scholarly journals Direct Observations of Along-Isopycnal Upwelling and Diapycnal Velocity at a Shelfbreak Front*

2004 ◽  
Vol 34 (3) ◽  
pp. 543-565 ◽  
Author(s):  
John A. Barth ◽  
Dave Hebert ◽  
Andrew C. Dale ◽  
David S. Ullman

Abstract By mapping the three-dimensional density field while simultaneously tracking a subsurface, isopycnal float, direct observations of upwelling along a shelfbreak front were made on the southern flank of Georges Bank. The thermohaline and bio-optical fields were mapped using a towed undulating vehicle, and horizontal velocity was measured with a shipboard acoustic Doppler current profiler. A subsurface isopycnal float capable of measuring diapycnal flow past the float was acoustically tracked from the ship. The float was released near the foot of the shelfbreak front (95–100-m isobath) and moved 15 km seaward as it rose from 80 to 50 m along the sloping frontal isopycnals over a 2-day deployment. The float's average westward velocity was 0.09 m s−1, while a drifter drogued at 15 m released at the same location moved westward essentially alongfront at 0.18 m s−1. The float measured strong downward vertical velocities (in excess of 0.02 m s−1) associated with propagation of internal tidal solibores in the onbank direction from their formation near the shelf break. The float measured large upward vertical velocities (in excess of 0.001 m s−1 ≃ 100 m day−1) as the pycnocline rebounded adiabatically after the passage of the internal tide solibore. The directly measured mean along-isopycnal vertical velocity was 17.5 m day−1. Intense mixing events lasting up to 2 hours were observed in the shelfbreak front at the boundary between cold, fresh shelf water and warm, salty slope water. Diapycnal velocities of up to 3 × 10−3 m s−1 were measured, implying a diapycnal thermal diffusivity as large as 10−2 m2 s−1, indicative of strong mixing events in this coastal front.

2012 ◽  
Vol 42 (6) ◽  
pp. 1039-1044 ◽  
Author(s):  
Andy Pickering ◽  
Matthew H. Alford

Abstract Observations are reported of the semidiurnal (M2) internal tide across Kaena Ridge, Hawaii. Horizontal velocity in the upper 1000–1500 m was measured during eleven ~240-km-long shipboard acoustic Doppler current profiler (ADCP) transects across the ridge, made over the course of several months. The M2 motions are isolated by means of harmonic analysis and compared to numerical simulations using the Princeton Ocean Model (POM). The depth coverage of the measurements is about 3 times greater than similar past studies, offering a substantially richer view of the internal tide beams. Sloping features are seen extending upward north and south from the ridge and then downward from the surface reflection about ±40 km from the ridge crest, closely matching theoretical M2 ray paths and the model predictions.


Ocean Science ◽  
2019 ◽  
Vol 15 (6) ◽  
pp. 1439-1453 ◽  
Author(s):  
Rob A. Hall ◽  
Barbara Berx ◽  
Gillian M. Damerell

Abstract. Internal tide energy flux is an important diagnostic for the study of energy pathways in the ocean, from large-scale input by the surface tide to small-scale dissipation by turbulent mixing. Accurate calculation of energy flux requires repeated full-depth measurements of both potential density (ρ) and horizontal current velocity (u) over at least a tidal cycle and over several weeks to resolve the internal spring–neap cycle. Typically, these observations are made using full-depth oceanographic moorings that are vulnerable to being “fished out” by commercial trawlers when deployed on continental shelves and slopes. Here we test an alternative approach to minimize these risks, with u measured by a low-frequency acoustic Doppler current profiler (ADCP) moored near the seabed and ρ measured by an autonomous ocean glider holding station by the ADCP. The method is used to measure the semidiurnal internal tide radiating from the Wyville Thomson Ridge in the North Atlantic. The observed energy flux (4.2±0.2 kW m−1) compares favourably with historic observations and a previous numerical model study. Error in the energy flux calculation due to imperfect co-location of the glider and ADCP is estimated by subsampling potential density in an idealized internal tide field along pseudorandomly distributed glider paths. The error is considered acceptable (<10 %) if all the glider data are contained within a “watch circle” with a diameter smaller than 1∕8 the mode-1 horizontal wavelength of the internal tide. Energy flux is biased low because the glider samples density with a broad range of phase shifts, resulting in underestimation of vertical isopycnal displacement and available potential energy. The negative bias increases with increasing watch circle diameter. If watch circle diameter is larger than 1∕8 the mode-1 horizontal wavelength, the negative bias is more than 3 % and all realizations within the 95 % confidence interval are underestimates. Over the Wyville Thomson Ridge, where the semidiurnal mode-1 horizontal wavelength is ≈100 km and all the glider dives are within a 5 km diameter watch circle, the observed energy flux is estimated to have a negative bias of only 0.4 % and an error of less than 3 % at the 95 % confidence limit. With typical glider performance, we expect energy flux error due to imperfect co-location to be <10 % in most mid-latitude shelf slope regions.


