Validation of Solar Radiation Surfaces from MODIS and Reanalysis Data over Topographically Complex Terrain

2009 ◽  
Vol 48 (12) ◽  
pp. 2441-2458 ◽  
Author(s):  
Todd A. Schroeder ◽  
Robbie Hember ◽  
Nicholas C. Coops ◽  
Shunlin Liang
Keyword(s):  
Solar Radiation ◽  
Land Surface ◽  
Forest Productivity ◽  
Reanalysis Data ◽  
Early Summer ◽  
Productive Capacity ◽  
Terrain Effects ◽  
Input Radiation ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Vegetation Models

Abstract The magnitude and distribution of incoming shortwave solar radiation (SW↓) has significant influence on the productive capacity of forest vegetation. Models that estimate forest productivity require accurate and spatially explicit radiation surfaces that resolve both long- and short-term temporal climatic patterns and that account for topographic variability of the land surface. This paper presents a validation of monthly average total (SW↓t) and diffuse ( SW↓df ) incoming solar radiation surfaces taken from North American Regional Reanalysis (NARR) data and Moderate Resolution Imaging Spectroradiometer (MODIS) satellite imagery for a mountainous region of the Pacific northwestern United States and Canada. A topographic solar radiation model based on a regionally defined clearness index was used to downscale the 32-km NARR SW↓t surfaces to 1 km, resulting in surfaces that better matched the spatial resolution of MODIS, as well as accounted for elevation and terrain effects including shadowing. Validation was carried out using a series of ground station measurements (n = 304) collected in 2003. The results indicated that annually, the NARR and MODIS SW↓t surfaces were both in strong agreement with ground measurements (r = 0.98 and 0.97), although the strength and bias of the relationships varied considerably by month. Correlations were highest in winter, early summer, and fall and lowest in spring. The NARR and MODIS SW↓df surfaces displayed poorer agreement with ground measurements (r = 0.89 and 0.79), the result of some months having negative correlations. The correlation and spatial structure between NARR and MODIS SW↓t surfaces was enhanced by topographic correction, resulting in more consistent input radiation surfaces for use in broad-scale forest productivity modeling.

A technique to predict hourly potential solar radiation and temperature for a mostly unmonitored area in the Cape Breton Highlands

1998 ◽  
Vol 78 (3) ◽  
pp. 409-420 ◽  
Author(s):  
Charles P.-A. Bourque ◽  
Jeremy J. Gullison
Keyword(s):  
Solar Radiation ◽  
Land Surface ◽  
Time Of Day ◽  
Slope Aspect ◽  
Clear Sky ◽  
Digital Terrain ◽  
Cape Breton ◽  
Grande Anse ◽  
Artificial Neural ◽  
Vegetation Models

A technique was developed to obtain predictions of potential solar radiation and temperature for a prescribed, mostly unmonitored, area in the Cape Breton Highlands region of northeastern Nova Scotia (46°39′N 60°57′W to 46°40′N 60°24′W). Hourly predictions of incoming solar radiation are based on relations of sun-earth geometry, clear-sky atmospheric transmittance, and land-surface attributes resolved from digital terrain and vegetation models. The digital vegetation model characterizes vegetation cover and is used to define the average midday albedoes for the area in question. Hourly albedoes are calculated according to assigned mid-day albedo and sun-illumination angles. Land-surface characteristics (elevation, slope, aspect, horizon angles, terrain configuration factor, and view factor) affect total incident solar radiation by affecting the direct, diffused, and reflected energy components. Hourly spatial variability in above-ground daytime temperature is captured by way of a fully trained artificial neural network (ANN) that describes hourly fluctuations of interior highland temperatures according to i) reference temperatures taken at two lowland locations, one at Ingonish Beach and the other at Grande Anse; ii) distance from a north-south line representing the east coast of the study area and from the Grande Anse location; iii) time of day; and iv) land-surface attributes. Training the ANN involves supplying the network with actual data and having the network adjust its internal weights iteratively so that the output values are sufficiently close to the supplied target values. Comparison of predicted and observed hourly spring-summer (1997) temperatures revealed that the constructed ANN explained over 88% of the variability exhibited in the observed temperatures and that the standard error of estimate was 2.0 °C (mean absolute error = 1.5 °C). Key words: Sun-earth geometry, radiation laws, variable surface albedo, clear-sky atmospheric transmissivity, digital terrain, vegetation models, artificial neural networks

scholarly journals A Fused Variable by Night Light Images and MODIS Products for Improving Urban Built-Up Area Extraction

