scholarly journals Large-Scale Atmospheric Forcing by Southeast Pacific Boundary Layer Clouds: A Regional Model Study*

2005 ◽  
Vol 18 (7) ◽  
pp. 934-951 ◽  
Author(s):  
Yuqing Wang ◽  
Shang-Ping Xie ◽  
Bin Wang ◽  
Haiming Xu
Keyword(s):  
Boundary Layer ◽  
Large Scale ◽  
Inversion Layer ◽  
Regional Model ◽  
Cloud Layer ◽  
Eastern Pacific ◽  
Radiative Effect ◽  
Boundary Layer Clouds ◽  
Southeast Pacific ◽  
Stratocumulus Clouds

Abstract A regional model is used to study the radiative effect of boundary layer clouds over the southeast Pacific on large-scale atmosphere circulation during August–October 1999. With the standard settings, the model simulates reasonably well the large-scale circulation over the eastern Pacific, precipitation in the intertropical convergence zone (ITCZ) north of the equator, and marine boundary layer stratocumulus clouds to the south. In a sensitivity experiment with the radiative effect of liquid clouds south of the equator over the eastern Pacific artificially removed, boundary layer clouds south of the equator almost disappear and precipitation in the ITCZ is reduced by 15%–20%, indicating that the stratocumulus clouds over the southeast Pacific have both local and cross-equatorial effects. Examination of the differences between the control and sensitivity experiments indicates that clouds exert a net diabatic cooling in the inversion layer. In response to this cloud-induced cooling, an in situ anomalous high pressure system develops in the boundary layer and an anomalous shallow meridional circulation develops in the lower troposphere over the equatorial eastern Pacific. At the lower branch of this shallow circulation, anomalous boundary layer southerlies blow from the boundary layer high toward the northern ITCZ where the air ascends. An anomalous returning flow (northerly) just above the cloud layer closes the shallow circulation. This low-level anomalous shallow circulation enhances the subsidence over the southeast Pacific above the cloud layer, helping to maintain boundary layer clouds and temperature inversion there. Meanwhile, the strengthened cross-equatorial flow near the surface enhances moisture convergence and convection in the ITCZ north of the equator. This in turn strengthens the local, deep Hadley circulation and hence the large-scale subsidence and boundary layer clouds over the southeast Pacific. This positive feedback therefore enhances the interhemispheric climate asymmetry over the tropical eastern Pacific.

scholarly journals Coherent Structures in the Boundary and Cloud Layers: Role of Updrafts, Subsiding Shells, and Environmental Subsidence

2016 ◽  
Vol 73 (4) ◽  
pp. 1789-1814 ◽  
Author(s):  
Seung-Bu Park ◽  
Pierre Gentine ◽  
Kai Schneider ◽  
Marie Farge
Keyword(s):  
Boundary Layer ◽  
Gravity Waves ◽  
Coherent Structures ◽  
Large Scale ◽  
Inversion Layer ◽  
Cloud Layer ◽  
Small Scale ◽  
Shallow Convection ◽  
Systematic Analysis ◽  
Heat And Moisture

Abstract Coherent structures, such as updrafts, downdrafts/shells, and environmental subsidence in the boundary and cloud layers of shallow convection, are investigated using a new classification method. Using large-eddy simulation data, the new method first filters out background turbulence and small-scale gravity waves from the coherent part of the flow, composed of turbulent coherent structures and large-scale transporting gravity waves. Then the algorithm divides this coherent flow into “updrafts,” “downdrafts/shells,” “subsidence,” “ascendance,” and four other flow structures using an octant analysis. The novel method can systematically track structures from the cloud-free boundary layer to the cloud layer, thus allowing systematic analysis of the fate of updrafts and downdrafts. The frequency and contribution of the coherent structures to the vertical mass flux and transport of heat and moisture can then be investigated for the first time. Updrafts, subsidence, and downdrafts/subsiding shells—to a lesser extent—are shown to be the most frequent and dominant contributors to the vertical transport of heat and moisture in the boundary layer. Contrary to previous perspective, environmental subsidence transport is shown to be weak in the cloud layer. Instead, downdrafts/shells are the main downward transport contributors, especially in the trade inversion layer. The newly developed method in this study can be used to better evaluate the entrainment and detrainment of individual—or an ensemble of—coherent structures from the unsaturated boundary layer to the cloud layer.

scholarly journals Regional Model Simulations of Marine Boundary Layer Clouds over the Southeast Pacific off South America. Part II: Sensitivity Experiments*

