Improvement of Near-Infrared Persistent Luminescence in Lithium Substituted MgGa2O4:Cr3+ Nanocrystals

2020 ◽  
Vol 15 (5) ◽  
pp. 630-636
Author(s):  
Yue Xu ◽  
Cuiwei Xue ◽  
Shengnan Xue ◽  
Qi Zhu
Keyword(s):  
Oxygen Vacancies ◽  
Near Infrared ◽  
Uv Light ◽  
Sol Gel ◽  
Persistent Luminescence ◽  
Tetrahedral Sites ◽  
Uv Light Irradiation ◽  
Nir Emission ◽  
Gel Processing

Near infrared (NIR) persistent phosphors can exhibit NIR emission for a long period of time after the remove of irradiation, and they have attracted much attention since the demonstration that NIR persistent luminescent nano-sized particles can be used for in vivo imaging. Here, a new NIR persistent luminescence material of lithium substituted MgGa2O4:Cr3+ (termed as MGO:Cr3+, Li+) has been successfully synthesized by sol–gel processing. The MGO:Cr3+, Li+ mainly consists of ∼40–100 nm nanocrystals, which are of single crystalline with excellent crystallinity. Li+ ions occupying the tetrahedral sites (Mg site) does not significantly affect the crystal structure, but it induces a broader band gap. In the processing of substitution for the Mg2+ site by Li+, oxygen vacancies appear that can efficiently store the excited electrons by UV light irradiation and contribute to the improved persistent luminescence. Mg vacancy arising from a higher calcination temperature tends to store visible light, which also contributes to the enhanced afterglow intensity.

ChemInform Abstract: Non-aqueous Sol-Gel Synthesis of Ultra Small Persistent Luminescence Nanoparticles for Near-Infrared in vivo Imaging.

ChemInform ◽  
2015 ◽  
Vol 46 (32) ◽  
pp. no-no
Author(s):  
Eliott Teston ◽  
Sophie Richard ◽  
Thomas Maldiney ◽  
Nicole Lievre ◽  
Guillaume Yangshu Wang ◽  
...  
Keyword(s):  
In Vivo Imaging ◽  
Near Infrared ◽  
Sol Gel ◽  
Persistent Luminescence ◽  
Sol Gel Synthesis

scholarly journals Inside Back Cover: Non-Aqueous Sol-Gel Synthesis of Ultra Small Persistent Luminescence Nanoparticles for Near-Infrared In Vivo Imaging (Chem. Eur. J. 20/2015)

2015 ◽  
Vol 21 (20) ◽  
pp. 7623-7623
Author(s):  
Eliott Teston ◽  
Sophie Richard ◽  
Thomas Maldiney ◽  
Nicole Lièvre ◽  
Guillaume Yangshu Wang ◽  
...  
Keyword(s):  
In Vivo Imaging ◽  
Near Infrared ◽  
Sol Gel ◽  
Persistent Luminescence ◽  
Back Cover ◽  
Sol Gel Synthesis

Non-Aqueous Sol-Gel Synthesis of Ultra Small Persistent Luminescence Nanoparticles for Near-Infrared In Vivo Imaging

2015 ◽  
Vol 21 (20) ◽  
pp. 7350-7354 ◽  
Author(s):  
Eliott Teston ◽  
Sophie Richard ◽  
Thomas Maldiney ◽  
Nicole Lièvre ◽  
Guillaume Yangshu Wang ◽  
...  
Keyword(s):  
In Vivo Imaging ◽  
Near Infrared ◽  
Sol Gel ◽  
Persistent Luminescence ◽  
Sol Gel Synthesis

scholarly journals Persistent luminescence nanoparticles for cancer theranostics application

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Nian Liu ◽  
Xiao Chen ◽  
Xia Sun ◽  
Xiaolian Sun ◽  
Junpeng Shi
Keyword(s):  
Uv Light ◽  
Combined Therapy ◽  
Tumor Therapy ◽  
High Sensitivity ◽  
Persistent Luminescence ◽  
Therapeutic Drugs ◽  
High Penetration ◽  
Recent Developments ◽  
Cancer Theranostics

