Numerical Investigation of Magneto-Natural Heat Transfer in Nanofluid Filled Inclined Enclosure

2020 ◽  
Vol 9 (2) ◽  
pp. 98-105
Author(s):  
L. Eljamali ◽  
R. Sehaqui
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Hartmann Number ◽  
Temperature Profiles ◽  
Governing Equations ◽  
Alternating Direction Implicit ◽  
Alternating Direction ◽  
Inclined Enclosure ◽  
Vertical Walls

This paper examines the natural convection in an inclined enclosure that is filled with a water-copper nanofluid and influenced by a magnetic field applied normal to the plane of the cavity. The horizontal walls are assumed to be insulated while the side vertical walls of the cavity are heated differentially. The governing equations are re-formulated in functions of stream function and vorticity. The resulting boundary value problem is solved numerically using an ADI method (alternating direction implicit). A variety of plots showing the velocity and temperature profiles and the influence of Hartmann number as well as Rayleigh number on the streamlines and isotherms are shown.

A Differential Quadrature Solution of MHD Natural Convection in an Inclined Enclosure With a Partition

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Kamil Kahveci ◽  
Semiha Öztuna
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Inclination Angle ◽  
Hartmann Number ◽  
Differential Quadrature ◽  
Flow And Heat Transfer ◽  
Inclined Enclosure ◽  
Vorticity Generation

Magnetohydrodynamics natural convection in an inclined enclosure with a partition is studied numerically using a differential quadrature method. Governing equations for the fluid flow and heat transfer are solved for the Rayleigh number varying from 104 to 106, the Prandtl numbers (0.1, 1, and 10), four different Hartmann numbers (0, 25, 50, and 100), the inclination angle ranging from 0degto90deg, and the magnetic field with the x and y directions. The results show that the convective flow weakens considerably with increasing magnetic field strength, and the x-directional magnetic field is more effective in reducing the convection intensity. As the inclination angle increases, multicellular flows begin to develop on both sides of the enclosure for higher values of the Hartmann number if the enclosure is under the x-directional magnetic field. The vorticity generation intensity increases with increase of Rayleigh number. On the other hand, increasing Hartmann number has a negative effect on vorticity generation. With an increase in the inclination angle, the intensity of vorticity generation is observed to shift to top left corners and bottom right corners. Vorticity generation loops in each region of enclosure form due to multicelluar flow for an x-directional magnetic field when the inclination angle is increased further. In addition, depending on the boundary layer developed, the vorticity value on the hot wall increases first sharply with increasing y and then begins to decrease gradually. For the high Rayleigh numbers, the average Nusselt number shows an increasing trend as the inclination angle increases and a peak value is detected. Beyond the peak point, the foregoing trend reverses to decrease with the further increase of the inclination angle. The results also show that the Prandtl number has only a marginal effect on the flow and heat transfer.

scholarly journals Effect of Perpendicular Magnetic Field on Free Convection in a Rectangular Cavity

2015 ◽  
Vol 20 (2) ◽  
pp. 49 ◽  
Author(s):  
Anand Kumar ◽  
Ashok K. Singh ◽  
Pallath Chandran ◽  
Nirmal C. Sacheti
Keyword(s):  
Magnetic Field ◽  
Stream Function ◽  
Governing Equations ◽  
Free Convective Flow ◽  
Alternating Direction Implicit ◽  
Electrically Conducting ◽  
Electrically Conducting Fluid ◽  
Alternating Direction ◽  
Vertical Walls ◽  
The Magnetic Field

The steady free convective flow of a viscous incompressible and electrically conducting fluid in a two-dimensional cavity in the presence of a magnetic field applied normal to the plane of the cavity is investigated. The side vertical walls of the cavity are heated differentially while the horizontal walls are assumed to be insulated. The governing equations are re-formulated in terms of vorticity and stream function. The resulting boundary value problem is solved numerically using an alternating direction implicit (ADI) method. A number of plots illustrating the influence of Hartmann number and Rayleigh number on the streamlines and isotherms as well as the velocity and temperature profiles are shown. Furthermore, results for the average Nusselt number and the maximum absolute stream function have been obtained, and these are compared with the corresponding results in the literature when the magnetic field is applied along the cavity in the horizontal direction.  

scholarly journals CuO–Water Nanofluid Magnetohydrodynamic Natural Convection inside a Sinusoidal Annulus in Presence of Melting Heat Transfer

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
M. Sheikholeslami ◽  
R. Ellahi ◽  
C. Fetecau
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Melting Heat ◽  
Melting Heat Transfer ◽  
Limiting Case ◽  
Good Agreement ◽  
Melting Parameter

Impact of nanofluid natural convection due to magnetic field in existence of melting heat transfer is simulated using CVFEM in this research. KKL model is taken into account to obtain properties of CuO–H2O nanofluid. Roles of melting parameter (δ), CuO–H2O volume fraction (ϕ), Hartmann number (Ha), and Rayleigh (Ra) number are depicted in outputs. Results depict that temperature gradient improves with rise of Rayleigh number and melting parameter. Nusselt number detracts with rise of Ha. At the end, a comparison as a limiting case of the considered problem with the existing studies is made and found in good agreement.

