scholarly journals A fatigue crack initiation and growth life estimation method in single-bolted connections

2019 ◽  
Vol 54 (2) ◽  
pp. 79-94 ◽  
Author(s):  
Arash P Jirandehi ◽  
TN Chakherlou
Keyword(s):  
Fatigue Crack ◽  
Fatigue Life ◽  
Crack Initiation ◽  
Crack Growth ◽  
Fatigue Crack Initiation ◽  
Multiaxial Fatigue ◽  
Estimation Accuracy ◽  
Life Estimation ◽  
Lower Error ◽  
Fatigue Life Estimation

Fatigue life estimation accuracy of mechanical parts and assemblies has always been the source of concern in different industries. The main contribution of this article lies in a study on the accuracy of different multiaxial fatigue criteria, proposing and investigating the accuracy of four optimized fatigue crack initiation life estimation methods—volume, weighted volume, surface and point, thereby improving the multiaxial fatigue life estimation accuracy. In order to achieve the goal, the fatigue lives of bolt clamped specimens, previously tested under defined experimental conditions, were estimated during fatigue crack initiation and fatigue crack growth and then summed together. In the fatigue crack initiation part, a code was written and used in the MATLAB software environment based on critical plane approach and the different multiaxial fatigue criteria. Besides the AFGROW software was utilized to estimate the crack growth share of fatigue life. Experimental and numerical results showed to be in agreement. Furthermore, detailed study and comparison of the results with the available experimental data showed that a combination of Smith–Watson–Topper approach and volume method results in lower error values, while a combination of Fatemi–Socie criterion and surface or point method presents estimated lives with lower error values. In addition, the numerical proposed procedure resulted in a good prediction of the location of fatigue crack initiation.

The Energy Based Approach to Fatigue

2014 ◽  
Vol 891-892 ◽  
pp. 821-826 ◽  
Author(s):  
Narayanaswami Ranganathan
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Crack Propagation ◽  
Fatigue Crack Propagation ◽  
Fatigue Crack Initiation ◽  
Multiaxial Fatigue ◽  
Metallic Material ◽  
Life Estimation ◽  
Synthetic Rubber ◽  
Fatigue Life Estimation

This paper presents the energy based approaches developed to describe different aspects of fatigue. Different topics covered include fatigue crack initiation, crack initiation at a notch, multiaxial fatigue and fatigue crack propagation. Specific examples treated include, crack initiation at a notch, cracking at solder joint in electronic application, fatigue life estimation in a synthetic rubber and fatigue crack propagation in a metallic material.

Effect of Processing Layer on Fatigue Strength of Extruded AZ61 Magnesium Alloy

2013 ◽  
Vol 577-578 ◽  
pp. 429-432 ◽  
Author(s):  
Yukio Miyashita ◽  
Kyohei Kushihata ◽  
Toshifumi Kakiuchi ◽  
Mitsuhiro Kiyohara
Keyword(s):  
Fatigue Crack ◽  
Fatigue Life ◽  
Fatigue Strength ◽  
Magnesium Alloy ◽  
Crack Initiation ◽  
Crack Growth ◽  
Fatigue Crack Initiation ◽  
Fatigue Tests ◽  
Crack Growth Resistance ◽  
Az61 Magnesium Alloy

Fatigue Property of an Extruded AZ61 Magnesium Alloy with the Processing Layer Introduced by Machining was Investigated. Rotating Bending Fatigue Tests were Carried out with the Specimen with and without the Processing Layer. According to Results of the Fatigue Tests, Fatigue Life Significantly Increased by Introducing the Processing Layer to the Specimen Surface. Fatigue Crack Initiation and Propagation Behaviors were Observed by Replication Technique during the Fatigue Test. Fatigue Crack Initiation Life of the Specimen with the Processing Layer was Slightly Longer than that of the Specimen without the Processing Layer. Higher Fatigue Crack Growth Resistance was also Observed when the Fatigue Crack was Growing in the Processing Layer in the Specimen with the Processing Layer. the Longer Fatigue Life Observed in the Fatigue Test in the Specimen with the Processing Layer could be Mainly due to the Higher Crack Growth Resistance. it is Speculated that the Fatigue Strength can be Controlled by Change in Condition of Machining Process. it could be Effective way in Industry to Improved Fatigue Strength only by the Cutting Process without Additional Surface Treatment Process.

A Probabilistic Micromechanical Code for Predicting Fatigue Life Variability: Model Development and Application

2005 ◽  
Vol 128 (4) ◽  
pp. 889-895 ◽  
Author(s):  
K. S. Chan ◽  
M. P. Enright
Keyword(s):  
Fatigue Crack ◽  
Fatigue Life ◽  
Fatigue Crack Growth ◽  
Crack Initiation ◽  
Crack Growth ◽  
Model Development ◽  
Fatigue Crack Initiation ◽  
Crack Size ◽  
Crack Initiation Life ◽  
Variability Model

This paper summarizes the development of a probabilistic micromechanical code for treating fatigue life variability resulting from material variations. Dubbed MICROFAVA (micromechanical fatigue variability), the code is based on a set of physics-based fatigue models that predict fatigue crack initiation life, fatigue crack growth life, fatigue limit, fatigue crack growth threshold, crack size at initiation, and fracture toughness. Using microstructure information as material input, the code is capable of predicting the average behavior and the confidence limits of the crack initiation and crack growth lives of structural alloys under LCF or HCF loading. This paper presents a summary of the development of the code and highlights applications of the model to predicting the effects of microstructure on the fatigue crack growth response and life variability of the α+β Ti-alloy Ti-6Al-4V.