Technologies ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 40
Author(s):  
Guang Yang ◽  
Yuntao Ma ◽  
Jiaqi Hu
Keyword(s):  
Surface Temperature ◽  
Land Surface ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Extraction Methods ◽  
Average Error ◽  
Geographic Coordinate System ◽  
Optimal Thresholds ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Spatial Locations

The boundary of urban built-up areas is the baseline data of a city. Rapid and accurate monitoring of urban built-up areas is the prerequisite for the boundary control and the layout of urban spaces. In recent years, the night light satellite sensors have been employed in urban built-up area extraction. However, the existing extraction methods have not fully considered the properties that directly reflect the urban built-up areas, like the land surface temperature. This research first converted multi-source data into a uniform projection, geographic coordinate system and resampling size. Then, a fused variable that integrated the Defense Meteorological Satellite Program/Operational Linescan System (DMSP/OLS) night light images, the Moderate-resolution Imaging Spectroradiometer (MODIS) surface temperature product and the normalized difference vegetation index (NDVI) product was designed to extract the built-up areas. The fusion results showed that the values of the proposed index presented a sharper gradient within a smaller spatial range, compared with the only night light images. The extraction results were tested in both the area sizes and the spatial locations. The proposed index performed better in both accuracies (average error rate 1.10%) and visual perspective. We further discussed the regularity of the optimal thresholds in the final boundary determination. The optimal thresholds of the proposed index were more stable in different cases on the premise of higher accuracies.

scholarly journals Assessment of the EUMETSAT Multi Decadal Land Surface Albedo Data Record from Meteosat Observations

2021 ◽  
Vol 13 (10) ◽  
pp. 1992
Author(s):  
Alessio Lattanzio ◽  
Michael Grant ◽  
Marie Doutriaux-Boucher ◽  
Rob Roebeling ◽  
Jörg Schulz
Keyword(s):  
Land Surface ◽  
Surface Albedo ◽  
Time Range ◽  
Essential Variable ◽  
Spatial Coverage ◽  
Data Record ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Cloud Mask ◽  
Cloud Screening

Surface albedo, defined as the ratio of the surface-reflected irradiance to the incident irradiance, is one of the parameters driving the Earth energy budget and it is for this reason an essential variable in climate studies. Instruments on geostationary satellites provide suitable observations allowing long-term monitoring of surface albedo from space. In 2012, EUMETSAT published Release 1 of the Meteosat Surface Albedo (MSA) data record. The main limitation effecting the quality of this release was non-removed clouds by the incorporated cloud screening procedure that caused too high albedo values, in particular for regions with permanent cloud coverage. For the generation of Release 2, the MSA algorithm has been replaced with the Geostationary Surface Albedo (GSA) one, able to process imagery from any geostationary imager. The GSA algorithm exploits a new, improved, cloud mask allowing better cloud screening, and thus fixing the major limitation of Release 1. Furthermore, the data record has an extended temporal and spatial coverage compared to the previous release. Both Black-Sky Albedo (BSA) and White-Sky Albedo (WSA) are estimated, together with their associated uncertainties. A direct comparison between Release 1 and Release 2 clearly shows that the quality of the retrieval improved significantly with the new cloud mask. For Release 2 the decadal trend is less than 1% over stable desert sites. The validation against Moderate Resolution Imaging Spectroradiometer (MODIS) and the Southern African Regional Science Initiative (SAFARI) surface albedo shows a good agreement for bright desert sites and a slightly worse agreement for urban and rain forest locations. In conclusion, compared with MSA Release 1, GSA Release 2 provides the users with a significantly more longer time range, reliable and robust surface albedo data record.