Comparative Numerical Simulation of Natural Convection in a Porous Horizontal Cylindrical Annulus

2014 ◽  
Vol 670-671 ◽  
pp. 613-616 ◽  
Author(s):  
Jabrane Belabid ◽  
Abdelkhalek Cheddadi
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Saturated Porous Medium ◽  
Published Data ◽  
Governing Equations ◽  
Alternating Direction Implicit ◽  
Cylindrical Annulus ◽  
Alternating Direction ◽  
Concentric Cylinders ◽  
Good Agreement

This work presents a numerical study of the natural convection in a saturated porous medium bounded by two horizontal concentric cylinders. The governing equations (in the stream function and temperature formulation) were solved using the ADI (Alternating Direction Implicit) method and the Samarskii-Andreev scheme. A comparison between the two methods is conducted. In both cases, the results obtained for the heat transfer rate given by the Nusselt number are in a good agreement with the available published data.

scholarly journals Hydrothermal and Entropy Investigation of Ag/MgO/H2O Hybrid Nanofluid Natural Convection in a Novel Shape of Porous Cavity

2021 ◽  
Vol 11 (4) ◽  
pp. 1722
Author(s):  
Nidal Abu-Libdeh ◽  
Fares Redouane ◽  
Abderrahmane Aissa ◽  
Fateh Mebarek-Oudina ◽  
Ahmad Almuhtady ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Hybrid Nanofluid ◽  
The Finite Element Method ◽  
Governing Equations ◽  
Nanofluid Flow ◽  
The Magnetic Field

In this study, a new cavity form filled under a constant magnetic field by Ag/MgO/H2O nanofluids and porous media consistent with natural convection and total entropy is examined. The nanofluid flow is considered to be laminar and incompressible, while the advection inertia effect in the porous layer is taken into account by adopting the Darcy–Forchheimer model. The problem is explained in the dimensionless form of the governing equations and solved by the finite element method. The results of the values of Darcy (Da), Hartmann (Ha) and Rayleigh (Ra) numbers, porosity (εp), and the properties of solid volume fraction (ϕ) and flow fields were studied. The findings show that with each improvement in the Ha number, the heat transfer rate becomes more limited, and thus the magnetic field can be used as an outstanding heat transfer controller.

scholarly journals Heat transfer augmentation of magnetohydrodynamics natural convection in L-shaped cavities utilizing nanofluids

2012 ◽  
Vol 16 (2) ◽  
pp. 489-501 ◽  
Author(s):  
Ehsan Sourtiji ◽  
Seyed Hosseinizadeh
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Flow Field ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
The Magnetic Field

A numerical study of natural convection heat transfer through an alumina-water nanofluid inside L-shaped cavities in the presence of an external magnetic field is performed. The study has been carried out for a wide range of important parame?ters such as Rayleigh number, Hartmann number, aspect ratio of the cavity and solid volume fraction of the nanofluid. The influence of the nanoparticle, buoyancy force and the magnetic field on the flow and temperature fields have been plotted and discussed. The results show that after a critical Rayleigh number depending on the aspect ratio, the heat transfer in the cavity rises abruptly due to some significant changes in flow field. It is also found that the heat transfer enhances in the presence of the nanoparticles and increases with solid volume fraction of the nanofluid. In addition, the performance of the nanofluid utilization is more effective at high Ray?leigh numbers. The influence of the magnetic field has been also studied and de?duced that it has a remarkable effect on the heat transfer and flow field in the cavity that as the Hartmann number increases the overall Nusselt number is significantly decreased specially at high Rayleigh numbers.

Numerical simulation of natural convection within wavy square enclosure filled with nanofluid under magnetic field using EFGM with parallel algorithm

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Surabhi Nishad ◽  
Sapna Jain ◽  
Rama Bhargava
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Rate ◽  
Inclination Angle ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Content Type ◽  
The Magnetic Field ◽  
Field Inclination

Purpose This paper aims to study the flow and heat transfer inside a wavy enclosure filled with Cu-water nanofluid under magnetic field effect by parallel implemented meshfree approach. Design/methodology/approach The simulation has been carried out for a two-dimensional model with steady, laminar and incompressible flow of the nanofluid filled inside wavy enclosure in which one of the walls is sinusoidal such that the amplitude (A = 0.15) and number of undulations (n = 2) are fixed. A uniform magnetic field B0 has been applied at an inclination angle γ. The governing equations for the transport phenomena have been solved numerically by implementing element-free Galerkin method (EFGM) with the sequential as well as parallel approach. The effect of various parameters, namely, nanoparticle volume fraction (φ), Rayleigh number (Ra), Hartmann number (Ha) and magnetic field inclination angle (γ) has been studied on the natural convection flow of nanofluid. Findings The results are obtained in terms of average Nusselt number calculated at the cold wavy wall, streamlines and isotherms. It has been observed that the increasing value of Rayleigh number results in increased heat transfer rate while the Hartmann number retards the fluid motion. On the other hand, the magnetic field inclination angle gives rise to the heat transfer rate up to its critical value. Above this value, the heat transfer rate starts to decrease. Originality/value The implementation of the magnetic field and its inclination has provided very interesting results on heat and fluid flow which can be used in the drug delivery where nanofluids are used in many physiological problems. Another important novelty of the paper is that meshfree method (EFGM) has been used here because the domain is irregular. The results have been found to be very satisfactory. In addition, parallelization of the scheme (which has not been implemented earlier in such problems) improves the computational efficiency.

