Effect of Nb Content on Superelastic Properties of Biomedical Ti–Zr-Based Shape Memory Alloys

2020 ◽  
Vol 12 (9) ◽  
pp. 1394-1398
Author(s):  
Shuanglei Li ◽  
Mi-Seon Choi ◽  
Tae-Hyun Nam
Keyword(s):  
Tensile Test ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
Arc Melting ◽  
Nb Content

Ti–18Zr–xNb–2Sn (x = 10, 11, 11.5, 12, 12.5) (at.%) shape memory alloys were fabricated by arc melting then phase constitutions and superelastic properties were investigated by X-ray diffraction (XRD) and tensile test at various temperatures between 178 K and 413 K. Excellent superelasticity was observed in 12.5Nb alloy at temperatures between 258 K and 298 K. Both superelasticity and shape memory effect were observed in 12Nb alloy at temperatures between 233 K and 383 K. Only shape memory effect was observed in 11Nb and 11.5Nb alloys at temperatures between 298 K and 383 K. 12.5Nb and 12Nb alloys consisted of the main β phase and athermal ω. The amount of β phase decreased with increasing Nb content. 10Nb alloy consisted of main α″ martensite and a small amount of β phase. The Ms temperature measured from the Clausius–Clapeyron relationship decreased greatly with increasing Nb content (100 K/at.% Nb) in these Ti–Zr–Nb–Sn alloys.

scholarly journals Thin Films of AuCuAl Shape Memory Alloy for Use in Plasmonic Nano-actuators

2011 ◽  
Vol 1295 ◽  
Author(s):  
Vijay Bhatia ◽  
Gordon Thorogood ◽  
Annette Dowd ◽  
Michael B. Cortie
Keyword(s):  
Thin Films ◽  
Shape Memory Alloy ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
X Ray ◽  
Β Phase

ABSTRACTWe describe the fabrication and structure of nanoscale thin films of β phase shape memory alloys with the nominal atomic stoichiometry Au7Cu5Al4 (corresponding to 5.8 wt% Al). These alloys possess properties that suggest they could be used in nanoscale actuators. The films described here are between 20 and 50 nm thick which is below the thickness at which some other shape memory alloys cease to transform. However, microstructural and X-ray studies confirm that the coatings still exhibit the displacive transformations that are a prerequisite for the shape memory effect.

scholarly journals Study of Structural, Magnetic, and Mossbauer Properties of Dy2Fe16Ga1−xNbx (0.0 ≤ x ≤ 1.0) Prepared via Arc Melting Process

2021 ◽  
Vol 7 (3) ◽  
pp. 42
Author(s):  
Jiba N. Dahal ◽  
Kalangala Sikkanther Syed Ali ◽  
Sanjay R. Mishra
Keyword(s):  
Isomer Shift ◽  
Cell Volume ◽  
Intermetallic Compounds ◽  
Unit Cell Volume ◽  
Rietveld Analysis ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Arc Melting ◽  
Nb Content

Intermetallic compounds of Dy2Fe16Ga1−xNbx (x = 0.0 to 1.00) were synthesized by arc melting. Samples were investigated for structural, magnetic, and hyperfine properties using X-ray diffraction, vibration sample magnetometer, and Mossbauer spectrometer, respectively. The Rietveld analysis of room temperature X-ray diffraction data shows that all the samples were crystallized in Th2Fe17 structure. The unit cell volume of alloys increased linearly with an increase in Nb content. The maximum Curie temperature Tc ~523 K for x = 0.6 sample is higher than Tc = 153 K of Dy2Fe17. The saturation magnetization decreased linearly with increasing Nb content from 61.57 emu/g for x = 0.0 to 42.46 emu/g for x = 1.0. The Mössbauer spectra and Rietveld analysis showed a small amount of DyFe3 and NbFe2 secondary phases at x = 1.0. The hyperfine field of Dy2Fe16Ga1−xNbx decreased while the isomer shift values increased with the Nb content. The observed increase in isomer shift may have resulted from the decrease in s electron density due to the unit cell volume expansion. The substantial increase in Tc of thus prepared intermetallic compounds is expected to have implications in magnets used for high-temperature applications.