scholarly journals GlobSim (v1.0): deriving meteorological time series for point locations from multiple global reanalyses

2019 ◽  
Vol 12 (11) ◽  
pp. 4661-4679 ◽  
Author(s):  
Bin Cao ◽  
Xiaojing Quan ◽  
Nicholas Brown ◽  
Emilie Stewart-Jones ◽  
Stephan Gruber
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Ground Surface ◽  
Reanalysis Data ◽  
Meteorological Variables ◽  
Ensemble Simulations ◽  
Driving Time ◽  
Wide Range ◽  
Global Coverage ◽  
Uncertain Input

Abstract. Simulations of land-surface processes and phenomena often require driving time series of meteorological variables. Corresponding observations, however, are unavailable in most locations, even more so, when considering the duration, continuity and data quality required. Atmospheric reanalyses provide global coverage of relevant meteorological variables, but their use is largely restricted to grid-based studies. This is because technical challenges limit the ease with which reanalysis data can be applied to models at the site scale. We present the software toolkit GlobSim, which automates the downloading, interpolation and scaling of different reanalyses – currently ERA5, ERA-Interim, JRA-55 and MERRA-2 – to produce meteorological time series for user-defined point locations. The resulting data have consistent structure and units to efficiently support ensemble simulation. The utility of GlobSim is demonstrated using an application in permafrost research. We perform ensemble simulations of ground-surface temperature for 10 terrain types in a remote tundra area in northern Canada and compare the results with observations. Simulation results reproduced seasonal cycles and variation between terrain types well, demonstrating that GlobSim can support efficient land-surface simulations. Ensemble means often yielded better accuracy than individual simulations and ensemble ranges additionally provide indications of uncertainty arising from uncertain input. By improving the usability of reanalyses for research requiring time series of climate variables for point locations, GlobSim can enable a wide range of simulation studies and model evaluations that previously were impeded by technical hurdles in obtaining suitable data.

A novel application of an adaptive surrogate-based modeling optimization (ASMO) for the Community Territory System Model (CTSM) in Alaska

2021 ◽  
Author(s):  
Yifan Cheng ◽  
Andrew Newman ◽  
Sean Swenson ◽  
David Lawrence ◽  
Anthony Craig ◽  
...  
Keyword(s):  
High Resolution ◽  
River Basin ◽  
Land Surface ◽  
Computational Cost ◽  
Reanalysis Data ◽  
Freshwater Ecosystems ◽  
System Model ◽  
Surface Model ◽  
Yukon River ◽  
Yukon River Basin

<p>Climate-induced changes in snow cover, river flow, and freshwater ecosystems will greatly affect the indigenous groups in the Alaska and Yukon River Basin. To support policy-making on climate adaptation and mitigation for these underrepresented groups, an ongoing interdisciplinary effort is being made to combine Indigenous Knowledge with western science (https://www.colorado.edu/research/arctic-rivers/).</p><p>A foundational component of this project is a high fidelity representation of the aforementioned land surface processes. To this end, we aim to obtain a set of reliable high-resolution parameters for the Community Territory System Model (CTSM) for the continental scale domain of Alaska and the entire Yukon River Basin, which will be used in climate change simulations. CTSM is a complex, physically based state-of-the-science land surface model that includes complex vegetation and canopy representation, a multi-layer snow model, as well as hydrology and frozen soil physics necessary for the representation of streamflow and permafrost. Two modifications to the default CTSM configuration were made. First, we used CTSM that is implemented with hillslope hydrology to better capture the fine-scale hydrologic spatial heterogeneity in complex terrain. Second, we updated the input soil textures and organic carbon in CTSM using the high-resolution SoilGrid dataset.</p><p>In this study, we performed a multi-objective optimization on snow and streamflow metrics using an adaptive surrogate-based modeling optimization (ASMO). ASMO permits optimization of complex land-surface models over large domains through the use of surrogate models to minimize the computational cost of running the full model for every parameter combination. We ran CTSM at a spatial resolution of 1/24<sup>th</sup> degree and a temporal resolution of one hour using the ERA5 reanalysis data as the meteorological forcings. The ERA5 reanalysis data were bias-corrected to account for the orographic effects. We will discuss the ASMO-CTSM coupling workflow, performance characteristics of the optimization (e.g., computational cost, iterations), and comparisons of the default configuration and optimized model performance.</p>

scholarly journals Advantages of using a fast urban canopy model as compared to a full mesoscale model to simulate the urban heat island of Barcelona

