scholarly journals Impact of the Ocean Mixed Layer Diurnal Variations on the Intraseasonal Variability of Sea Surface Temperatures in the Atlantic Ocean*

2011 ◽  
Vol 24 (12) ◽  
pp. 2889-2914 ◽  
Author(s):  
Virginie Guemas ◽  
David Salas-Mélia ◽  
Masa Kageyama ◽  
Hervé Giordani ◽  
Aurore Voldoire
Keyword(s):  
Heat Flux ◽  
Atlantic Ocean ◽  
Surface Temperature ◽  
Wind Stress ◽  
Mixed Layer ◽  
Diurnal Variations ◽  
Surface Fluxes ◽  
Sea Surface ◽  
Sst Variability ◽  
The Tropics

Abstract This study investigates the nonlinear processes by which the ocean diurnal variations can affect the intraseasonal sea surface temperature (SST) variability in the Atlantic Ocean. The Centre National de Recherches Météorologiques one-dimensional ocean model (CNRMOM1D) is forced with the 40-yr ECMWF Re-Analysis (ERA-40) surface fluxes with a 1-h frequency in solar heat flux in a first simulation and with a daily forcing frequency in a second simulation. This model has a vertical resolution of 1 m near the surface. The comparison between both experiments shows that the daily mean surface temperature is modified by about 0.3°–0.5°C if the ocean diurnal variations are represented, and this correction can persist for 15–40 days in the midlatitudes and more than 60 days in the tropics. The so-called rectification mechanism, by which the ocean diurnal warming enhances the intraseasonal SST variability by 20%–40%, is found to be robust in the tropics. In contrast, in the midlatitudes, diurnal variations in wind stress and nonsolar heat flux are shown to affect the daily mean SST. For example, an intense wind stress or nonsolar heat flux toward the atmosphere during the first half of the day followed by weak fluxes during the second half result in a shallow mixed layer. The following day, the preconditioning results in heat being trapped near the surface and the daily mean surface temperature being higher than if these diurnal variations in surface forcings were not resolved.

Daily to Decadal Sea Surface Temperature Variability Driven by State-Dependent Stochastic Heat Fluxes

2006 ◽  
Vol 36 (10) ◽  
pp. 1940-1958 ◽  
Author(s):  
Philip Sura ◽  
Matthew Newman ◽  
Michael A. Alexander
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Mixed Layer ◽  
Multiplicative Noise ◽  
The State ◽  
Sea Surface ◽  
Sst Variability ◽  
State Dependent ◽  
Sst Anomalies

Abstract The classic Frankignoul–Hasselmann hypothesis for sea surface temperature (SST) variability of an oceanic mixed layer assumes that the surface heat flux can be simply parameterized as noise induced by atmospheric variability plus a linear temperature relaxation rate. It is suggested here, however, that rapid fluctuations in this rate, as might be expected, for example, from gustiness of the sea surface winds, are large enough that they cannot be ignored. Such fluctuations cannot be fully modeled by noise that is independent of the state of the SST anomaly itself. Rather, they require the inclusion of a state-dependent (i.e., multiplicative) noise term, which can be expected to affect both persistence and the relative occurrence of high-amplitude anomalies. As a test of this hypothesis, daily observations at several Ocean Weather Stations (OWSs) are examined. Significant skewness and kurtosis of the distributions of SST anomalies is found, which is shown to be consistent with a multiplicative noise model. The observed wintertime SST distribution at OWS P is reproduced using a single-column variable-depth mixed layer model; the resulting non-Gaussianity is found to be largely due to the state dependence of rapidly varying (effectively stochastic) sensible and latent heat flux anomalies. The authors’ model for the non-Gaussianity of anomalous SST variability (counterintuitively) implies that the multiplicative noise increases the persistence, predictability, and variance of midlatitude SST anomalies. The effect is strongest on annual and longer time scales and may, therefore, be important to the understanding and modeling of interannual and interdecadal SST and related climate variability.

scholarly journals Seasonality of Decadal Sea Surface Temperature Anomalies in the Northwestern Pacific