Numerical investigation of conjugate heat transfer and entropy generation of MHD natural convection of nanofluid in an inclined enclosure

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amin Kardgar
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Wall Thickness ◽  
Conjugate Heat Transfer ◽  
Volume Fraction ◽  
Content Type ◽  
Inclined Enclosure

Purpose The purpose of this paper is to investigate conjugate heat transfer of natural convection and entropy generation of nanofluid in the presence of external magnetic field via numerical approach in an inclined square cavity enclosure. Design/methodology/approach Control volume finite volume method with collocated arrangement of grids was used for discretization of continuity, momentum, solid and fluid energy equations. Rhie and Chow interpolation technique was applied to avoid checkerboard problem in pressure field and the well-established SIMPLE algorithm was followed to deal with the pressure and velocity coupling. The cavity is filled with water and nanoparticles of the aluminum oxide (Al2O3). This study has been conducted for the certain pertinent parameters of the volume fraction of nanoparticle (φ = 0–0.08), the angle of inclination (ϴ = 0°–330°), the Ra number (Ra = 103–108), the solid to fluid conductivity ratio (ksf = 1–400), the Ha number (Ha = 0–80) and the wall thickness ratio (δ/L = 0–0.3). Findings The results indicate that averaged Nu number increases by approximately 9% by increasing volume fraction from 0.0 to 0.08. Nu increases with an increasing inclination angle to 40° and decreases abruptly in 90° because of the formation of two weaker vorticity with opposite circulation pattern intensifying the density of isotherm curves in a vertical direction. Nu increases sharply with increasing Ra more than 105. Nu also augments almost 67% by increasing ksf = 1 to ksf = 50 and remains constant by increasing ksf more than 50. Nu number reduction is almost 72% with a variation of wall thickness ratio from d/L = 0 to 0.3. Entropy generation because of fluid flow, magnetic field and heat transfer reduces linearly almost 30%, 19% and 16% by increasing volume fraction, respectively. With increasing ksf, entropy generation because of fluid flow, magnetic field and heat transfer increases asymptotically, but Bejan number decreases. Originality/value A brief review of conducted research studies in nanofluid flow and heat transfer reveals that the effect of wall thermal inertia was not investigated in MHD natural convection of nanofluids in an inclined enclosure. The aim of the present study is to analyze conjugate heat transfer in an inclined cavity filled with water and Al2O3.

scholarly journals Turbulent natural convection heat transfer in a square cavity with nanofluids in presence of inclined magnetic field

2021 ◽  
pp. 326-326
Author(s):  
Mohamed El Hattab ◽  
Zakaria Lafdaili
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Orientation Angle ◽  
Inclined Magnetic Field ◽  
Square Cavity ◽  
Turbulent Natural Convection

In this paper, we present a numerical study of turbulent natural convection in a square cavity differentially heated and filled with nanofluid and subjected to an inclined magnetic field. The standard k-? model was used as the turbulence model. The transport equations were discretized by the finite volume method using the SIMPLE algorithm. The influence of the Rayleigh number, the Hartmann number, the orientation angle of the applied magnetic field, the type of nanoparticles as well as the volume fraction of nanoparticles, on the hydrodynamic and thermal characteristics of the nanofluid was illustrated and discussed in terms of streamlines, isotherms and mean Nusselt number. The results obtained show that the heat transfer rate increases with increasing Rayleigh number and orientation angle of the magnetic field but it decreases with increasing Hartmann number. In addition, heat transfer improves with increasing volume fraction and with the use of Al2O3 nanoparticles.

Effects of a Magnetic Field on Natural Convection in a Toroidal Channel

1962 ◽  
Vol 29 (3) ◽  
pp. 559-567 ◽  
Author(s):  
Paul Concus
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Hartmann Number ◽  
Convective Motion ◽  
Liquid Sodium ◽  
Fixed Temperature ◽  
Horizontal Magnetic Field ◽  
Thermally Conducting ◽  
Solid Block

The problem of the natural convection of an electrically and thermally conducting fluid within a long, narrow, vertical toroidial channel centered in a large block of an electrically and thermally conducting solid is analyzed. A uniform horizontal magnetic field is applied to the fluid, and the bottom of the solid block is maintained at a higher fixed temperature than the top. The laminar, steady-state, single-cell convective motion of the fluid is considered and an approximate solution is found for the heat-transfer rate between the bottom and top surfaces of the block in the limiting cases of small and large Hartmann number. A numerical example is given for liquid sodium in which the application of a magnetic field of a few hundred gauss is shown to reduce the rate of heat transfer significantly.

Sign in / Sign up

Export Citation Format

Share Document