AbstractPersistent luminescence nanoparticles (PLNPs) are unique optical materials that emit afterglow luminescence after ceasing excitation. They exhibit unexpected advantages for in vivo optical imaging of tumors, such as autofluorescence-free, high sensitivity, high penetration depth, and multiple excitation sources (UV light, LED, NIR laser, X-ray, and radiopharmaceuticals). Besides, by incorporating other functional molecules, such as photosensitizers, photothermal agents, or therapeutic drugs, PLNPs are also widely used in persistent luminescence (PersL) imaging-guided tumor therapy. In this review, we first summarize the recent developments in the synthesis and surface functionalization of PLNPs, as well as their toxicity studies. We then discuss the in vivo PersL imaging and multimodal imaging from different excitation sources. Furthermore, we highlight PLNPs-based cancer theranostics applications, such as fluorescence-guided surgery, photothermal therapy, photodynamic therapy, drug/gene delivery and combined therapy. Finally, future prospects and challenges of PLNPs in the research of translational medicine are also discussed.

scholarly journals TiO2-Powdered Activated Carbon (TiO2/PAC) for Removal and Photocatalytic Properties of 2-Methylisoborneol (2-MIB) in Water

Water ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1622
Author(s):  
Xiao-Pin Guo ◽  
Peng Zang ◽  
Yong-Mei Li ◽  
Dong-Su Bi
Keyword(s):  
Activated Carbon ◽  
Natural Organic Matter ◽  
Uv Light ◽  
Sol Gel ◽  
Light Irradiation ◽  
Nano Tio2 ◽  
Uv Light Irradiation ◽  
Adsorption Capacities ◽  
Taste And Odor ◽  
Composite Photocatalysts

2-methylisoborneol (2-MIB) is a common taste and odor compound caused by off-flavor secondary metabolites, which represents one of the greatest challenges for drinking water utilities worldwide. A TiO2-coated activated carbon (TiO2/PAC) has been synthesized using the sol-gel method. A new TiO2/PAC photocatalyst has been successfully employed in photodegradation of 2-MIB under UV light irradiation. In addition, the combined results of XRD, SEM-EDX, FTIR and UV-Vis suggested that the nano-TiO2 had been successfully loaded on the surface of PAC. Experimental results of 2-MIB removal indicated that the adsorption capacities of PAC for 2-MIB were higher than that of TiO2/PAC. However, in the natural organic matter (NOM) bearing water, the removal efficiency of 2-MIB by TiO2/PAC and PAC were 97.8% and 65.4%, respectively, under UV light irradiation. Moreover, it was shown that the presence of NOMs had a distinct effect on the removal of MIB by TiO2/PAC and PAC. In addition, a simplified equivalent background compound (SEBC) model could not only be used to describe the competitive adsorption of MIB and NOM, but also represent the photocatalytic process. In comparison to other related studies, there are a few novel composite photocatalysts that could efficiently and rapidly remove MIB by the combination of adsorption and photocatalysis.

Near-infrared persistent luminescence hollow mesoporous nanospheres for drug delivery and in vivo renewable imaging

2016 ◽  
Vol 4 (48) ◽  
pp. 7845-7851 ◽  
Author(s):  
Junpeng Shi ◽  
Meng Sun ◽  
Xia Sun ◽  
Hongwu Zhang
Keyword(s):  
Drug Delivery ◽  
Near Infrared ◽  
High Sensitivity ◽  
Drug Carriers ◽  
Template Method ◽  
Persistent Luminescence ◽  
Deep Tissue ◽  
Large Capacity

Near-infrared persistent luminescence hollow mesoporous nanospheres have been synthesized via a template method. These nanospheres can be used as large capacity drug carriers and realize super long-term and high sensitivity tracking of drug delivery in deep tissue.