2004 ◽  
Vol 132 (11) ◽  
pp. 2650-2668 ◽  
Author(s):  
Yuqing Wang ◽  
Haiming Xu ◽  
Shang-Ping Xie
Keyword(s):  
Boundary Layer ◽  
South America ◽  
Marine Boundary Layer ◽  
Layer Structure ◽  
Temperature Inversion ◽  
Cloud Layer ◽  
Boundary Layer Structure ◽  
Boundary Layer Clouds ◽  
Shallow Cumulus ◽  
Southeast Pacific

Abstract The sensitivity of a regional climate model to physical parameterizations and model resolution is investigated in terms of its simulation of boundary layer stratocumulus (SCu) clouds over the southeast Pacific. Specifically, the physical schemes being tested include shallow cumulus convection, subgrid vertical mixing, cloud droplet number concentration (CDNC), and drizzle. As described in Part I, the model with standard settings captures the major features of the boundary layer in the region, including a well-mixed marine boundary layer, a capping temperature inversion, SCu clouds, and the boundary layer regime transition from the well-mixed layer near the coast of South America to a decoupled cloud layer over warmer water to the west. Turning off the shallow cumulus parameterization results in a dramatic increase in the simulated SCu clouds while the boundary layer structure becomes unrealistic, losing the decoupled regime over warm water. With reduced penetrative mixing at the top of shallow cumuli, the simulated SCu clouds are somewhat increased while the boundary layer structure remained largely unchanged. Reducing the CDNC increases the size of cloud droplets and reduces the cloud albedo but has little effect on the vertical structure of the boundary layer and clouds. Allowing more drizzle decreases boundary layer clouds considerably. It is also shown that the simulated depth of the boundary layer and its decoupling is highly sensitive to the model horizontal and vertical resolutions. Insufficient horizontal or vertical resolutions produce a temperature inversion and cloud layer too close to the sea surface, a typical problem for global general circulation models. Implications of these results for global and regional modeling of boundary layer clouds and the areas that need more attention in future model development are discussed.

scholarly journals Wind speed response of marine non-precipitating stratocumulus clouds over a diurnal cycle in cloud-system resolving simulations

2016 ◽  
Vol 16 (9) ◽  
pp. 5811-5839 ◽  
Author(s):  
Jan Kazil ◽  
Graham Feingold ◽  
Takanobu Yamaguchi
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Large Scale ◽  
Layer Growth ◽  
Radiative Properties ◽  
Cloud Base ◽  
Latent Heat Release ◽  
Marine Stratocumulus ◽  
Stratocumulus Clouds ◽  
Boundary Layer Growth

Abstract. Observed and projected trends in large-scale wind speed over the oceans prompt the question: how do marine stratocumulus clouds and their radiative properties respond to changes in large-scale wind speed? Wind speed drives the surface fluxes of sensible heat, moisture, and momentum and thereby acts on cloud liquid water path (LWP) and cloud radiative properties. We present an investigation of the dynamical response of non-precipitating, overcast marine stratocumulus clouds to different wind speeds over the course of a diurnal cycle, all else equal. In cloud-system resolving simulations, we find that higher wind speed leads to faster boundary layer growth and stronger entrainment. The dynamical driver is enhanced buoyant production of turbulence kinetic energy (TKE) from latent heat release in cloud updrafts. LWP is enhanced during the night and in the morning at higher wind speed, and more strongly suppressed later in the day. Wind speed hence accentuates the diurnal LWP cycle by expanding the morning–afternoon contrast. The higher LWP at higher wind speed does not, however, enhance cloud top cooling because in clouds with LWP ⪆ 50 g m−2, longwave emissions are insensitive to LWP. This leads to the general conclusion that in sufficiently thick stratocumulus clouds, additional boundary layer growth and entrainment due to a boundary layer moistening arises by stronger production of TKE from latent heat release in cloud updrafts, rather than from enhanced longwave cooling. We find that large-scale wind modulates boundary layer decoupling. At nighttime and at low wind speed during daytime, it enhances decoupling in part by faster boundary layer growth and stronger entrainment and in part because shear from large-scale wind in the sub-cloud layer hinders vertical moisture transport between the surface and cloud base. With increasing wind speed, however, in decoupled daytime conditions, shear-driven circulation due to large-scale wind takes over from buoyancy-driven circulation in transporting moisture from the surface to cloud base and thereby reduces decoupling and helps maintain LWP. The total (shortwave + longwave) cloud radiative effect (CRE) responds to changes in LWP and cloud fraction, and higher wind speed translates to a stronger diurnally averaged total CRE. However, the sensitivity of the diurnally averaged total CRE to wind speed decreases with increasing wind speed.

scholarly journals Cloud Processing of Aerosol Particles in Marine Stratocumulus Clouds