2006 ◽  
Vol 19 (12) ◽  
pp. 2953-2968 ◽  
Author(s):  
Takashi Mochizuki ◽  
Hideji Kida
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Mixed Layer ◽  
Surface Heat Flux ◽  
Heat Budget ◽  
Surface Heat ◽  
Sea Surface ◽  
Northwestern Pacific ◽  
Sst Anomaly

Abstract The seasonality of the decadal sea surface temperature (SST) anomalies and the related physical processes in the northwestern Pacific were investigated using a three-dimensional bulk mixed layer model. In the Kuroshio–Oyashio Extension (KOE) region, the strongest decadal SST anomaly was observed during December–February, while that of the central North Pacific occurred during February–April. From an examination of the seasonal heat budget of the ocean mixed layer, it was revealed that the seasonal-scale enhancement of the decadal SST anomaly in the KOE region was controlled by horizontal Ekman temperature transport in early winter and by vertical entrainment in autumn. The temperature transport by the geostrophic current made only a slight contribution to the seasonal variation of the decadal SST anomaly, despite controlling the upper-ocean thermal conditions on decadal time scales through the slow Rossby wave adjustment to the wind stress curl. When averaging over the entire KOE region, the contribution from the net sea surface heat flux was also no longer significantly detected. By examining the horizontal distributions of the local thermal damping rate, however, it was concluded that the wintertime decadal SST anomaly in the eastern KOE region was rather damped by the net sea surface heat flux. It was due to the fact that the anomalous local thermal damping of the SST anomaly resulting from the vertical entrainment in autumn was considerably strong enough to suppress the anomalous local atmospheric thermal forcing that acted to enhance the decadal SST anomaly.

scholarly journals U.S. West Coast Surface Heat Fluxes, Wind Stress, and Wind Stress Curl from a Mesoscale Model

2005 ◽  
Vol 133 (11) ◽  
pp. 3202-3216 ◽  
Author(s):  
T. Haack ◽  
S. D. Burk ◽  
R. M. Hodur
Keyword(s):  
Relative Humidity ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Wind Stress ◽  
Mesoscale Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sea Surface ◽  
Wind Stress Curl ◽  
Low Level

Abstract Monthly averages of numerical model fields are beneficial for depicting patterns in surface forcing such as sensible and latent heat fluxes, wind stress, and wind stress curl over data-sparse ocean regions. Grid resolutions less than 10 km provide the necessary mesoscale detail to characterize the impact of a complex coastline and coastal topography. In the present study a high-resolution mesoscale model is employed to reveal patterns in low-level winds, temperature, relative humidity, sea surface temperature as well as surface fluxes, over the eastern Pacific and along the U.S. west coast. Hourly output from successive 12-h forecasts are averaged to obtain monthly mean patterns from each season of 1999. The averages yield information on interactions between the ocean and the overlying atmosphere and on the influence of coastal terrain forcing in addition to their month-to-month variability. The spring to summer transition is characterized by a dramatic shift in near-surface winds, temperature, and relative humidity as offshore regions of large upward surface fluxes diminish and an alongshore coastal flux gradient forms. Embedded within this gradient, and the imprint of strong summertime topographic forcing, are small-scale fluctuations that vary in concert with local changes in sea surface temperature. Potential feedbacks between the low-level wind, sea surface temperature, and the wind stress curl are explored in the coastal regime and offshore waters. In all seasons, offshore extensions of colder coastal waters impose a marked influence on low-level conditions by locally enhancing stability and reducing the wind speed, while buoy measurements along the coast indicate that sea surface temperatures and wind speeds tend to be negatively correlated.

scholarly journals Mechanisms of Summertime Subtropical Southern Indian Ocean Sea Surface Temperature Variability: On the Importance of Humidity Anomalies and the Meridional Advection of Water Vapor*

2007 ◽  
Vol 20 (19) ◽  
pp. 4835-4852 ◽  
Author(s):  
A. M. Chiodi ◽  
D. E. Harrison
Keyword(s):  
Heat Flux ◽  
Water Vapor ◽  
Indian Ocean ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Latent Heat Flux ◽  
Sea Surface ◽  
Sst Variability ◽  
Flux Variability ◽  
Meridional Advection

