scholarly journals Preparation of High Refractiv Index Hybrid Latex Films Containing ZrO2 Particles

2013 ◽  
Vol 49 (5) ◽  
pp. 183-190
Author(s):  
Sho HAKOZAKI ◽  
Kazushi ENOMOTO ◽  
Atsushi NARUMI ◽  
Seigou KAWAGUCHI
Keyword(s):  
Latex Films ◽  
Hybrid Latex

Cure-Dependent Morphology of Acrylic/Alkyd Hybrid Latex Films via Nanomechanical Mapping

2019 ◽  
Vol 1 (8) ◽  
pp. 2213-2223 ◽  
Author(s):  
Elodie Limousin ◽  
Daniel E. Martinez-Tong ◽  
Nicholas Ballard ◽  
José M. Asua
Keyword(s):  
Latex Films ◽  
Hybrid Latex

Fabrication and properties of chemically bonded polysilsesquioxane-polyacrylate/silica hybrid latex films with high silicon content

2014 ◽  
Vol 36 (2) ◽  
pp. 389-396 ◽  
Author(s):  
Qingyu Han ◽  
Yongbing Pei ◽  
Ying Zhong ◽  
Kai Zhang ◽  
Longcheng Tang ◽  
...  
Keyword(s):  
Silicon Content ◽  
Latex Films ◽  
High Silicon Content ◽  
High Silicon ◽  
Hybrid Latex ◽  
Silica Hybrid

scholarly journals Cross-Linked Network Development in Compatibilized Alkyd/Acrylic Hybrid Latex Films for the Creation of Hard Coatings

Langmuir ◽  
2010 ◽  
Vol 26 (17) ◽  
pp. 14323-14333 ◽  
Author(s):  
Tao Wang ◽  
Carolina de las Heras Alarcón ◽  
Monika Goikoetxea ◽  
Itxaso Beristain ◽  
Maria Paulis ◽  
...  
Keyword(s):  
Hard Coatings ◽  
Network Development ◽  
Latex Films ◽  
The Creation ◽  
Hybrid Latex

Effect of Filler Dispersion on Tensile Strength and Tearing Energy of Natural Rubber (NR) Latex Films

2015 ◽  
Vol 1134 ◽  
pp. 56-60 ◽  
Author(s):  
Siti Aisyah Jarkasi ◽  
Dzaraini Kamarun ◽  
Azemi Samsuri ◽  
Amir Hashim Md Yatim
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Latex Film ◽  
High Tensile Strength ◽  
Latex Films ◽  
Optimum Amount ◽  
Dispersing Agent ◽  
Two Factors ◽  
Filler Dispersion ◽  
Tearing Energy

Fillers play important roles in enhancing mechanical properties of NR latex films. The effect of filler dispersion and amount of dispersing agent to the tensile strength and tearing energy of NR latex films were investigated in this study. The studies were carried out by (i) varying the amount of dispersing agent (Anchoid) added which is an anionic surfactant; and (ii) varying the speed of stirring during mixing of latex with compounding ingredients. It was observed that tensile strength and tearing energy were affected by both factors listed. In the case of NR latex film filled with 10 pphr of carbon black (Super Abrasion Furnace, SAF), the optimum stirring speed was 400 rpm and the optimum amount of surfactant was in the range of 5 to 10 % by weight. High tensile strength ranging from 29 - 31 MPa and high tearing energies ranging from 90.6 - 111.0 kJ/m2were achieved from optimization of these two factors; rendering their importance.

Structural evolution and acoustic phonon behavior in crystalline PTFE latex films

2003 ◽  
Vol 779 ◽  
Author(s):  
M. Pierno ◽  
C.S. Casari ◽  
A. Li Bassi ◽  
M.G. Beghi ◽  
R. Piazza ◽  
...  
Keyword(s):  
Structural Evolution ◽  
Crystalline Polymer ◽  
Model Systems ◽  
Fibrillar Structure ◽  
Sintering Process ◽  
Latex Films ◽  
Force Microscopy ◽  
Crystalline Polymers ◽  
Atomic Force ◽  
Acoustic Excitations

AbstractThe structural evolution of polytetrafluoroethylene (PTFE) crystalline polymer latex films is studied at hundreds nanometer length scale by atomic force microscopy and Brillouin light scattering. In a controlled sintering process the transition is observed from the original particle distribution towards a ‘fibrillar’ structure of crystalline regions embedded in a disordered matrix. This transition is accompanied by a cross-over from localized acoustic excitations to propagating acoustic phonons, related to mesoscopic elastic properties. After sintering, a ‘mark’ of the original particulate structure persists, suggesting that filming of crystalline polymers may be analogous to sintering of ceramic powders. Films of crystalline polymers can thus be exploited as model systems to study the elasto-optical properties of granular and disordered media.

Internal Dynamics in Drying Latex Films: A Study Based on Fluorescence Anisotropy and Acoustic Dissipation

2008 ◽  
Vol 6 (1) ◽  
pp. 1-14 ◽  
Author(s):  
Maryline Clauzel ◽  
Patrick Kékicheff ◽  
Jörg Adams ◽  
Diethelm Johannsmann
Keyword(s):  
Fluorescence Anisotropy ◽  
Latex Films ◽  
Internal Dynamics ◽  
Acoustic Dissipation

Temperature Dependence of Crack Spacing in Drying Latex Films

2006 ◽  
Vol 45 (21) ◽  
pp. 6996-7001 ◽  
Author(s):  
Wai Peng Lee ◽  
Alexander F. Routh
Keyword(s):  
Temperature Dependence ◽  
Crack Spacing ◽  
Latex Films
Sign in / Sign up

Export Citation Format

Share Document