Persistent Luminescence Cr3+ Doped Spinels and Use as Biomarker for In Vivo Imaging

2014 ◽  
Vol 90 ◽  
pp. 157-165
Author(s):  
Suchinder K. Sharma ◽  
D. Gourier ◽  
B. Viana ◽  
T. Maldiney ◽  
E. Teston ◽  
...  
Keyword(s):  
Uv Light ◽  
Red Light ◽  
Band Gap Energy ◽  
Transparency Window ◽  
Persistent Luminescence ◽  
High Brightness ◽  
Mouse Imaging ◽  
Classical Quantum ◽  
Living Tissues

ZnGa2O4(ZGO) is a normal spinel. When doped with Cr3+ions, ZGO:Cr becomes a high brightness persistent luminescence material with an emission spectrum perfectly matching the transparency window of living tissues. It allowsin vivomouse imaging with a better signal to background ratio than classical quantum dots. The most interesting characteristic of ZGO:Cr lies in the fact that its LLP can be excited with red light, well below its band gap energy and in the transparency window of living tissues. A mechanism based on the trapping of carriers localized around a special type of Cr3+ions namely CrN2can explain this singularity. The antisite defects of the structure are the main responsible traps in the persistent luminescence mechanism. When located around Cr3+ions, they allow, via Cr3+absorption, the storage of not only UV light but also all visible light from the excitation source.

Preparation and Photocatalytic Activity of TiO2/Opal Composite

2013 ◽  
Vol 668 ◽  
pp. 13-16
Author(s):  
Qing Shan Li ◽  
Biao Zhan ◽  
Wei Hong ◽  
Guang Zhong Xing
Keyword(s):  
Methylene Blue ◽  
Uv Light ◽  
Sol Gel ◽  
Tetrabutyl Titanate ◽  
Methylene Blue Solution ◽  
Photocatalytic Decolorization ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Blue Solution ◽  
Gel Technique

Opal as a carrier, tetrabutyl titanate as a titanium source, TiO2 loaded on opal was prepared by sol-gel technique. The photocatalysts were characterized by XRD, TEM and UV-VIS absorption spectrum. Their photocatalytic activities were examined by the photocatalytic decolorization of methylene blue solution under UV light irradiation. The effects of calcination temperature, the amount of TiO2 loading and pH on photocatalytic activities were discussed. The results show that TiO2 supported on opal induced enhancement of photocatalytic decolorization rant and TiO2 doping is about 30 wt. % with 92.15% of decolorization rate at 700°C.

scholarly journals Luminescent Electrochromic Devices for Smart Windows of Energy-Efficient Buildings

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3513 ◽  
Author(s):  
Mariana Fernandes ◽  
Vânia Freitas ◽  
Sónia Pereira ◽  
Rita Leones ◽  
Maria Silva ◽  
...  
Keyword(s):  
Energy Efficient ◽  
Near Infrared ◽  
Sol Gel ◽  
Average Molecular Weight ◽  
The Novel ◽  
Electrochromic Devices ◽  
Lithium Triflate ◽  
Smart Windows ◽  
Energy Efficient Buildings ◽  
Nir Emission

To address the challenges of the next generation of smart windows for energy-efficient buildings, new electrochromic devices (ECDs) are introduced. These include indium molybdenum oxide (IMO), a conducting oxide transparent in the near-infrared (NIR) region, and a NIR-emitting electrolyte. The novel electrolytes are based on a sol-gel-derived di-urethane cross-linked siloxane-based host structure, including short chains of poly (ε-caprolactone) (PCL(530) (where 530 represents the average molecular weight in g mol−1). This hybrid framework was doped with a combination of either, lithium triflate (LiTrif) and erbium triflate (ErTrif3), or LiTrif and bisaquatris (thenoyltrifluoroacetonate) erbium (III) ([Er(tta)3(H2O)2]). The ECD@LiTrif-[Er(tta)3(H2O)2] device presents a typical Er3+ NIR emission around 1550 nm. The figures of merit of these devices are high cycling stability, good reversibility, and unusually high coloration efficiency (CE = ΔOD/ΔQ, where Q is the inserted/de-inserted charge density). CE values of −8824/+6569 cm2 C−1 and −8243/+5200 cm2 C−1 were achieved at 555 nm on the 400th cycle, for ECD@LiTrif-ErTrif3 and ECD@LiTrif-[Er(tta)3(H2O)2], respectively.

Sign in / Sign up

Export Citation Format

Share Document