Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar

2016 ◽  
Vol 51 (1) ◽  
pp. 81-94 ◽  
Author(s):  
Khubab Shaker ◽  
Abdul Jabbar ◽  
Mehmet Karahan ◽  
Nevin Karahan ◽  
Yasir Nawab
Keyword(s):  
Molecular Weight ◽  
Strain Rate ◽  
Energy Absorption ◽  
Split Hopkinson Pressure Bar ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Hopkinson Pressure Bar ◽  
Ultrahigh Molecular Weight ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Polyethylene Composites

In this paper, high strain rate compression properties of aramid and ultrahigh molecular weight polyethylene composites in the out-of-plane direction are tested at room temperature on a Split Hopkinson Pressure Bar apparatus. Tests were conducted on composites reinforced with woven or Uni-Directional (UD) fabrics made from aramid or ultrahigh molecular weight polyethylene as well as on composites reinforced with hybrid reinforcement. The strain rate is varied in the tests by changing the projectile shooting pressure. Four different pressures 2, 4, 6 and 8 bar were selected to change the strain rate. Stress–strain and energy absorption behaviour of eight type of samples were noted. Hybrid samples showed better performance in the energy absorption compared with other samples.

scholarly journals High strain-rate dynamic compressive behavior and energy absorption of distiller’s dried grains and soluble composites with paulownia and pine wood using a split Hopkinson pressure bar technique

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 9444-9461
Author(s):  
Damian Stoddard ◽  
Suman Babu Ukyam ◽  
Brent Tisserat ◽  
Ivy Turner ◽  
Rowan Baird ◽  
...  
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
Energy Absorption ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Rate Sensitivity ◽  
Hopkinson Pressure Bar ◽  
Split Hopkinson ◽  
Pressure Bar

Novel bio-based composite wood panels (CWPs) that consisted of distiller’s dried grains and solubles (DDGS) flour adhesive bound to a wood filler/reinforcement were subjected to high strain-rate compression loading, and their behavior was investigated. Specimens of DDGS-Paulownia wood (PW) or DDGS-pinewood (Pine) composites made using DDGS with fractions of 10%, 15%, 25%, and 50% were tested at high strain-rates using a modified compression Split Hopkinson Pressure Bar (SHPB). Both DDGS-PW and DDGS-Pine composites displayed strain-rate sensitivity, and DDGS-PW had a 25% fraction, which showed the highest ultimate compressive strength of 655 MPa at approximately 1600/s. The 90%-PW had the highest specific energy of 19.24 kJ/kg at approximately 1600/s when loaded via dynamic compression. The CWPs constructed of DDGS-PW had higher strength and energy absorption than DDGS-Pine with the exception of the 50% DDGS composites.

Dynamic Behaviors of near β-Type Ti-5Al-5Mo-5V-3Cr Titanium Alloys under High Strain Rate

2015 ◽  
Vol 816 ◽  
pp. 795-803
Author(s):  
Yan Ling Wang ◽  
Song Xiao Hui ◽  
Wen Jun Ye ◽  
Rui Liu
Keyword(s):  
Strain Rate ◽  
Titanium Alloys ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Failure Behavior ◽  
Hopkinson Pressure Bar ◽  
Fracture Failure ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Dynamic Loading Conditions

The mechanical properties and fracture failure behavior of the near β-type Ti-5Al-5Mo-5V-3Cr-X (X = 1Fe or 1Zr) titanium alloys were studied by Split Hopkinson Pressure Bar (SHPB) experiment under the dynamic loading conditions at a strain rate of 1.5 × 103 s-1–5.0 × 103 s-1. Results showed that the SHPB specimen fractured in the direction of maximum shearing stress at an angle of 45° with the compression axis. The fracture surface revealed the shear and tension zones with cleavage steps and parabolic dimples. Severe early unloading was observed on the Ti-5553 alloy under a strain rate of 4,900 s-1 loading condition, and the dynamic property of the Ti-55531Zr alloy was proved to be the optimal.

