Impact response of nanoparticle reinforced 3D woven spacer/epoxy composites at cryogenic temperatures

2021 ◽  
pp. 002199832110370
Author(s):  
Ferhat Yıldırım ◽  
Ahmet Caner Tatar ◽  
Volkan Eskizeybek ◽  
Ahmet Avcı ◽  
Mustafa Aydın
Keyword(s):  
Composite Structures ◽  
Impact Resistance ◽  
Low Velocity Impact ◽  
Woven Composites ◽  
Cryogenic Temperatures ◽  
Low Velocity ◽  
Impact Performance ◽  
Fiber Reinforced Polymer Composites ◽  
3D Woven Composites ◽  
The Impact

Fiber-reinforced polymer composites serving in harsh conditions must maintain their performance during their entire service. The cryogenic impact is one of the most unpredictable loading types, leading to catastrophic failures of composite structures. This study aims to examine the low-velocity impact (LVI) performance of 3D woven spacer glass-epoxy composite experimentally under cryogenic temperatures. LVI tests were conducted under various temperatures ranging from room temperature (RT) to −196°C. Experimental results reveal that the 3D composites gradually absorbed higher impact energies with decreasing temperature. Besides, the effect of multi-walled carbon nanotube and SiO2 nanofiller reinforcements of the matrix on the impact performance and the damage characteristics were further assessed. Nanofiller modification enhanced the impact resistance up to 30%, especially at RT. However, the nanofiller efficiency declined with decreasing temperature. The apparent damages were visually examined by scanning electron microscopy to address the damage formation. Significant outcomes have been achieved with the nanofiller modification regarding the new usage areas of 3D woven composites.

Influence of Structure Unit and the Distribution on the Low-Velocity Impact Property of the 3D Woven Composites

2012 ◽  
Vol 502 ◽  
pp. 169-173
Author(s):  
Yan Qing Li ◽  
Jia Ying Sun ◽  
Wei Tian ◽  
Cheng Yan Zhu
Keyword(s):  
Impact Resistance ◽  
Impact Property ◽  
Low Velocity Impact ◽  
Woven Composites ◽  
Material Structure ◽  
Absorbed Energy ◽  
Low Velocity ◽  
Velocity Impact ◽  
3D Woven Composites ◽  
The Impact

In this paper, the low-velocity impact properties of the 3D woven composites were tested. Through the study on the relationship of absorbed energy and material structure, the impact resistance of the composites has been discussed. The research results show that the low-velocity impact resistance of quasi-orthogonal composites is the best, the low-velocity impact resistance of orthogonal composites is the worst and angle tangled of interlayer joint composites stand somewhere between the two. Adding quasi-orthogonal unit into the structure, the low-velocity impact property of the composites can be enhanced efficiently. On the other hand, if the unit distribution of the enforced fabric is changed, the break time and break point will be changed. But the effect on the total absorbed energy is not obvious.

scholarly journals Improved impact response of hygrothermally conditioned carbon/epoxy woven composites

2016 ◽  
Vol 23 (6) ◽  
pp. 699-710 ◽  
Author(s):  
Yucheng Zhong ◽  
Sunil Chandrakant Joshi
Keyword(s):  
Carbon Fiber ◽  
Impact Resistance ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Elastic Response ◽  
Woven Composites ◽  
Low Velocity ◽  
Hygrothermal Conditioning ◽  
The Impact ◽  
Carbon Fiber Epoxy

AbstractThe effects of hygrothermal conditioning and moisture on the impact resistance of carbon fiber/epoxy composite laminates were investigated. Specimens were fabricated from carbon fiber/epoxy woven prepreg materials. The fabricated specimens were either immersed in water at 80°C or subjected to hot/wet (at 80°C in water for 12 h) to cold/dry (at -30°C in a freezer for 12 h) cyclic hygrothermal conditions, which resulted in different moisture contents inside the laminates. It was found that the absorbed moisture did not migrate out from composite materials at -30°C. Neither of the hygrothermal conditions in this study had detrimental effects on the microstructure of the laminates. Low-velocity impact testing was subsequently conducted on the conditioned specimens. When attacked by the same level of impact energy, laminates with different moisture levels experienced different levels of impact damage. Moisture significantly alleviated the extent of damage in carbon fiber/epoxy woven laminates. The elastic response of the laminate under impact was improved after hygrothermal conditioning. The mechanism behind the improved impact resistance after absorbing moisture was proposed and deliberated.