2016 ◽  
Author(s):  
M. García-Díez ◽  
D. Lauwaet ◽  
H. Hooyberghs ◽  
J. Ballester ◽  
K. De Ridder ◽  
...  
Keyword(s):  
Simple Model ◽  
Land Surface ◽  
Climate Model ◽  
Mesoscale Model ◽  
Urban Climate ◽  
Urban Canopy ◽  
Forecast Model ◽  
Reanalysis Data ◽  
Urban Canopy Model ◽  
Canopy Model

Abstract. As most of the population lives in urban environments, the simulation of the urban climate has become a key problem in the framework of the climate change impact assessment. However, the high computational power required by these simulations is a severe limitation. Here we present a study on the performance of a Urban Climate Model (UrbClim), designed to be several orders of magnitude faster than a full-fledge mesoscale model. The simulations are validated with station data and with land surface temperature observations retrieved by satellites. To explore the advantages of using a simple model like UrbClim, the results are compared with a simulation carried out with a state-of-the-art mesoscale model, the Weather Research and Forecasting model, using an Urban Canopy model. The effect of using different driving data is explored too, by using both relatively low resolution reanalysis data (70 km) and a higher resolution forecast model (15 km). The results show that, generally, the performance of the simple model is comparable to or better than the mesoscale model. The exception are the winds and the day-to-day correlation in the reanalysis driven run, but these problems disappear when taking the boundary conditions from the higher resolution forecast model.

scholarly journals 1-km-resolution land surface analysis over Japan: Impact of satellite-derived solar radiation

2015 ◽  
Vol 9 (1) ◽  
pp. 14-19 ◽  
Author(s):  
Shunji Kotsuki ◽  
Hideaki Takenaka ◽  
Kenji Tanaka ◽  
Atsushi Higuchi ◽  
Takemasa Miyoshi
Keyword(s):  
Solar Radiation ◽  
Surface Analysis ◽  
Land Surface

scholarly journals Nonstationarity in Southern Hemisphere Climate Variability Associated with the Seasonal Breakdown of the Stratospheric Polar Vortex

2017 ◽  
Vol 30 (18) ◽  
pp. 7125-7139 ◽  
Author(s):  
Nicholas J. Byrne ◽  
Theodore G. Shepherd ◽  
Tim Woollings ◽  
R. Alan Plumb
Keyword(s):  
Climate Variability ◽  
Southern Hemisphere ◽  
Seasonal Cycle ◽  
Vortex Breakdown ◽  
Polar Vortex ◽  
Reanalysis Data ◽  
Early Summer ◽  
Stratospheric Polar Vortex ◽  
Time Symmetry

Abstract Statistical models of climate generally regard climate variability as anomalies about a climatological seasonal cycle, which are treated as a stationary stochastic process plus a long-term seasonally dependent trend. However, the climate system has deterministic aspects apart from the climatological seasonal cycle and long-term trends, and the assumption of stationary statistics is only an approximation. The variability of the Southern Hemisphere zonal-mean circulation in the period encompassing late spring and summer is an important climate phenomenon and has been the subject of numerous studies. It is shown here, using reanalysis data, that this variability is rendered highly nonstationary by the organizing influence of the seasonal breakdown of the stratospheric polar vortex, which breaks time symmetry. It is argued that the zonal-mean tropospheric circulation variability during this period is best viewed as interannual variability in the transition between the springtime and summertime regimes induced by variability in the vortex breakdown. In particular, the apparent long-term poleward jet shift during the early-summer season can be more simply understood as a delay in the equatorward shift associated with this regime transition. The implications of such a perspective for various open questions are discussed.

scholarly journals A statistics-based temporal filter algorithm to map spatiotemporally continuous shortwave albedo from MODIS data