Abstract It is well known that some austral summertime subtropical Indian Ocean sea surface temperature (SST) variability correlates with rainfall over certain regions of Africa that depend on rainfall for their economic well-being. Recent studies have determined that this SST variability is at least partially driven by latent heat flux variability, but the mechanism has not been fully described. Here, the mechanism that drives this SST variability is reexamined using analyses of operational air–sea fluxes, ocean mixed layer modeling, and simple atmospheric boundary layer physics. The SST variability of interest is confirmed to be mainly driven by latent heat flux variability, which is shown, for the first time, to be mainly caused by near-surface humidity variability. This humidity variability is then shown to be fundamentally driven by the anomalous meridional advection of water vapor. The meridional wind anomalies of interest are subsequently found to occur when the subtropical atmospheric anticyclone is preferentially located toward one of the sides (east/west) of the basin.

scholarly journals A Diagnostic Model for Mixed Layer Depth Estimation with Application to Ocean Station P in the Northeast Pacific

2009 ◽  
Vol 39 (6) ◽  
pp. 1399-1415 ◽  
Author(s):  
Richard E. Thomson ◽  
Isaac V. Fine
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Mixed Layer ◽  
Mixed Layer Depth ◽  
Depth Estimation ◽  
Surface Fluxes ◽  
Late Winter ◽  
Diagnostic Model ◽  
Layer Depth ◽  
Northeast Pacific

Abstract This paper presents a simple diagnostic model for estimating mixed layer depth based solely on the one-dimensional heat balance equation, the surface heat flux, and the sea surface temperature. The surface fluxes drive heating or cooling of the upper layer whereas the surface temperature acts as a “thermostat” that regulates the vertical extent of the layer. Daily mixed layer depth estimates from the diagnostic model (and two standard bulk mixed layer models) are compared with depths obtained from oceanic profiles collected during the 1956–80 Canadian Weathership program at Station P and more recent (2001–07) profiles from the vicinity of this station from Argo drifters. Summer mixed layer depths from the diagnostic model agree more closely with observed depths and are less sensitive to heat flux errors than those from bulk models. For the Weathership monitoring period, the root-mean-square difference between modeled and observed monthly mean mixed layer depths is ∼6 m for the diagnostic model and ∼10 m for the bulk models. The diagnostic model is simpler to apply than bulk models and sidesteps the need for wind data and turbulence parameterization required by these models. Mixed layer depths obtained from the diagnostic model using NCEP–NCAR reanalysis data reveal that—contrary to reports for late winter—there has been no significant trend in the summer mixed layer depth in the central northeast Pacific over the past 52 yr.

scholarly journals The bulk parameterizations of turbulent air-sea fluxes in NEMO4: the origin of Sea Surface Temperature differences in a global model study

2022 ◽  
Author(s):  
Giulia Bonino ◽  
Doroteaciro Iovino ◽  
Laurent Brodeau ◽  
Simona Masina
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Skin Temperature ◽  
Wind Stress ◽  
Ocean Model ◽  
Turbulent Heat Flux ◽  
Global Model ◽  
Sea Surface ◽  
Turbulent Heat

Abstract. Wind stress and turbulent heat fluxes are the major driving forces which modify the ocean dynamics and thermodynamics. In the NEMO ocean general circulation model, these turbulent air-sea fluxes (TASFs), which are components of the ocean model boundary conditions, can critically impact the simulated ocean characteristics. This paper investigates how the different bulk parametrizations to calculated turbulent air-sea fluxes in the NEMO4 (revision 12957) drives substantial differences in sea surface temperature (SST). Specifically, we study the contribution of different aspects and assumptions of the bulk parametrizations in driving the SST differences in NEMO global model configuration at ¼ degree of horizontal resolution. These include the use of the skin temperature instead of the bulk SST in the computation of turbulent heat flux components, the estimation of wind stress and the estimation of turbulent heat flux components which vary in each parametrization due to the different computation of the bulk transfer coefficients. The analysis of a set of short-term sensitivity experiments, where the only experimental change is related to one of the aspects of the bulk parametrizations, shows that parametrization-related SST differences are primarily sensitive to the wind stress differences across parametrizations and to the implementation of skin temperature in the computation of turbulent heat flux components. Moreover, in order to highlight the role of SST-turbulent heat flux negative feedback at play in ocean simulations, we compare the TASFs differences obtained using NEMO ocean model with the estimations from Brodeau et al. (2017), who compared the different bulk parametrizations using prescribed SST. Our estimations of turbulent heat flux differences between bulk parametrizations is weaker with respect to Brodeau et al. (2017) differences estimations.