Improvement of Biocomposite Performance under Low-Velocity Impact Test - A Review

2021 ◽  
Vol 893 ◽  
pp. 67-74
Author(s):  
Usha Kiran Sanivada ◽  
Gonzalo Mármol ◽  
Francisco P. Brito ◽  
Raul Fangueiro
Keyword(s):  
Composite Structures ◽  
Impact Test ◽  
Impact Resistance ◽  
Vital Role ◽  
Low Velocity Impact ◽  
Efficient Design ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Tests ◽  
The Impact

The study of the impact energy and the composite behaviour plays a vital role in the efficient design of composite structures. Among the various categories of impact tests, it is essential to study low-velocity impact tests as the damage generated due to these loads is often not visible to the naked eye. The internal damages can reduce the strength of the composites and hence the impact behaviour must be addressed specifically for improving their applications in the transport industry. The main aim of this paper is to provide a comprehensive review of the work focusing on the assessment of biocomposites performance under low impact velocity, the different deformations, and damage mechanisms, as well the methods to improve the impact resistance.

scholarly journals Effect of Uniaxial Fatigue Aging and Fabric Orientation on Low Impact Velocity Response of Glass Fibers/Elium Acrylic Composite Laminates

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4089
Author(s):  
Tomasz Libura ◽  
Rodrigue Matadi Boumbimba ◽  
Alexis Rusinek ◽  
Zbigniew L. Kowalewski ◽  
Tadeusz Szymczak ◽  
...  
Keyword(s):  
Impact Velocity ◽  
Impact Energy ◽  
Composite Structures ◽  
Glass Fibers ◽  
Impact Resistance ◽  
Woven Fabric ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Engineering Structures ◽  
The Impact

Impact resistance is one of the most critical features of composite structures, and therefore, its examination for a new material has a fundamental importance. This paper is devoted to the characterization of the fully recyclable thermoplastic ELIUM acrylic resin reinforced by glass fabric woven, which belongs to a new category of materials requiring advanced testing before their application in responsible elements of engineering structures. Its high strength, low weight as well as low production cost give excellent opportunities for its wide application in the automotive industry as a replacement of the thermoset-based laminates. The study presents an experimental work concerning the effect of damage due to low and high cyclic fatigue aging of two groups of specimens, first with the woven fabric orientations of [0°/90°]4 and secondly with [45°/45°]4, on the low impact velocity properties. The impact resistance was measured in terms of load peak, absorbed energy, penetration threshold and damage analysis. The low velocity impact results indicate that the uniaxial cyclic loading (fatigue aging) of the material leads to the reduction of impact resistance, especially at the high impact energy levels. Scanning Electron Microscopy (SEM) and Computed Tomography (CT) scan observations reveal that the damage area grows with the increase of both strain amplitude and impact energy.

Low Velocity Impact Resistance of CPVC Pipes Exposed to Natural Outdoor Weathering Conditions

2012 ◽  
Vol 445 ◽  
pp. 959-964
Author(s):  
Z. Khan ◽  
Necar Merah ◽  
A. Bazoune ◽  
S. Furquan
Keyword(s):  
Impact Resistance ◽  
Outdoor Exposure ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Pipe Material ◽  
Low Velocity ◽  
Impact Energies ◽  
The Impact ◽  
Impact Events ◽  
Outdoor Weathering

Low velocity drop weight impact testing of CPVC pipes was conducted on 160 mm long pipe sections obtained from 4-inch (100 mm) diameter schedule 80 pipes. Impact test were carried out for the base (as received) pipes and after their exposure to out door natural weathering conditions in Dhahran, Saudi Arabia. The results of the impact testing on the natural (outdoor exposure) broadly suggest that the natural outdoor exposures produce no change in the impact resistance of CPVC pipe material for the impact events carrying low incident energies of 10 and 20J. At the impact energies of 35 and 50J the natural outdoor exposures appear to cause appreciable degradation in the impact resistance of the CPVC pipe material. This degradation is noted only for the longer exposure periods of 12 and 18 months.