2010 ◽  
Vol 37 (10) ◽  
pp. 1289-1302 ◽  
Author(s):  
Cheng He

This study assesses the potential increase in the intake cooling water temperatures if both the local industrial intake water and outfall cooling waters are trapped in the same narrow long channel. A three-dimensional (3D) hydrodynamic model was used to quantitatively investigate water temperature structures in the channel. The model was verified in a previous hydrodynamic study at the same location using vertical current profiles measured by an acoustic Doppler current profiler (ADCP) and further verified in this study with the measured vertical temperature profile. Several scenarios were investigated under various wind and geometrical conditions. The simulated results revealed that because of the strong buoyant force induced by water temperature differences the trapped hot outfall water would not be directly retaken by the intake located about 70 m away from the outlet and 6 m below the surface. The thermal structure in the channel eventually reached an equilibrium stage due to additional fresh bay water and heat loss through various heat-transfer mechanisms from the air–water interface. The results of this modelling study can be extended to solve other similar environmental and civil engineering problems.


2017 ◽  
Author(s):  
Sergei Kirillov ◽  
Igor Dmitrenko ◽  
Søren Rysgaard ◽  
David Babb ◽  
Leif Toudal Pedersen ◽  
...  

Abstract. In April 2015, an ice-tethered conductivity-temperature-depth (CTD) profiler and a down-looking Acoustic Doppler Current Profiler (ADCP) were deployed from the landfast ice near the tidewater glacier terminus of the Flade Isblink Glacier in the Wandel Sea, NE Greenland. The three week timeseries showed that water dynamics and the thermohaline structure were modified considerably during a storm event on 22–24 April when northerly winds exceeded 15 m/s. The storm initiated downwelling-like water dynamics characterized by on-shore water transport in the surface (0–40 m) layer and compensating off-shore flow at intermediate depths. After the storm, currents reversed in both layers, and the relaxation phase of downwelling lasted ~4 days. Although current velocities did not exceed 5 cm/s, the enhanced circulation during the storm caused cold turbid intrusions at 75–95 m depth that are likely attributed to sub-glacial water from the Flade Isblink Ice Cap. It was also found that the semidiurnal periodicities in the temperature and salinity time series were associated with the lunar semidiurnal tidal flow. The vertical structure of tidal currents corresponded to the first baroclinic mode of the internal tide with a velocity minimum at ~40 m. The tidal ellipses rotate in opposite directions above and below this depth and cause a divergence of tidal flow which was observed to induce semidiurnal internal waves of about 3 m height at the front of the glacier terminus. Our findings provide evidence that shelf-basin interaction and tidal forcing can potentialy modify coastal Wandel Sea waters even though they are isolated from the atmosphere by landfast sea ice almost year round. The northerly storms over the continental slope cause an enhanced circulation facilitating a release of cold and turbid sub-glacial water to the shelf. The tidal flow may contribute to the removal of such water from the glacial terminus.


2021 ◽  
Author(s):  
Zhi Zeng ◽  
Peter Brandt ◽  
Kevin Lamb ◽  
Richard Greatbatch ◽  
Marcus Dengler ◽  
...  

&lt;p&gt;&lt;span&gt;In austral winter, biological productivity at the Angolan shelf reaches its maximum. The alongshore winds, however, reach their seasonal minimum suggesting that processes other than local wind-driven upwelling contribute to near-coastal cooling and upward nutrient supply, one possibility being mixing induced by internal tides (ITs). Here, we apply a three-dimensional ocean model to simulate the generation, propagation and dissipation of ITs at the Angolan continental slope and shelf. Model results are validated against moored acoustic Doppler current profiler and other observations. Simulated ITs are mainly generated in regions with a critical/supercritical slope typically between the 200- and 500-m isobaths. Mixing induced by ITs is found to be strongest close to the coast and gradually decreases offshore thereby contributing to the establishment of cross-shore temperature gradients. The available seasonal coverage of hydrographic data is used to design simulations to investigate the influence of seasonally varying stratification characterized by low stratification in austral winter and high stratification in austral summer. The results show that IT characteristics, such as their wavelengths, sea surface convergence patterns and baroclinic structure, have substantial seasonal variations and additionally strong spatial inhomogeneities. However, seasonal variations in the spatially-averaged generation, onshore flux and dissipation of IT energy are weak. By evaluating the change of potential energy, it is shown, nevertheless, that mixing due to ITs is more effective during austral winter. We argue this is because the weaker background stratification in austral winter than in austral summer acts as a preconditioning for IT mixing.&lt;/span&gt;&lt;/p&gt;