Atmosphere ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 520 ◽  
Author(s):  
Andrea I. Flossmann ◽  
Wolfram Wobrock
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Numerical Study ◽  
Spatial Scales ◽  
Aerosol Particles ◽  
Cloud Microphysics ◽  
Marine Stratocumulus ◽  
Boundary Layer Clouds ◽  
Cloud Processing ◽  
Stratocumulus Clouds

Cloud processing of aerosol particles is an important process and is, for example, thought to be responsible for the so-called “Hoppel-minimum” in the marine aerosol particle distribution or contribute to the cell organization of marine boundary layer clouds. A numerical study of the temporal and spatial scales of the processing of aerosol particles by typical marine stratocumulus clouds is presented. The dynamical framework is inspired by observations during the VOCALS (Variability of the American Monsoon System Ocean-Cloud-Atmosphere-Land Study) Regional Experiment in the Southeast Pacific. The 3-D mesoscale model version of DESCAM (Detailed Scavenging Model) follows cloud microphysics of the stratocumulus deck in a bin-resolved manner and has been extended to keep track of cloud-processed particles in addition to non-processed aerosol particles in the air and inside the cloud drops. The simulation follows the evolution of the processing of aerosol particles by the cloud. It is found that within one hour almost all boundary layer aerosol particles have passed through at least one cloud cycle. However, as the in-cloud residence times of the particles in the considered case are only on the order of minutes, the aerosol particles remain essentially unchanged. Our findings suggest that in order to produce noticeable microphysical and dynamical effects in the marine boundary layer clouds, cloud processing needs to continue for extended periods of time, exceeding largely the time period considered in the present study. A second model study is dedicated to the interaction of ship track particles with marine boundary layer clouds. The model simulates quite satisfactorily the incorporation of the ship plume particles into the cloud. The observed time and spatial scales and a possible Twomey effect were reproduced.

scholarly journals Quantifying pollution inflow and outflow over East Asia in spring with regional and global models

2010 ◽  
Vol 10 (9) ◽  
pp. 4221-4239 ◽  
Author(s):  
M. Lin ◽  
T. Holloway ◽  
G. R. Carmichael ◽  
A. M. Fiore
Keyword(s):  
Boundary Layer ◽  
Air Pollution ◽  
High Resolution ◽  
Boundary Conditions ◽  
East Asia ◽  
Large Scale ◽  
Regional Model ◽  
Global Model ◽  
Global Models ◽  
High Resolution Models

Abstract. Understanding the exchange processes between the atmospheric boundary layer and the free troposphere is crucial for estimating hemispheric transport of air pollution. Most studies of hemispheric air pollution transport have taken a large-scale perspective using global chemical transport models with fairly coarse spatial and temporal resolutions. In support of United Nations Task Force on Hemispheric Transport of Air Pollution (TF HTAP; www.htap.org), this study employs two high-resolution atmospheric chemistry models (WRF-Chem and CMAQ; 36×36 km) driven with chemical boundary conditions from a global model (MOZART; 1.9×1.9°) to examine the role of fine-scale transport and chemistry processes in controlling pollution export and import over the Asian continent in spring (March 2001). Our analysis indicates the importance of rapid venting through deep convection that develops along the leading edge of frontal system convergence bands, which are not adequately resolved in either of two global models compared with TRACE-P aircraft observations during a frontal event. Both regional model simulations and observations show that frontal outflows of CO, O3 and PAN can extend to the upper troposphere (6–9 km). Pollution plumes in the global MOZART model are typically diluted and insufficiently lofted to higher altitudes where they can undergo more efficient transport in stronger winds. We use sensitivity simulations that perturb chemical boundary conditions in the CMAQ regional model to estimate that the O3 production over East Asia (EA) driven by PAN decomposition contributes 20% of the spatial averaged total O3 response to European (EU) emission perturbations in March, and occasionally contributes approximately 50% of the total O3 response in subsiding plumes at mountain observatories (at approximately 2 km altitude). The response to decomposing PAN of EU origin is strongly affected by the O3 formation chemical regimes, which vary with the model chemical mechanism and NOx/VOC emissions. Our high-resolution models demonstrate a large spatial variability (by up to a factor of 6) in the response of local O3 to 20% reductions in EU anthropogenic O3 precursor emissions. The response in the highly populated Asian megacities is 40–50% lower in our high-resolution models than the global model, suggesting that the source-receptor relationships inferred from the global coarse-resolution models likely overestimate health impacts associated with intercontinental O3 transport. Our results highlight the important roles of rapid convective transport, orographic forcing, urban photochemistry and heterogeneous boundary layer processes in controlling intercontinental transport; these processes may not be well resolved in the large-scale models.