scholarly journals Effect of Thermal Ageing on the Impact Damage Resistance and Tolerance of Carbon-Fibre-Reinforced Epoxy Laminates

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 160 ◽  
Author(s):  
Irene García-Moreno ◽  
Miguel Caminero ◽  
Gloria Rodríguez ◽  
Juan López-Cela
Keyword(s):  
Carbon Fibre ◽  
Residual Strength ◽  
Composite Structures ◽  
Impact Resistance ◽  
Thermal Ageing ◽  
Low Velocity Impact ◽  
Impact Tests ◽  
Compression After Impact ◽  
Structural Applications ◽  
The Impact

Composite structures are particularly vulnerable to impact, which drastically reduces their residual strength, in particular, at high temperatures. The glass-transition temperature (Tg) of a polymer is a critical factor that can modify the mechanical properties of the material, affecting its density, hardness and rigidity. In this work, the influence of thermal ageing on the low-velocity impact resistance and tolerance of composites is investigated by means of compression after impact (CAI) tests. Carbon-fibre-reinforced polymer (CFRP) laminates with a Tg of 195 °C were manufactured and subjected to thermal ageing treatments at 190 and 210 °C for 10 and 20 days. Drop-weight impact tests were carried out to determine the impact response of the different composite laminates. Compression after impact tests were performed in a non-standard CAI device in order to obtain the compression residual strength. Ultrasonic C-scanning of impacted samples were examined to assess the failure mechanisms of the different configurations as a function of temperature. It was observed that damage tolerance decreases as temperature increases. Nevertheless, a post-curing process was found at temperatures below the Tg that enhances the adhesion between matrix and fibres and improves the impact resistance. Finally, the results obtained demonstrate that temperature can cause significant changes to the impact behaviour of composites and must be taken to account when designing for structural applications.

Low-velocity impact properties and finite element analysis of syntactic foam reinforced by warp-knitted spacer fabric

2016 ◽  
Vol 87 (16) ◽  
pp. 1938-1952 ◽  
Author(s):  
Chao Zhi ◽  
Hairu Long ◽  
Fengxin Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Syntactic Foam ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Element Analysis ◽  
Velocity Impact ◽  
Impact Performance ◽  
Spacer Fabric ◽  
The Impact

The aim of this research was to investigate the low-velocity impact properties of syntactic foam reinforced by warp-knitted spacer fabric (SF-WKSF). In order to discuss the effect of warp-knitted spacer fabric (WKSF) and hollow glass microballoon parameters on the impact performance of composites, eight different kinds of SF-WKSF samples were fabricated, including different WKSF surface layer structures, different spacer yarn diameters and inclination-angles, different microballoon types and contents. The low-velocity impact tests were carried out on an INSTRON 9250 HV drop-weight impact tester and the impact resistances of SF-WKSF were analyzed; it is indicated that most SF-WKSF specimens show higher peak impact force and major damage energy compared to neat syntactic foam. The results also demonstrate that the surface layer structure, inclination-angle of the spacer yarn and the volume fraction and type of microballoon have a significant influence on the low-impact performance of SF-WKSF. In addition, a finite element analysis finished with ANSYS/LS-DYNA and LS-PrePost was used to simulate the impact behaviors of SF-WKSF. The results of the finite element analysis are in agreement with the experimental results.

scholarly journals Enhanced Impact-Resistance of Aeronautical Quasi-Isotropic Composite Plates Through Diffused Water Molecules in Epoxy

2020 ◽  
Author(s):  
Furqan Ahmad ◽  
Fethi Abbassi ◽  
Mazhar Ul-Islam ◽  
Frédéric JACQUEMIN ◽  
Jung-Wuk Hong
Keyword(s):  
Carbon Fiber ◽  
Impact Resistance ◽  
Composite Plates ◽  
Hot Water ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Segmental Mobility ◽  
Impact Tests ◽  
Isotropic Composite ◽  
The Impact

