance and optimal operation of multiple compressors. The outcome of this framework is a multiperiod plan which provides the schedule of the operation of compressors: the schedule gives the best decisions to be taken, for example, when to carry out maintenance, which compressors to use online and how much to load them. These decisions result in the minimization of the total operational costs of the compressors while at the same time the demand of the plant is met. The suggested framework is applied to an industrial gas compressor station which encompasses large multistage centrifugal compressors operating in parallel. The optimization model of the framework consists of three main parts: the models of compressor maps, the operational aspects of compressors, and a maintenance model. The results illustrate the optimal schedule for 90 days and an example of the optimal distribution of the load of the compressors for 5 days. Finally, the results show the economical benefits from the integration of maintenance and optimization.


2018 ◽  
Vol 14 (A30) ◽  
pp. 319-322 ◽  
Author(s):  
M. Kierdorf ◽  
S. A. Mao ◽  
A. Fletcher ◽  
R. Beck ◽  
M. Haverkorn ◽  
...  

AbstractAn excellent laboratory for studying large scale magnetic fields is the grand design face-on spiral galaxy M51. Due to wavelength-dependent Faraday depolarization, linearly polarized synchrotron emission at different radio frequencies gives a picture of the galaxy at different depths: Observations at L-band (1 – 2 GHz) probe the halo region while at C- and X-band (4 – 8 GHz) the linearly polarized emission probe the disk region of M51. We present new observations of M51 using the Karl G. Jansky Very Large Array (VLA) at S-band (2 – 4 GHz), where previously no polarization observations existed, to shed new light on the transition region between the disk and the halo. We discuss a model of the depolarization of synchrotron radiation in a multilayer magneto-ionic medium and compare the model predictions to the multi-frequency polarization data of M51 between 1 – 8 GHz. The new S-band data are essential to distinguish between different models. Our study shows that the initial model parameters, i.e. the total regular and turbulent magnetic field strengths in the disk and halo of M51, need to be adjusted to successfully fit the models to the data.


Sign in / Sign up

Export Citation Format

Share Document