Superoleophilic polyurethane sponge for highly efficient oil/water separation

2020 ◽  
Vol 10 (7) ◽  
pp. 1122-1126
Author(s):  
Xianfeng Li ◽  
Bo Lin ◽  
Chen Zheng ◽  
Zhimin Li ◽  
Peng Wang ◽  
...  
Keyword(s):  
Silicone Oil ◽  
High Water ◽  
Ethanol Solution ◽  
Immersion Method ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Polyurethane Sponge ◽  
Oil Water ◽  
Oil Spill Remediation

A superoleophilic polyurethane sponge had been constructed by means of an immersion method in an ethanol solution of n-octadecyltrichlorosilane. SEM, FTIR, TGA, and XPS unanimously confirmed that PODS had been successfully coated onto the skeleton of polyurethane sponge. The PODS-modified sponge displayed both excellent hydrophobicity with high water contact angle of 152° and good oil affinity. The PODS-modified sponge took the high adsorptive capabilities for the silicone oil, toluene, and peanut oil with 62.1, 73.7, and 98.2 g · g–1 after 50 cycles of extrusion-release, respectively. The superoleophilic sponge in this work exhibited promising opportunities on the oil/water separation and the oil spill remediation.

Design and fabrication of polydopamine based superhydrophobic fabrics for efficient oil-water separation

Soft Matter ◽  
2021 ◽  
Author(s):  
Jixi Zhang ◽  
Ligui Zhang ◽  
Xiao Gong
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Sol Gel ◽  
High Water ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Fabric Surface

In this work, we prepare a PDMS-SiO2-PDA@fabric with high water contact angle (WCA=155o). Combining dopamine self-polymerization and sol-gel method, SiO2 is in situ grown on a PDA-modified fabric surface to...

scholarly journals Fabrication of durable superhydrophobic/oleophilic cotton fabric for highly efficient oil/water separation

2020 ◽  
Author(s):  
M. E. Mohamed ◽  
B. A. Abd-El-Nabey
Keyword(s):  
Cotton Fabric ◽  
Mechanical Stability ◽  
Separation Efficiency ◽  
Silicone Oil ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Coating Method ◽  
Oil Water Separation ◽  
Oil Water

Abstract In the present work, dopamine is self-polymerized on cotton fabric by a simple deep-coating method and followed by modification with an ethanolic solution of palmitic acid: a superhydrophobic/oleophilic cotton fabric was obtained. The as-prepared cotton fabric exhibits a superhydrophobic character with a water contact angle of 157o. The absorption capacity of as-prepared superhydrophobic/oleophilic cotton fabric in n-hexane, petroleum ether, and silicone oil was determined. The results show that silicone oil has the highest absorption capacity while n-hexane has the lowest value. The absorption capacity is nearly constant even after ten cycles, indicating the efficient recyclability of the as-prepared superhydrophobic/oleophilic cotton fabric for oil separation. The as-prepared superhydrophobic/oleophilic cotton fabric shows excellent separation efficiency, high flux rate, and excellent chemical and mechanical stability.

Ultra Fast Oil-Water Separation for Different Viscous Oil Using Flourine-Free, Reusable, Superhydrophobic Polyurethane Sponge

2020 ◽  
Vol 20 (3) ◽  
pp. 1540-1553 ◽  
Author(s):  
Jing Ma ◽  
Weihui Zhu ◽  
Patrick Osei Lartey ◽  
Wen Qin
Keyword(s):  
Contact Angle ◽  
Graphene Oxide ◽  
High Temperature ◽  
Reduced Graphene Oxide ◽  
Water Contact ◽  
Water Separation ◽  
Reduced Graphene ◽  
Oil Water Separation ◽  
Polyurethane Sponge ◽  
Oil Water

To exploit new adsorbents for oil-spill cleanup, a superhydrophobic material was fabricated by hightemperature reduced graphene oxide (HRGO) coated on commercial polyurethane (PU) sponge via facile dip-coating process. Compared with chemical reagent reduced graphene oxide, the graphene showed expanded sheets and vast surface area, which ensured the water contact angle of this synthesized sponge reached 150.0±2.5°. In order to break the boundary of poor adhesion of graphene on sponge skeleton, a simple approach of sealed thermal treatment was adopted in our work. And then the high-temperature reduced graphene oxide/polyurethane sponge treated with binary flourine-free organosilanes solution showed superhydrophobicity with high water contact angle (162.4±1.0°). Silanes addition also endowed the resultant sponge with enhanced interfacial adhesion on PU skeleton owing to interconnected structure. The as-prepared sponge displayed excellent adsorption capacity, which was 48–74 times of its own weight for different organic solvents and oils, and no decrease of the adsorption capacity was observed after 20 cycles. Besides, for the very sticky oil, the Joule-heat generated in the sponge by applied voltage could reduce the viscosity of oil. With the assistance of Joule-heat, the silane modified high-temperature reduced graphene oxide/polyurethane sponge achieved effective oil-water separation and greatly speeded up the separation efficiency. Additionally, whether in various temperature or corrosive conditions, the superhydrophobicity of the sponge almost remained stable, which was promising for oil/water treatment.