On the impact of lattice parameter accuracy of atomistic simulations on the microstructure of Ni-Ti shape memory alloys

2021 ◽  
Author(s):  
Lorenzo La Rosa ◽  
Francesco Maresca
Keyword(s):  
Molecular Dynamics ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Lattice Parameter ◽  
Lattice Parameters ◽  
Atomistic Simulations ◽  
Interatomic Potentials ◽  
The Impact

Abstract Ni-Ti is a key shape memory alloy (SMA) system for applications, being cheap and having good mechanical properties. Recently, atomistic simulations of Ni-Ti SMAs have been used with the purpose of revealing the nano-scale mechanisms that control superelasticity and the shape memory effect, which is crucial to guide alloying or processing strategies to improve materials performance. These atomistic simulations are based on molecular dynamics modelling that relies on (empirical) interatomic potentials. These simulations must reproduce accurately the mechanism of martensitic transformation and the microstructure that it originates, since this controls both superelasticity and the shape memory effect. As demonstrated by the energy minimization theory of martensitic transformations [Ball, James (1987) Archive for Rational Mechanics and Analysis, 100:13], the microstructure of martensite depends on the lattice parameters of the austenite and the martensite phases. Here, we compute the bounds of possible microstructural variations based on the experimental variations/uncertainties in the lattice parameter measurements. We show that both density functional theory and molecular dynamics lattice parameters are typically outside the experimental range, and that seemingly small deviations from this range induce large deviations from the experimental bounds of the microstructural predictions, with notable cases where unphysical microstructures are predicted to form. Therefore, our work points to a strategy for benchmarking and selecting interatomic potentials for atomistic modelling of shape memory alloys, which is crucial to modelling the development of martensitic microstructures and their impact on the shape memory effect.

Cold Bending a Ni-Ti Shape Memory Alloy Wire

2015 ◽  
Vol 661 ◽  
pp. 98-104 ◽  
Author(s):  
Kuang-Jau Fann ◽  
Pao Min Huang
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Room Temperature ◽  
Aging Treatment ◽  
Treatment Temperature ◽  
Bending Test ◽  
Solution Treatment Temperature

Because of being in possession of shape memory effect and superelasticity, Ni-Ti shape memory alloys have earned more intense gaze on the next generation applications. Conventionally, Ni-Ti shape memory alloys are manufactured by hot forming and constraint aging, which need a capital-intensive investment. To have a cost benefit getting rid of plenty of die sets, this study is aimed to form Ni-Ti shape memory alloys at room temperature and to age them at elevated temperature without any die sets. In this study, starting with solution treatments at various temperatures, which served as annealing process, Ni-rich Ni-Ti shape memory alloy wires were bent by V-shaped punches in different curvatures at room temperature. Subsequently, the wires were aged at different temperatures to have shape memory effect. As a result, springback was found after withdrawing the bending punch and further after the aging treatment as well. A higher solution treatment temperature or a smaller bending radius leads to a smaller springback, while a higher aging treatment temperature made a larger springback. This springback may be compensated by bending the wires in further larger curvatures to keep the shape accuracy as designed. To explore the shape memory effect, a reverse bending test was performed. It shows that all bent wires after aging had a shape recovery rate above 96.3% on average.

Effect of the Cutting Velocity and Heat Treatment on Turning Cutting Forces of an SMA Cu-Al-Be Alloys

2013 ◽  
Vol 758 ◽  
pp. 157-164
Author(s):  
Francisco Valdenor Pereira da Silva ◽  
José Paulo Vogel ◽  
Rodinei Medeiros Gomes ◽  
Tadeu Antonio de Azevedo Melo ◽  
Anna Carla Araujo ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Cutting Force ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Chip Formation ◽  
Cutting Forces ◽  
Cutting Velocity ◽  
Resultant Forces

This work studies the effect of heat treatment and cutting velocities on machining cutting forces in turning of a Cu-11.8%Al-0.55%Be shape memory alloys. The heat treatment was performed to obtain samples with austenite and martensite microstructures. Cutting force was investigated using a 3-component dynamometer in several revolutions and data were analyzed using statistic tools. It was found that the resultant forces were higher in quenched alloy due to the presence of Shape Memory Effect. Chip formation occurred in a shorter time in the sample without the Shape Memory Effect.

Sign in / Sign up

Export Citation Format

Share Document