The Vertical Structure of Cloud Occurrence and Radiative Forcing at the SGP ARM Site as Revealed by 8 Years of Continuous Data

2008 ◽  
Vol 21 (11) ◽  
pp. 2591-2610 ◽  
Author(s):  
Gerald G. Mace ◽  
Sally Benson
Keyword(s):  
Boundary Layer ◽  
Annual Cycle ◽  
Radiative Forcing ◽  
Lower Troposphere ◽  
Middle Latitude ◽  
Radiation Budget ◽  
Continuous Data ◽  
Radiative Effect ◽  
Flux Divergence ◽  
Boundary Layer Clouds

Abstract Data collected at the Atmospheric Radiation Measurement (ARM) Program ground sites allow for the description of the atmospheric thermodynamic state, cloud occurrence, and cloud properties. This information allows for the derivation of estimates of the effects of clouds on the radiation budget of the surface and atmosphere. Herein 8 yr of continuous data collected at the ARM Southern Great Plains (SGP) Climate Research Facility (ACRF) are analyzed, and the influence of clouds on the radiative flux divergence of solar and infrared energy on annual, seasonal, and monthly time scales is documented. Given the uncertainties in derived cloud microphysical properties that result in calculated radiant flux errors, it is demonstrated that the ability to quantitatively resolve all but the largest heating and cooling influences by clouds is marginal for averaging periods less than 1 month. Concentrating on seasonal and monthly averages, it is found that the net column-integrated radiative effect of clouds on the atmosphere is nearly neutral at this middle-latitude location. However, a net heating of the upper troposphere by upper-tropospheric clouds and a cooling of the lower troposphere by boundary layer clouds is documented. The balance evolves over the course of an annual cycle as the troposphere deepens in summer and boundary layer clouds become less frequent relative to upper-tropospheric clouds. Although the top-of-atmosphere IR radiative effect is nearly invariant through the annual cycle, the seasonally varying heating profile is determined largely by the convergence of IR flux because solar heating is offset by IR cooling within the column.

Drizzle in Stratiform Boundary Layer Clouds. Part II: Microphysical Aspects

2005 ◽  
Vol 62 (9) ◽  
pp. 3034-3050 ◽  
Author(s):  
R. Wood
Keyword(s):  
Boundary Layer ◽  
Size Distribution ◽  
Large Scale ◽  
Cloud Droplet ◽  
Horizontal Structure ◽  
Boundary Layer Clouds ◽  
Droplet Concentration ◽  
Warm Rain ◽  
Lognormal Size Distribution ◽  
Accretion Rates

Abstract This is the second of two observational papers examining drizzle in stratiform boundary layer clouds. Part I details the vertical and horizontal structure of cloud and drizzle parameters, including some bulk microphysical variables. In this paper, the focus is on the in situ size-resolved microphysical measurements, particularly of drizzle drops (r > 20 μm). Layer-averaged size distributions of drizzle drops within cloud are shown to be well represented using either a truncated exponential or a truncated lognormal size distribution. The size-resolved microphysical measurements are used to estimate autoconversion and accretion rates by integration of the stochastic collection equation (SCE). These rates are compared with a number of commonly used bulk parameterizations of warm rain formation. While parameterized accretion rates agree well with those derived from the SCE initialized with observed spectra, the autoconversion rates seriously disagree in some cases. These disagreements need to be addressed in order to bolster confidence in large-scale numerical model predictions of the aerosol second indirect effect. Cloud droplet coalescence removal rates and mass and number fall rate relationships used in the bulk microphysical schemes are also compared, revealing some potentially important discrepancies. The relative roles of autoconversion and accretion are estimated by examination of composite profiles from the 12 flights. Autoconversion, although necessary for the production of drizzle drops, is much less important than accretion throughout the lower 80% of the cloud layer in terms of the production of drizzle liquid water. The SCE calculations indicate that the autoconversion rate depends strongly upon the cloud droplet concentration Nd such that a doubling of Nd would lead to a reduction in autoconversion rate of between 2 and 4. Radar reflectivity–precipitation rate (Z–R) relationships suitable for radar use are derived and are shown to be significantly biased in some cases by the undersampling of large (r > 200 μm) drops with the 2D-C probe. A correction based upon the extrapolation to larger sizes using the exponential size distribution changes the Z–R relationship, leading to the conclusion that consideration should be given to sampling issues when examining higher moments of the drop size distribution in drizzling stratiform boundary layer clouds.