2013 ◽  
Vol 17 (6) ◽  
pp. 2121-2129 ◽  
Author(s):  
N. F. Liu ◽  
Q. Liu ◽  
L. Z. Wang ◽  
S. L. Liang ◽  
J. G. Wen ◽  
...  
Keyword(s):  
Time Series ◽  
Temporal Resolution ◽  
Land Surface ◽  
Surface Albedo ◽  
Critical Role ◽  
Radiant Energy ◽  
High Temporal Resolution ◽  
Land Surface Parameter ◽  
Temporal Filter ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. Land-surface albedo plays a critical role in the earth's radiant energy budget studies. Satellite remote sensing provides an effective approach to acquire regional and global albedo observations. Owing to cloud coverage, seasonal snow and sensor malfunctions, spatiotemporally continuous albedo datasets are often inaccessible. The Global LAnd Surface Satellite (GLASS) project aims at providing a suite of key land surface parameter datasets with high temporal resolution and high accuracy for a global change study. The GLASS preliminary albedo datasets are global daily land-surface albedo generated by an angular bin algorithm (Qu et al., 2013). Like other products, the GLASS preliminary albedo datasets are affected by large areas of missing data; beside, sharp fluctuations exist in the time series of the GLASS preliminary albedo due to data noise and algorithm uncertainties. Based on the Bayesian theory, a statistics-based temporal filter (STF) algorithm is proposed in this paper to fill data gaps, smooth albedo time series, and generate the GLASS final albedo product. The results of the STF algorithm are smooth and gapless albedo time series, with uncertainty estimations. The performance of the STF method was tested on one tile (H25V05) and three ground stations. Results show that the STF method has greatly improved the integrity and smoothness of the GLASS final albedo product. Seasonal trends in albedo are well depicted by the GLASS final albedo product. Compared with MODerate resolution Imaging Spectroradiometer (MODIS) product, the GLASS final albedo product has a higher temporal resolution and more competence in capturing the surface albedo variations. It is recommended that the quality flag should be always checked before using the GLASS final albedo product.

scholarly journals Satellite observations of changes in snow-covered land surface albedo during spring in the Northern Hemisphere

2015 ◽  
Vol 9 (5) ◽  
pp. 1879-1893 ◽  
Author(s):  
K. Atlaskina ◽  
F. Berninger ◽  
G. de Leeuw
Keyword(s):  
Snow Cover ◽  
Northern Hemisphere ◽  
Air Temperature ◽  
Land Surface ◽  
Surface Albedo ◽  
Vegetation Index ◽  
Precipitation Amount ◽  
Snow Cover Fraction ◽  
Air Temperatures ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. Thirteen years of Moderate Resolution Imaging Spectroradiometer (MODIS) surface albedo data for the Northern Hemisphere during the spring months (March–May) were analyzed to determine temporal and spatial changes over snow-covered land surfaces. Tendencies in land surface albedo change north of 50° N were analyzed using data on snow cover fraction, air temperature, vegetation index and precipitation. To this end, the study domain was divided into six smaller areas, based on their geographical position and climate similarity. Strong differences were observed between these areas. As expected, snow cover fraction (SCF) has a strong influence on the albedo in the study area and can explain 56 % of variation of albedo in March, 76 % in April and 92 % in May. Therefore the effects of other parameters were investigated only for areas with 100 % SCF. The second largest driver for snow-covered land surface albedo changes is the air temperature when it exceeds a value between −15 and −10 °C, depending on the region. At monthly mean air temperatures below this value no albedo changes are observed. The Enhanced Vegetation Index (EVI) and precipitation amount and frequency were independently examined as possible candidates to explain observed changes in albedo for areas with 100 % SCF. Amount and frequency of precipitation were identified to influence the albedo over some areas in Eurasia and North America, but no clear effects were observed in other areas. EVI is positively correlated with albedo in Chukotka Peninsula and negatively in eastern Siberia. For other regions the spatial variability of the correlation fields is too high to reach any conclusions.

Sign in / Sign up

Export Citation Format

Share Document