scholarly journals Sea Surface Temperature Sensitivity to Water Turbidity from Simulations of the Turbid Black Sea Using HYCOM*

2005 ◽  
Vol 35 (1) ◽  
pp. 33-54 ◽  
Author(s):  
A. Birol Kara ◽  
Alan J. Wallcraft ◽  
Harley E. Hurlburt
Keyword(s):  
Heat Flux ◽  
Solar Radiation ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Black Sea ◽  
Mixed Layer ◽  
Sea Surface ◽  
The Black Sea ◽  
Clear Water ◽  
Water Turbidity

Abstract This paper examines the sensitivity of sea surface temperature (SST) to water turbidity in the Black Sea using the eddy-resolving (∼3.2-km resolution) Hybrid Coordinate Ocean Model (HYCOM), which includes a nonslab K-profile parameterization (KPP) mixed layer model. The KPP model uses a diffusive attenuation coefficient of photosynthetically active radiation (kPAR) processed from a remotely sensed dataset to take water turbidity into account. Six model experiments (expt) are performed with no assimilation of any ocean data and wind/thermal forcing from two sources: 1) European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA) and 2) Fleet Numerical Meteorology and Oceanography Center (FNMOC) Navy Operational Global Atmospheric Prediction System (NOGAPS). Forced with ECMWF, experiment 1 uses spatially and monthly varying kPAR values over the Black Sea, experiment 2 assumes all of the solar radiation is absorbed at the sea surface, and experiment 3 uses a constant kPAR value of 0.06 m−1, representing clear-water constant solar attenuation depth of 16.7 m. Experiments 4, 5, and 6 are twins of 1, 2, and 3 but forced with NOGAPS. The monthly averaged model SSTs resulting from all experiments are then compared with a fine-resolution (∼9 km) satellite-based monthly SST climatology (the Pathfinder climatology). Because of the high turbidity in the Black Sea, it is found that a clear-water constant attenuation depth (i.e., expts 3 and 6) results in SST bias as large as 3°C in comparison with standard simulations (expts 1 and 4) over most of the Black Sea in summer. In particular, when using the clear-water constant attenuation depth as opposed to using spatial and temporal kPAR, basin-averaged rms SST difference with respect to the Pathfinder SST climatology increases ∼46% (from 1.41°C in expt 1 to 2.06°C in expt 3) in the ECMWF forcing case. Similarly, basin-averaged rms SST difference increases ∼36% (from 1.39°C in expt 4 to 1.89°C in expt 6) in the NOGAPS forcing case. The standard HYCOM simulations (expts 1 and 4) have a very high basin-averaged skill score of 0.95, showing overall model success in predicting climatological SST, even with no assimilation of any SST data. In general, the use of spatially and temporally varying turbidity fields is necessary for the Black Sea OGCM studies because there is strong seasonal cycle and large spatial variation in the solar attenuation coefficient, and an additional simulation using a constant kPAR value of 0.19 m−1, the Sea-Viewing Wide Field-of-View Sensor (SeaWiFS) space–time mean for the Black Sea, did not yield as accurate SST results as experiments 1 and 4. Model–data comparisons also revealed that relatively large HYCOM SST errors close to the coastal boundaries can be attributed to the misrepresentation of land– sea mask in the ECMWF and NOGAPS products. With the relatively accurate mask used in NOGAPS, HYCOM demonstrated the ability to simulate accurate SSTs in shallow water over the broad northwest shelf in the Black Sea, a region of large errors using the inaccurate mask in ECMWF. A linear relationship is found between changes in SST and changes in heat flux below the mixed layer. Specifically, a change of ∼50 W m−2 in sub-mixed-layer heat flux results in a SST change of ∼3.0°C, a value that occurs when using clear-water constant attenuation depth rather than monthly varying kPAR in the model simulations, clearly demonstrating potential impact of penetrating solar radiation on SST simulations.