Abstract In order to elucidate the hygroscopic effects on impact-resistance of carbon fiber/epoxy quasi-isotropic composite plates, low-velocity impact tests are conducted on dry and hygroscopically conditioned plates, respectively, under identical configurations. For the impact tests, plates were immersed in the hot water at 80 °C to absorb a different amount of moisture content (MC). Experimental results reveal that the presence of the MC plays a pivotal role by improving the impact-resistance of composite plates. Plates with higher percentage of MC could behave elastically to a larger strain, yielding larger deflection under impact loading. From SEM fractographies, it is observed that small disbanding grows at the interface of epoxy and carbon fiber due to absorbed MC. After absorbing MC, most of impact enegy is dissipated in hygroscopic conditioned composite plates throught elastic deformation and overall less damage is induced in wet composite plates compare to the dry plate. We can postulate that the presence of MC increases the elastic limit as well as ductility of the epoxy by promoting chain segmental mobility of the polymer molecules, which eventually leads to the enhancement of the impact-resistance of wet quasi-isotropic composite plates in comparison with the dry plate.

scholarly journals Low Velocity Impact Assessment Of Flax And Kevlar-Flax Fibre Reinforced Polymer Laminates Using Experimental and Numerical Methods

2021 ◽  
Author(s):  
Benedict Lawrence Sy
Keyword(s):  
Impact Toughness ◽  
Composite Laminates ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Performance ◽  
Fibre Reinforced Polymer ◽  
The Cross ◽  
The Impact ◽  
Polymer Laminates

Flax/epoxy composite laminates were tested under low velocity impact loading, using passive Infra-Red thermography to monitor the damage evolution during the impact event. Two configurations were tested: unidirectional ([08F]S) and cross-ply ([(0/90)4F]S). The unidirectional laminate exhibited poor and brittle impact response. Conversely, the cross-ply laminate showed better impact performance with its energy penetration threshold three times higher than the unidirectional. Its impact toughness was also 2.5 times higher. Additional tests were conducted to evaluate the effect of hybridization with Kevlar®49. Test results showed significant improvement on the impact performance of the unidirectional flax/epoxy laminate. Hybridization increased its energy penetration threshold three times and impact toughness five times. Conversely, it reduced the penetration threshold of the cross-ply flax/epoxy laminate by 10%; however, it more than doubled the impact toughness. The impact toughness the Kevlar-Flax/epoxy laminates were slightly higher than those of aluminum and CFRP’s, making them sustainable alternatives for impact applications.

scholarly journals Effect of Fibres on the Failure Mechanism of Composite Tubes under Low-Velocity Impact

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4143
Author(s):  
Jie Xiao ◽  
Han Shi ◽  
Lei Tao ◽  
Liangliang Qi ◽  
Wei Min ◽  
...  
Keyword(s):  
Failure Mechanism ◽  
Impact Resistance ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Basalt Fibre ◽  
Composite Tubes ◽  
Velocity Impact ◽  
Fibre Breakage ◽  
Reinforced Composite ◽  
The Impact

Filament-wound composite tubular structures are frequently used in transmission systems, pressure vessels, and sports equipment. In this study, the failure mechanism of composite tubes reinforced with different fibres under low-velocity impact (LVI) and the radial residual compression performance of the impacted composite tubes were investigated. Four fibres, including carbon fiber-T800, carbon fiber-T700, basalt fibre, and glass fibre, were used to fabricate the composite tubes by the winding process. The internal matrix/fibre interface of the composite tubes before the LVI and their failure mechanism after the LVI were investigated by scanning electric microscopy and X-ray micro-computed tomography, respectively. The results showed that the composite tubes mainly fractured through the delamination and fibre breakage damage under the impact of 15 J energy. Delamination and localized fibre breakage occur in the glass fibre-reinforced composite (GFRP) and basalt fibre-reinforced composite (BFRP) tubes when subjected to LVI. While fibre breakage damage occurs globally in the carbon fibre-reinforced composite (CFRP) tubes. The GFRP tube showed the best impact resistance among all the tubes investigated. The basalt fibre-reinforced composite (BFRP) tube exhibited the lowest structural impact resistance. The impact resistance of the CFRP-T700 and CFRP-T800 tube differed slightly. The radial residual compression strength (R-RCS) of the BFRP tube is not sensitive to the impact, while that of the GFRP tube is shown to be highly sensitive to the impact.

Sign in / Sign up

Export Citation Format

Share Document