2015 ◽  
Vol 47 (3) ◽  
pp. 591-605 ◽  
Author(s):  
Thomas Kriechbaumer ◽  
Kim Blackburn ◽  
Nick Everard ◽  
Monica Rivas Casado

There has been an increasing interest in the use of Acoustic Doppler Current Profilers (ADCPs) to characterise the hydraulic conditions near river engineering structures such as dams, fish passes and groins, as part of ecological and hydromorphological assessments. However, such ADCP applications can be limited by compass errors, obstructed view to navigation satellites, frequent loss of bottom tracking and spatially heterogeneous flow leading to erroneous water velocity measurements. This study addresses these limitations by (i) developing a heading sensor integration algorithm that corrects compass errors from magnetic interference, (ii) testing a Total Station based technique for spatial ADCP data referencing and (iii) evaluating a recently proposed data processing technique that reduces bias from spatial flow heterogeneity. The integration of these techniques on a radio control ADCP platform is illustrated downstream of a weir with fish pass on the River Severn, UK. The results show that each of the techniques can have a statistically significant effect on the estimated total water velocities and can strongly affect measures of vorticity. The obtained three-dimensional flow maps are suitable to describe the magnitude and orientation of the fish pass attraction flow in relation to competing flows and to highlight areas of increased vorticity.


Water ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 2482
Author(s):  
Woochul Kang ◽  
Dongwoo Ko ◽  
Joongu Kang

This study evaluates a novel biopolymer-based material reinforcement method. A real-scale experiment minimizing flood disasters and economic losses incurred by the collapse of river levees due to overtopping was conducted. At the Andong River Experiment Center, lateral overflow was reproduced to induce levee collapse using sand, reinforced novel materials, and vegetation levees represented as cases 1, 2, and 3, respectively. The flow in the upstream and downstream areas was measured, and fluctuations in the lateral overflow discharge were calculated using an acoustic Doppler current profiler. To quantitatively verify the performance of this method, the collapse delay effect based on the surface loss rate of the levee slope was analyzed using image pixel analysis and three-dimensional point cloud modeling. Comparing the collapse delay effect of the new-material levee with that of the non-reinforced levees, we found a time delay of approximately 2.7–7 times from the occurrence of overtopping via the lateral flow to the end of the test. These results indicate that we can secure time for emergency repairs and operations by reinforcing the levee surface using the material proposed in this study. These research findings are expected to provide the basis for the proper design and construction of river levees.


2005 ◽  
Vol 22 (1) ◽  
pp. 84-97 ◽  
Author(s):  
L. Carrillo ◽  
A. J. Souza ◽  
A. E. Hill ◽  
J. Brown ◽  
L. Fernand ◽  
...  

Abstract This paper presents a comparison of two conventional detiding techniques carried out for ship-mounted acoustic Doppler current profiler (ADCP) data collected in the European shelf area of the Celtic Sea during the summer of 1998. One technique consisted of extracting the vertically averaged tidal currents obtained from a barotropic three-dimensional numerical tidal model. The second technique consisted of fitting the spatiotemporal ADCP data using least squares and polynomial spatial functions. In the least squares technique, the incorporation of zero velocity normal to the coast appears to improve the estimation of the tidal currents near the coast. Quantitative comparisons of the results from both techniques with historical current meter observations are shown. However, both methods showed limitations in accurately representing the tidal currents in the study area. Consequently, an alternative detiding technique is proposed. This technique consists of blending the tidal currents derived from the numerical model with those fitted to the ADCP data from the least squares method. Improved results were obtained using the blending technique. ADCP-derived residual currents were comparable with contemporaneous flows measured using drifting buoys and also with estimates obtained by geostrophic calculations.


Sign in / Sign up

Export Citation Format

Share Document