scholarly journals Coupling Ocean Currents and Waves with Wind Stress over the Gulf Stream

2019 ◽  
Vol 11 (12) ◽  
pp. 1476 ◽  
Author(s):  
Qi Shi ◽  
Mark A. Bourassa
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Latent Heat Flux ◽  
Wind Stress ◽  
Gulf Stream ◽  
Satellite Observations ◽  
Sea Surface ◽  
Current Stress ◽  
Induced Changes

This study provides the first detailed analysis of oceanic and atmospheric responses to the current-stress, wave-stress, and wave-current-stress interactions around the Gulf Stream using a high-resolution three-way coupled regional modeling system. In general, our results highlight the substantial impact of coupling currents and/or waves with wind stress on the air–sea fluxes over the Gulf Stream. The stress and the curl of the stress are crucial to mixed-layer energy budgets and sea surface temperature. In the wave-current-stress coupled experiment, wind stress increased by 15% over the Gulf Stream. Alternating positive and negative bands of changes of Ekman-related vertical velocity appeared in response to the changes of the wind stress curl along the Gulf Stream, with magnitudes exceeding 0.3 m/day (the 95th percentile). The response of wind stress and its curl to the wave-current-stress coupling was not a linear combination of responses to the wave-stress coupling and the current-stress coupling because the ocean and wave induced changes in the atmosphere showed substantial feedback on the ocean. Changes of a latent heat flux in excess of 20 W/m2 and a sensible heat flux in excess of 5 W/m2 were found over the Gulf Stream in all coupled experiments. Sensitivity tests show that sea surface temperature (SST) induced difference of air–sea humidity is a major contributor to latent heat flux (LHF) change. Validation is challenging because most satellite observations lack the spatial resolution to resolve the current-induced changes in wind stress curls and heat fluxes. Scatterometer observations can be used to examine the changes in wind stress across the Gulf Stream. The conversion of model data to equivalent neutral winds is highly dependent on the physics considered in the air–sea turbulent fluxes, as well as air–sea temperature differences. This sensitivity is shown to be large enough that satellite observations of winds can be used to test the flux parameterizations in coupled models.

scholarly journals Insights into Decadal North Atlantic Sea Surface Temperature and Ocean Heat Content Variability from an Eddy-Permitting Coupled Climate Model

2019 ◽  
Vol 32 (18) ◽  
pp. 6137-6161 ◽  
Author(s):  
B. I. Moat ◽  
B. Sinha ◽  
S. A. Josey ◽  
J. Robson ◽  
P. Ortega ◽  
...  
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Time Scales ◽  
Mixed Layer ◽  
North Atlantic ◽  
Climate Model ◽  
Heat Content ◽  
Ocean Heat Content ◽  
Sea Surface

Abstract An ocean mixed layer heat budget methodology is used to investigate the physical processes determining subpolar North Atlantic (SPNA) sea surface temperature (SST) and ocean heat content (OHC) variability on decadal to multidecadal time scales using the state-of-the-art climate model HadGEM3-GC2. New elements include development of an equation for evolution of anomalous SST for interannual and longer time scales in a form analogous to that for OHC, parameterization of the diffusive heat flux at the base of the mixed layer, and analysis of a composite Atlantic meridional overturning circulation (AMOC) event. Contributions to OHC and SST variability from two sources are evaluated: 1) net ocean–atmosphere heat flux and 2) all other processes, including advection, diffusion, and entrainment for SST. Anomalies in OHC tendency propagate anticlockwise around the SPNA on multidecadal time scales with a clear relationship to the phase of the AMOC. AMOC anomalies lead SST tendencies, which in turn lead OHC tendencies in both the eastern and western SPNA. OHC and SST variations in the SPNA on decadal time scales are dominated by AMOC variability because it controls variability of advection, which is shown to be the dominant term in the OHC budget. Lags between OHC and SST are traced to differences between the advection term for OHC and the advection–entrainment term for SST. The new results have implications for interpretation of variations in Atlantic heat uptake in the CMIP6 climate model assessment.

Sign in / Sign up

Export Citation Format

Share Document