scholarly journals Fabrication of silica/PVA-co-PE nanofiber membrane for oil/water separation

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yuanli Chen ◽  
Hui Fan ◽  
Xinlin Zha ◽  
Wenwen Wang ◽  
Yi Wu ◽  
...  
Keyword(s):  
High Efficiency ◽  
Silicone Oil ◽  
Hydroxyl Groups ◽  
Water Mixture ◽  
Silica Nanospheres ◽  
Nanofiber Membrane ◽  
Water Separation ◽  
Oil Water Separation ◽  
Silica Nanostructures ◽  
Oil Water

AbstractHigh efficiency and anti-pollution oil/water separation membrane has been widely explored and researched. There are a large number of hydroxyl groups on the surface of silica, which has good wettability and can be used for oil-water separation membranes. Hydrophilic silica nanostructures with different morphologies were synthesized by changing templates and contents of trimethylbenzene (TMB). Here, silica nanospheres with radical pores, hollow silica nanospheres and worm-like silica nanotubes were separately sprayed on the PVA-co-PE nanofiber membrane (PM). The abundance of hydroxyl groups and porous structures on PM surfaces enabled the absorption of silica nanospheres through hydrogen bonds. Compared with different silica nanostructures, it was found that the silica/PM exhibited excellent super-hydrophilicity in air and underwater “oil-hating” properties. The PM was mass-produced in our lab through melt-extrusion-phase-separation technique. Therefore, the obtained membranes not only have excellent underwater superoleophobicity but also have a low-cost production. The prepared silica/PM composites were used to separate n-hexane/water, silicone oil/water and peanut oil water mixtures via filtration. As a result, they all exhibited efficient separation of oil/water mixture through gravity-driven filtration.

scholarly journals Complex Aerogels Generated from Nano-Polysaccharides and Its Derivatives for Oil–Water Separation

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1593 ◽  
Author(s):  
Hajo Yagoub ◽  
Liping Zhu ◽  
Mahmoud H. M. A. Shibraen ◽  
Ali A. Altam ◽  
Dafaalla M. D. Babiker ◽  
...  
Keyword(s):  
Guar Gum ◽  
Corn Oil ◽  
Cellulose Nanofibers ◽  
Aqueous Media ◽  
Three Dimensional ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

The complex aerogel generated from nano-polysaccharides, chitin nanocrystals (ChiNC) and TEMPO-oxidized cellulose nanofibers (TCNF), and its derivative cationic guar gum (CGG) is successfully prepared via a facile freeze-drying method with glutaraldehyde (GA) as cross-linkers. The complexation of ChiNC, TCNF, and CGG is shown to be helpful in creating a porous structure in the three-dimensional aerogel, which creates within the aerogel with large pore volume and excellent compressive properties. The ChiNC/TCNF/CGG aerogel is then modified with methyltrichlorosilane (MTCS) to obtain superhydrophobicity/superoleophilicity and used for oil–water separation. The successful modification is demonstrated through FTIR, XPS, and surface wettability studies. A water contact angle of 155° on the aerogel surface and 150° on the surface of the inside part of aerogel are obtained for the MTCS-modified ChiNC/TCNF/CGG aerogel, resulting in its effective absorption of corn oil and organic solvents (toluene, n-hexane, and trichloromethane) from both beneath and at the surface of water with excellent absorption capacity (i.e., 21.9 g/g for trichloromethane). More importantly, the modified aerogel can be used to continuously separate oil from water with the assistance of a vacuum setup and maintains a high absorption capacity after being used for 10 cycles. The as-prepared superhydrophobic/superoleophilic ChiNC/TCNF/CGG aerogel can be used as a promising absorbent material for the removal of oil from aqueous media.

Sign in / Sign up

Export Citation Format

Share Document