Dynamic Hardness of MCrAlY Abradable Seal Coating

2021 ◽  
Vol 1035 ◽  
pp. 591-595
Author(s):  
Dan Guo ◽  
Jian Ming Liu ◽  
De Ming Zhang ◽  
Xin Zhang ◽  
Tong Liu
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Hopkinson Pressure Bar ◽  
Dynamic Hardness ◽  
Mcraly Coating ◽  
Static Hardness ◽  
Split Hopkinson ◽  
The Difference ◽  
Pressure Bar ◽  
Abradable Coatings

The purpose of this investigation is to study the dynamic hardness of MCrAlY abradable coatings under different strain rates. A dynamic indentation device based on the split Hopkinson pressure bar system (SHPB) was used. The results show that the hardness of MCrAlY coating increased with the increase of the strain rate, which has a positive strain rate effect. In addition, the difference of the static hardness of MCrAlY coating prepared by HVOF and LPPS was only 4%, while the difference in dynamic hardness was 16%.

scholarly journals Study on the dynamic properties of AM-SLM AlSi10Mg alloy using the Split Hopkinson Pressure Bar (SHPB) technique

2018 ◽  
Vol 183 ◽  
pp. 04005 ◽  
Author(s):  
Bar Nurel ◽  
Moshe Nahmany ◽  
Adin Stern ◽  
Nahum Frage ◽  
Oren Sadot
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Properties ◽  
Rate Sensitivity ◽  
Strain Rate Range ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Static Mechanical ◽  
Split Hopkinson ◽  
Pressure Bar

Additive manufacturing by Selective Laser Melting of metals is attracting substantial attention, due to its advantages, such as short-time production of customized structures. This technique is useful for building complex components using a metallic pre-alloyed powder. One of the most used materials in AMSLM is AlSi10Mg powder. Additively manufactured AlSi10Mg may be used as a structural material and it static mechanical properties were widely investigated. Properties in the strain rates of 5×102–1.6×103 s-1 and at higher strain rates of 5×103 –105 s-1 have been also reported. The aim of this study is investigation of dynamic properties in the 7×102–8×103 s-1 strain rate range, using the split Hopkinson pressure bar technique. It was found that the dynamic properties at strain-rates of 1×103–3×103 s-1 depend on a build direction and affected by heat treatment. At higher and lower strain-rates the effect of build direction is limited. The anisotropic nature of the material was determined by the ellipticity of samples after the SHPB test. No strain rate sensitivity was observed.

Correlation of Dynamic Response with Adiabatic Shearing Behavior in Ti–10V–2Fe–3Al Alloy

2011 ◽  
Vol 284-286 ◽  
pp. 1542-1545 ◽  
Author(s):  
Qing Wen Ding ◽  
Yu Ren ◽  
Cheng Wen Tan ◽  
Jing Zhang ◽  
Xiao Dong Yu
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Shear Bands ◽  
Lamellar Microstructure ◽  
Hopkinson Pressure Bar ◽  
Adiabatic Shearing ◽  
Critical Strain Rate ◽  
Microstructure Examination ◽  
Split Hopkinson ◽  
Pressure Bar

A Split Hopkinson Pressure Bar system was employed to investigate the compressive dynamic mechanical behaviors of Ti-10V-2Fe-3Al (Ti-1023) alloy with lamellar microstructure, over a broad strain rates ranging from 1500/s to 5100/s. The results reveal that the strain rate has a significant effect on the flow stress of Ti-1023 alloy, and there exists serious thermal softening as the strain rate exceeds 3200/s. The critical strain rate of fracture for this alloy is 2300/s. The microstructure examination indicated that adiabatic shear bands (ASBs) bifurcate more intensely with the increasing of strain rate. Micro-voids nucleate either in the ASB or interface between shear band and matrix bulk. Finally, fracture of this alloy proceeds through the nucleation, growth and coalescence of these voids and cracks along the ASBs.

Effects of Temperature and Strain-Rate on the Compressive Strength of Concrete

2010 ◽  
Vol 168-170 ◽  
pp. 2619-2624
Author(s):  
Chuan Xiong Liu ◽  
Yu Long Li
Keyword(s):  
Compressive Strength ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Peak Strain ◽  
Hopkinson Pressure Bar ◽  
Split Hopkinson ◽  
Compressive Strength Of Concrete ◽  
Pressure Bar ◽  
Increasing Temperature ◽  
Compressive Tests

Dynamic compressive tests were carried out for concrete specimens after exposure to temperatures 23°C, 400°C, 600°C and 800°C by using Split Hopkinson Pressure Bar(SHPB) apparatus. Cylindrical specimens with 98mm in diameter and 49mm in length were used in tests. The strain rates achieved in tests ranged from 30s-1 to 220s-1. The results showed that the compressive strength increases with increasing strain-rate, but decreases with the increase of temperature. However, the effect of strain-rate on improving the compressive strength of concrete decreases with the increase of temperature. Moreover, the strain-rate has an improvement on the peak strain of concrete, and the accretion rate increases with increasing temperature.

Sign in / Sign up

Export Citation Format

Share Document