scholarly journals Turbulence in The Marine Boundary Layer and Air Motions Below Stratocumulus Clouds at the ARM Eastern North Atlantic Site

2021 ◽  
Author(s):  
Virendra P. Ghate ◽  
Maria P. Cadeddu ◽  
Xue Zheng ◽  
Ewan O’Connor
Keyword(s):  
Boundary Layer ◽  
North Atlantic ◽  
Vertical Velocity ◽  
Marine Boundary Layer ◽  
Cloud Layer ◽  
Similar Amount ◽  
Marine Stratocumulus ◽  
Stratocumulus Clouds ◽  
Eastern North Atlantic ◽  
Rain Rates

AbstractMarine stratocumulus clouds are intimately coupled to the turbulence in the boundary layer and drizzle is known to be ubiquitous within them. Six years of data collected at the Atmospheric Radiation Measurement (ARM)’s Eastern North Atlantic site are utilized to characterize turbulence in the marine boundary layer and air motions below stratocumulus clouds. Profiles of variance of vertical velocity binned by wind direction (wdir) yielded that the boundary layer measurements are affected by the island when the wdir is between 90° and 310° (measured clockwise from North where air is coming from). Data collected during the marine conditions (wdir<90 or wdir>310) showed that the variance of vertical velocity was higher during the winter months than during the summer months due to higher cloudiness, wind speeds, and surface fluxes. During marine conditions the variance of vertical velocity and cloud fraction exhibited a distinct diurnal cycle with higher values during the nighttime than during the daytime. Detailed analysis of 32 cases of drizzling marine stratocumulus clouds showed that for a similar amount of radiative cooling at the cloud top, within the sub-cloud layer 1) drizzle increasingly falls within downdrafts with increasing rain rates, 2) the strength of the downdrafts increases with increasing rain rates, and 3) the correlation between vertical air motion and rain rate is highest in the middle of the sub-cloud layer. The results presented herein have implications for climatological and model evaluation studies conducted at the ENA site, along with efforts of accurately representing drizzle-turbulence interactions in a range of atmospheric models.

scholarly journals Precipitation and cloud cellular structures in marine stratocumulus over the southeast pacific: model simulations

2010 ◽  
Vol 10 (3) ◽  
pp. 8341-8378
Author(s):  
H. Wang ◽  
G. Feingold ◽  
R. Wood ◽  
J. Kazil
Keyword(s):  
Boundary Layer ◽  
Large Scale ◽  
Initial Conditions ◽  
Sensible Heat Flux ◽  
Cell Formation ◽  
Solar Heating ◽  
Cellular Structures ◽  
Open Cell ◽  
Model Simulations ◽  
Southeast Pacific

Abstract. Microphysical and meteorological controls on the formation of open and closed cellular structures in the Southeast Pacific are explored using model simulations based on aircraft observations during the VAMOS Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx). The effectiveness of factors such as boundary-layer moisture and temperature perturbations, surface heat and moisture fluxes, large-scale vertical motion and solar heating in promoting drizzle and open cell formation for prescribed aerosol number concentrations is explored. For the case considered, drizzle and subsequent open cell formation over a broad region are more sensitive to the observed boundary-layer moisture and temperature perturbations (=0.9 g kg−1; −1 K) than to a five-fold decrease in aerosol number concentrations (150 vs. 30 mg−1). When embedding the perturbations in closed cells, local drizzle and pockets of open cells (POCs) formation respond faster to the aerosol reduction than to the moisture increase, but the latter generate stronger and more persistent drizzle. The local negative perturbation in temperature drives a mesoscale circulation that prevents local drizzle formation but promotes it in a remote area where lower-level horizontal transport of moisture is blocked and converges to enhance liquid water path. This represents a potential mechanism for POC formation in the Southeast Pacific stratocumulus region whereby the circulation is triggered by strong precipitation in adjacent broad regions of open cells. A simulation that attempts to mimic the influence of a coastally induced upsidence wave results in an increase in cloud water but this alone is insufficient to initiate drizzle. An increase of surface sensible heat flux is also effective in triggering local drizzle and POC formation. Both open and closed cells simulated with observed initial conditions exhibit distinct diurnal variations in cloud properties. A stratocumulus deck that breaks up due solely to solar heating can recover at night. Precipitation in the open-cell cases depletes the aerosol to the extent that cloud formation is significantly suppressed within one diurnal cycle. A replenishment rate of cloud condensation nuclei of 0.72 mg−1 h−1 is sufficient to maintain clouds and prevent the boundary layer from collapsing the following day, suggesting that some local and/or remote aerosol sources are necessary for POCs to be able to last for days.

Sign in / Sign up

Export Citation Format

Share Document