The Fatigue Life Estimation Method From the Stress Concentration Region With Zero Defect: An Application to the Fatigue Crack Growth Simulation Code “FLARP” for the In-Plane Gusset Welded Joint

2004 ◽  
Author(s):  
Masahiro Toyosada ◽  
Koji Gotoh ◽  
Keitaro Konuma ◽  
Akira Sueda
Keyword(s):  
Fatigue Crack ◽  
Fatigue Life ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Crack Opening ◽  
Simulation Code ◽  
Growth Simulation ◽  
Life Estimation ◽  
Crack Growth Simulation ◽  
Fatigue Life Estimation

In-plane gusset welded joints are very popular and used in many steel constructed structures. Fatigue life estimations for this type of joint have been performed by applying the fatigue crack growth simulation code “FLARP” developed by the authors. The fatigue crack shows the typical opening/closing behavior during fatigue crack growth. The plastic deformed layer in the crack wake, which represents the loading history indirectly, contributes to the behavior. The consideration of crack closure is essential in the estimation of the fatigue life. FLARP enables the quantitative simulation of the fatigue crack opening/closing. By considering the cyclic plastic behavior ahead of a fatigue crack tip, the improved effective stress intensity factor range (ΔKRPG) to denote the fatigue crack propagation law, which is formulated by replacing the crack opening load with the Retensile Plastic zone Generating load (RPG load), was defined. ΔKRPG is adopted as the parameter for the fatigue life estimation by FLARP. The validity of the fatigue life estimation by FLARP is confirmed by comparing the estimated S-N curves with the experimental results for the in-plane gusset welded joints.

Improvement of Pipeline Fatigue Life Estimation

2016 ◽  
Author(s):  
Sanjay Tiku ◽  
Aaron Dinovitzer ◽  
Vlad Semiga ◽  
Mark Piazza ◽  
Tom Jones
Keyword(s):  
Numerical Simulation ◽  
Growth Rate ◽  
Fatigue Crack ◽  
Fatigue Life ◽  
Crack Growth Rate ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Fatigue Crack Growth Rate ◽  
Life Estimation ◽  
Fatigue Life Estimation

Fracture mechanics methodologies for calculating fatigue lives have been successfully applied by pipeline operators to estimate integrity reassessment intervals. Their application in the definition of pipeline system fatigue lives has been overly conservative in actual practice. The source and magnitude of the conservatism inherent in the calculated fatigue life estimates needs to be identified so operators have a better indicator of when reassessments should take place. The pipe life estimation is especially critical for Electric Resistance Weld (ERW) and Electric Flash Weld (EFW) pipeline systems with longitudinally oriented defects. Prior work on improving fatigue life was initiated through studies completed by Pipeline Research Council International, Inc. (PRCI) to evaluate the sources of differences between fatigue life estimates produced by industry fatigue analysis software and different metallurgists. Two significant sources of conservatism in the fatigue life estimation process were identified: the fatigue crack growth rate (da/dN) and the bulging correction factor applied to axial surface flaws. The experimental and numerical simulation techniques considering the impact of these factors on rate of fatigue crack growth of pipeline axially oriented defects are described in this paper. Finite element modeling was used to simulate pipe bulging in the presence of axial flaws. The effect of the pipe thickness, diameter and flaw geometry was compared with treatments included in existing defect assessment standards. The results illustrate that for longer and deeper flaws existing treatments over represent the local bending due to pipe wall bulging. This results in unnecessarily conservative (shorter) fatigue life estimates. The crack growth rate (da/dN) was measured in a compact tension specimen material fatigue testing program. The test results included a range of ERW and EFW pipe materials with varying vintages and grades. The measured fatigue crack growth rate for the materials tested was found to be lower than that recommended by existing industry standards. This adds to the over conservatism of current approaches. The numerical simulation and materials testing results and related recommendations presented in this paper are compared to existing codified treatments to quantify the level of conservatism inherent in the current state of practice. Recommendations are provided to enhance the precision and better manage conservatism in fatigue crack growth rate calculations. Increased accuracy serves to improve integrity management and would be of interest to pipeline operators, consultants and regulators.

A Probabilistic Micromechanical Code for Predicting Fatigue Life Variability: Model Development and Application

2005 ◽  
Author(s):  
K. S. Chan ◽  
M. P. Enright
Keyword(s):  
Fatigue Crack ◽  
Fatigue Life ◽  
Fatigue Crack Growth ◽  
Crack Initiation ◽  
Crack Growth ◽  
Model Development ◽  
Fatigue Crack Initiation ◽  
Crack Size ◽  
Crack Initiation Life ◽  
Variability Model

This paper summarizes the development of a probabilistic micromechanical code for treating fatigue life variability resulting from material variations. Dubbed MicroFaVa (Micromechanical Fatigue Variability), the code is based on a set of physics-based fatigue models that predict fatigue crack initiation life, fatigue crack growth life, fatigue limit, fatigue crack growth threshold, crack size at initiation, and fracture toughness. Using microstructure information as material input, the code is capable of predicting the average behavior and the confidence limits of the crack initiation and crack growth lives of structural alloys under LCF or HCF loading. This paper presents a summary of the development of the code and highlights applications of the model to predicting the effects of microstructure on the fatigue crack growth response and life variability of the α + β Ti-alloy Ti-6Al-4V.

Sign in / Sign up

Export Citation Format

Share Document