Characteristics of Al Doped ZnO Films Prepared on Polyethylene Terephthalate Substrate by Unbalanced Magnetron Sputtering Method for Organic Thin Film Transistors

2015 ◽  
Vol 7 (1) ◽  
pp. 151-156
Author(s):  
Jaehyeong Lee ◽  
Yong Seob Park
Keyword(s):  
Thin Film ◽  
Magnetron Sputtering ◽  
Thin Film Transistors ◽  
Organic Thin Film Transistors ◽  
Zno Films ◽  
Organic Thin Film ◽  
Unbalanced Magnetron Sputtering ◽  
Unbalanced Magnetron ◽  
Doped Zno ◽  
Polyethylene Terephthalate Substrate

Al-doped ZnO films deposited on a slightly reduced buffer layer by reactive dc unbalanced magnetron sputtering

2014 ◽  
Vol 555 ◽  
pp. 93-99 ◽  
Author(s):  
Minehide Kusayanagi ◽  
Azusa Uchida ◽  
Nobuto Oka ◽  
Junjun Jia ◽  
Shin-ichi Nakamura ◽  
...  
Keyword(s):  
Magnetron Sputtering ◽  
Buffer Layer ◽  
Zno Films ◽  
Unbalanced Magnetron Sputtering ◽  
Unbalanced Magnetron ◽  
Doped Zno

Effective performance improvement of organic thin film transistors with multi-layer modifications

2020 ◽  
Vol 91 (3) ◽  
pp. 30201
Author(s):  
Hang Yu ◽  
Jianlin Zhou ◽  
Yuanyuan Hao ◽  
Yao Ni
Keyword(s):  
Thin Film ◽  
Thin Film Transistors ◽  
Performance Enhancement ◽  
Organic Thin Film Transistors ◽  
Electrical Performance ◽  
Hole Injection ◽  
Organic Thin Film ◽  
Effective Performance ◽  
Significant Performance ◽  
P Type

Organic thin film transistors (OTFTs) based on dioctylbenzothienobenzothiophene (C8BTBT) and copper (Cu) electrodes were fabricated. For improving the electrical performance of the original devices, the different modifications were attempted to insert in three different positions including semiconductor/electrode interface, semiconductor bulk inside and semiconductor/insulator interface. In detail, 4,4′,4′′-tris[3-methylpheny(phenyl)amino] triphenylamine (m-MTDATA) was applied between C8BTBTand Cu electrodes as hole injection layer (HIL). Moreover, the fluorinated copper phthalo-cyanine (F16CuPc) was inserted in C8BTBT/SiO2 interface to form F16CuPc/C8BTBT heterojunction or C8BTBT bulk to form C8BTBT/F16CuPc/C8BTBT sandwich configuration. Our experiment shows that, the sandwich structured OTFTs have a significant performance enhancement when appropriate thickness modification is chosen, comparing with original C8BTBT devices. Then, even the low work function metal Cu was applied, a normal p-type operate-mode C8BTBT-OTFT with mobility as high as 2.56 cm2/Vs has been fabricated.

A Proposal of High Performance Organic Thin Film Transistors

2010 ◽  
Vol 130 (2) ◽  
pp. 161-166
Author(s):  
Yoshinori Ishikawa ◽  
Yasuo Wada ◽  
Toru Toyabe ◽  
Ken Tsutsui
Keyword(s):  
Thin Film ◽  
Thin Film Transistors ◽  
High Performance ◽  
Organic Thin Film Transistors ◽  
Organic Thin Film

Photo-Induced Threshold and Onset Voltage Shifts in Organic Thin-Film Transistors

2013 ◽  
Vol E96.C (11) ◽  
pp. 1360-1366 ◽  
Author(s):  
Ichiro FUJIEDA ◽  
Tse Nga NG ◽  
Tomoya HOSHINO ◽  
Tomonori HANASAKI
Keyword(s):  
Thin Film ◽  
Thin Film Transistors ◽  
Organic Thin Film Transistors ◽  
Organic Thin Film ◽  
Onset Voltage

PREPARATION AND CHARACTERIZATION OF POLYVINYL ALCOHOL THIN FILMS FOR ORGANIC THIN FILM TRANSISTORS AND BIOMEDICAL APPLICATIONS

2018 ◽  
Vol 5 (2) ◽  
pp. 16-18
Author(s):  
Chandar Shekar B ◽  
Ranjit Kumar R ◽  
Dinesh K.P.B ◽  
Sulana Sundar C ◽  
Sunnitha S ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Thin Film Transistors ◽  
Gravimetric Method ◽  
Dip Coating ◽  
Organic Thin Film Transistors ◽  
Poly Vinyl Alcohol ◽  
Organic Thin Film ◽  
Glass Substrates ◽  
Coating Method

Thin films of poly vinyl alcohol (PVA) were prepared on pre-cleaned glass substrates by Dip Coating Method. FTIR spectrum was used to identify the functional groups present in the prepared films. The vibrational peaks observed at 1260 cm-1 and 851 cm-1 are assigned to C–C stretching and CH rocking of PVA.The characteristic band appearing at 1432 cm-1 is assigned to C–H bend of CH2 of PVA. The thickness of the prepared thin films were measured by using an electronic thickness measuring instrument (Tesatronic-TTD20) and cross checked by gravimetric method. XRD spectra indicated the amorphous nature of the films.Surface morphology of the coated films was studied by scanning electron microscope (SEM). The surface revealed no pits and pin holes on the surface. The observed surface morphology indicated that these films could be used as dielectric layer in organic thin film transistors and as drug delivery system for wound healing.

Sign in / Sign up

Export Citation Format

Share Document